Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can be engaged/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can be engaged/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can be engaged/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
The Brand-X Inline Seatpost is manufactured from lightweight 6061-T6 Aluminium for strength, stiffness and durability. The 2D Forged Head and clamp feature a micro-adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black anodised finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Length: 400mmLayback: 0mmSizes: 26.4, 26.8, 27.0, 27.2, 30.9 and 31.6mmMaterial:6061-T6 AluminiumFinish: Turned and Anodised shaft/Anodised headColour: BlackIncremental height markingsEN-M ApprovedWeight: 308 grams (31.6mm)
The Ascend II XL externally routed dropper seatpost offers 170mm of travel. Ideal for taller riders or for those who like the added height adjustment, the Ascend II XL is available in both 30.9 and 31.6 seatpost diameters.AL6061-T6 AluminiumBar mounted remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero Offset one-piece head/ upper shaft with micro adjust clamping mechanismDiameter: 30.9mm or 31.6mmLength: 489mm (shaft is 264mm), Travel: 170mmCable Length: 1.5mFinish: Sand Blasted and Hard Anodised Black2 Year WarrantyWeight: 670g (31.6mm without cable/lever)Building on the success of the original Ascend, Brand- X now offer a long drop externally routed option with the Ascend II XL. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing.The post comes with an ergonomic 1X lever. The cable is actuated from the mid cap ensuring zero cable movement. For those wishing to run a 2X set up, a right-hand mount 'paddle' lever is available. The Ascend Dropper seatpost set new standards for reliability and performance at a fantastic price point.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
The Brand-X quill classic bar end is 3D forged from 1 piece of 6061-T6 Aluminium and features a gentle curve for a comfortable riding position. They can be set at any angle and will fit securely on all handlebars.Length: 140mmBar bore: 22.2mmDiameter of bar end: 22.6mmWeight: 140 grams per pairFinish: Sand Blasted and anodisedColour: Black
Introducing the Brand-X Ascend Dropper Seatpost shifter style lever kit. The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL6061-T6Bar mounted shifter style remote leverCable Length: 1.5mWeight: 40.7g (excluding cable)Adjustment: +10 degrees angle range and +7mm horizontal adjustmentFinish: Sand blasted and hard anodised blackWarranty: 2 Year
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can be engaged/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
The Brand-X Ascend II is an externally routed dropper seatpost that offers excellent performance and reliability without breaking the bank. Tweak your saddle height for what lies ahead and tackle the trail in comfort.Material: T6-6061 AluminiumBar mounted paddle style remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismLength: 400mmTravel: 125mm (27.2mm = 105mm travel)Cable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 610g (30.9mm) w/o cable and paddle shifter (90g)Building on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic paddle style lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Please Note: The 31.6 and 30.9 diameter options come with the 1x shifter style remote shown in the first image and are not suitable for use on bikes with 2X or 3X front gearing. The 27.2 diameter post comes with a 22.2 lever that is compatible with 2X or 3X front gearing.
The Brand-X Knurled Lock on Handlebars Grips are a no nonsense, solid, comfortable grip that will keep you out on the trails and keep your hands firmly where they need to be.Closed end construction with subtle in-mould 'BX' logoDouble densityAvailable in 6 coloursA25 Compound135mm x 28.5mm100% Recyclable PackagingWeight: 85g (Pair)Constructed in 2 layers, combining the firmness of hard plastic PP with the softness of an A25 Vexk rubber, the grips offer great comfort and durability. The knurled finish maintains grip in the wet and dry with closed ends there's no need to worry about bar end plugs. The one-piece construction incorporates a plastic clamp and alloy fittings to securely mount the grips.
The Ascend Dropper Seatpost offers excellent performance and reliability without breaking the bank. Its compatible with bikes that can use an internally routed dropper. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Material: AL7075-T651Bar mounted shifter style remote leverInfinitely adjustableCable operatedInternal routing onlyLinkage mechanism eliminates any outer cable pullZero Offset Head typeOne Piece head/Upper ShaftMicro Adjust clamping mechanism30.9mm or 31.6mm Diameter410mm/480mm Length120mm or 150mm TravelCable Length: 1.5mSand Blasted and Hard Anodised Black2 Year WarrantyWeight: 550g W/O Cable and Shifter (31.6mm, 120mm)The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Please note that it cannot be converted to external cable actuated.
The Ascend Dropper Seatpost offers excellent performance and reliability without breaking the bank. Its compatible with bikes that can use an internally routed dropper. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Material: AL7075-T651Bar mounted shifter style remote leverInfinitely adjustableCable operatedInternal routing onlyLinkage mechanism eliminates any outer cable pullZero Offset Head typeOne Piece head/Upper ShaftMicro Adjust clamping mechanism30.9mm or 31.6mm Diameter410mm/480mm Length120mm or 150mm TravelCable Length: 1.5mSand Blasted and Hard Anodised Black2 Year WarrantyWeight: 550g W/O Cable and Shifter (31.6mm, 120mm)The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Please note that it cannot be converted to external cable actuated.
The Ascend Dropper Seatpost offers excellent performance and reliability without breaking the bank. Its compatible with bikes that can use an internally routed dropper. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Material: AL7075-T651Bar mounted shifter style remote leverInfinitely adjustableCable operatedInternal routing onlyLinkage mechanism eliminates any outer cable pullZero Offset Head typeOne Piece head/Upper ShaftMicro Adjust clamping mechanism30.9mm or 31.6mm Diameter410mm/480mm Length120mm or 150mm TravelCable Length: 1.5mSand Blasted and Hard Anodised Black2 Year WarrantyWeight: 550g W/O Cable and Shifter (31.6mm, 120mm)The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Please note that it cannot be converted to external cable actuated.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
The Brand-X Ascend II is an externally routed dropper seatpost that offers excellent performance and reliability without breaking the bank. Tweak your saddle height for what lies ahead and tackle the trail in comfort.Material: T6-6061 AluminiumBar mounted paddle style remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismLength: 400mmTravel: 125mm (27.2mm = 105mm travel)Cable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 610g (30.9mm) w/o cable and paddle shifter (90g)Building on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic paddle style lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Please Note: The 31.6 and 30.9 diameter options come with the 1x shifter style remote shown in the first image and are not suitable for use on bikes with 2X or 3X front gearing. The 27.2 diameter post comes with a 22.2 lever that is compatible with 2X or 3X front gearing.
The Brand-X layback 6061 Seatpost is manufactured from lightweight 6061-T6 Aluminium for strength, stiffness and durability. The Head and clamp are offset by 15mm and features a micro-adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black anodised finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Length: 400mmOffset: 15mmSizes: 27.2, 30.9 and 31.6mmMaterial: 6061-T6 AluminiumFinish: Turned and Anodised shaft/Anodised headColour: BlackIncremental height markingsEN-M ApprovedWeight: 320 grams (31.6mm)
The Brand-X Ascend II is an externally routed dropper seatpost that offers excellent performance and reliability without breaking the bank. Tweak your saddle height for what lies ahead and tackle the trail in comfort.Material: T6-6061 AluminiumBar mounted paddle style remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismLength: 400mmTravel: 125mm (27.2mm = 105mm travel)Cable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 610g (30.9mm) w/o cable and paddle shifter (90g)Building on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic paddle style lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Please Note: The 31.6 and 30.9 diameter options come with the 1x shifter style remote shown in the first image and are not suitable for use on bikes with 2X or 3X front gearing. The 27.2 diameter post comes with a 22.2 lever that is compatible with 2X or 3X front gearing.