Ceramic Hybrid combines the chromium steel races found in Enduro's ABEC 5 range with Grade 5 ceramic (Silicon Nitride - Si3n4) balls found in Zero Ceramic bearings. This combination creates a lighter, more efficient and more affordable ceramic bearing, perfect for use in hubs or bottom brackets. The low contact LLB seals provide protection from water or dirt ingress, but without causing any friction or drag.Key Features: Bearing Code: 6802,Dimensions: 15mm x 24mm x 5mm,ABEC: 5,Grade: 5,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 6.38g.
This tool is for making adjustments on a bicycle when pedals are not in place or present.The Enduro Pedal Dummy Tool stainless steel shaft threads into crank arm and rotates smoothly on one larger, stainless 6302 bearing.
Ceramic Hybrid combines the chromium steel races found in Enduro's ABEC 5 range with Grade 5 ceramic (Silicon Nitride - Si3n4) balls found in Zero Ceramic bearings. This combination creates a lighter, more efficient and more affordable ceramic bearing, perfect for use in hubs or bottom brackets. The low contact LLB seals provide protection from water or dirt ingress, but without causing any friction or drag.Key Features: Bearing Code: 6903/29.5,Dimensions: 17mm x 29.5mm x 7mm,ABEC: 5,Grade: 5,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 13.31g.
Ceramic Hybrid combines the chromium steel races found in Enduro's ABEC 5 range with Grade 5 ceramic (Silicon Nitride - Si3n4) balls found in Zero Ceramic bearings. This combination creates a lighter, more efficient and more affordable ceramic bearing, perfect for use in hubs or bottom brackets. The low contact LLB seals provide protection from water or dirt ingress, but without causing any friction or drag.Key Features: Bearing Code: MR 18307,Dimensions: 18mm x 30mm x 7mm,ABEC: 5,Grade: 5,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 13.50g.
The ABEC3 3802 sets the benchmark for military grade, high precision bearings. MAX bearings are designed without retainers which enables them to carry a much higher load and makes them perfect for frame pivots. Thanks to its CRC Marine Grease, you won't have to worry about it washing out or breaking down when wet, making your frame bearings last even longer. Technologies: CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions. LLU Seals: Two NBR 70 rubber seals with medium/high contact seal, which rides in a matching groove machined into the bearing to make a labyrinth type seal. The outer sealing lip repels dirt and water while the inner sealing lip retains the grease.
Enduro Bearings ABEC3 3802 LLU Max BearingRaising the bar for military standard durability and strength, this ABEC 3 bearing is the perfect addition to your bikes frame pivots. Made without retainers, it is capable of bearing far higher loads while the internal CRC-marine grease ensures smooth, low-maintenance performance. Equipped with LLU medium/high contact rubber seals to stop water and dirt getting, this hard-working bearing is a vital component for a lifetime of use. Features: Dimensions: 15x24x7mm ABEC: 3 Grade: 10 Seals: LLU Grease: CRC-Marine Application: Frame Pivots Weight: 10.51g Buy Enduro Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.Key Features: Bearing Code: S68808, Dimensions: 40 x 53 x 7mm, Angular Contacts: 45 x 45 , ABEC: 3, Grade: 10, Grease: Kyodo Yushi PS-2, Application: Headsets, Weight: 24.00g.
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.Key Features: Bearing Code: ACB 3748, Dimensions: 37 x 48 x 6.5mm (36x45), ABEC: 3, Grade: 10, Seals: LLB, Grease: Kyodo Yushi PS-2, Application: Headsets, Weight: 25.25g.
Bearing puller for removing bearings that are pressed into a housing as found in all hubs and pivots.
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.Bearing Code: ACB 4545 1125,Dimensions: 30.5 x 41.8 x 8mm,Angular Contacts: 45x45,ABEC: 3,Grade: 10,Grease: Kyodo Yushi PS-2,Application: Headsets,Weight: 19.24g.
Enduro fork seals provide increased sealing with reduced drag and friction, and are the perfect upgrade for your fork. Durable Polyurethane dual-lip seals are super quiet and will last longer than any stock seals.Kit includes: 2x Oil Seals, 2x Wiper Seals, .
Like Ceramic Hybrid, Zero Ceramic use a combination of ceramic (Silicon Nitride - Si3n4) balls and steel races, except they are of higher Grade 3 quality. The races are also black oxide treated and ground toa mirror finish which prevents corrosion and provides near perfect efficiency and tolerances.Key Features: Bearing Code: MR 17287,Dimensions: 17 x 28 x 7mm,ABEC: 5,Grade: 3,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 13.00g.
The Enduro HyGlide hybrid seals combine the best of both worlds, oil retention and dirt/debris rejection. This design provides world-class performance in a long-lasting seal and delivers smooth action throughout the entire travel of the fork. This unique design joins the oil seal and wiper into a single unit, creating an ideal fork seal.The integrated top wiper is produced using a specific formulated polyurethane material, rather than a rubber compound that many fork seal manufacturers use. Our poly wiper/seal is a proper wiper keeping dirt and the elements out. In testing it is 300% more effective than a rubber wiper with garter spring used by many leading seal manufacturers. The co-molded oil seal below is made from Polyacrilate, the perfect material for the extreme operating temperatures and high pressures. The oil seal is also infused with MOS2 (Molybdenum Disulphide), a dry lubricant similar to graphite. While this is is the optimal material for the oil seal, it is separate in its duties from the upper wiper and is the reason for combining materials in to one hybrid seal.This cold-fused design allows the elimination of 1 sealing lip and further decreases the friction or “stiction” as referred to regarding fork movement. Between the two sealing lips, we have designed a large cavity area to hold lubricant to again prevent contamination and easy movement of the reciprocating fork producing more active suspension.With superior sealing action and cleaner fork lowers, your fork service intervals can be increased we find by 2 or 3 times compared to what the OE recommends. The HyGlide integrated wiper and oil seal provide much easier installation. No more fussing with a very thin lower seal that is fragile and easily bent when trying to install.
Like Ceramic Hybrid, Zero Ceramic use a combination of ceramic (Silicon Nitride - Si3n4) balls and steel races, except they are of higher Grade 3 quality. The races are also black oxide treated and ground toa mirror finish which prevents corrosion and provides near perfect efficiency and tolerances.Key Features: Bearing Code: MR 18307,Dimensions: 18 x 30 x 7mm,ABEC: 5,Grade: 3,Seals: LLM,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 13.00g.
Like Ceramic Hybrid, Zero Ceramic use a combination of ceramic (Silicon Nitride - Si3n4) balls and steel races, except they are of higher Grade 3 quality. The races are also black oxide treated and ground toa mirror finish which prevents corrosion and provides near perfect efficiency and tolerances.Key Features: Bearing Code: 6902,Dimensions: 15mm x 28mm x 7mm,ABEC: 5,Grade: 3,Seals: VV,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 13.87g.
Ceramic Hybrid combines the chromium steel races found in Enduro's ABEC 5 range with Grade 5 ceramic (Silicon Nitride - Si3n4) balls found in Zero Ceramic bearings. This combination creates a lighter, more efficient and more affordable ceramic bearing, perfect for use in hubs or bottom brackets. The low contact LLB seals provide protection from water or dirt ingress, but without causing any friction or drag.Key Features: Bearing Code: MR 2437,Dimensions: 24mm x 37mm x 7mm,ABEC: 5,Grade: 5,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 18.86g.
Like Ceramic Hybrid, Zero Ceramic use a combination of ceramic (Silicon Nitride - Si3n4) balls and steel races, except they are of higher Grade 3 quality. The races are also black oxide treated and ground toa mirror finish which prevents corrosion and provides near perfect efficiency and tolerances.Key Features: Bearing Code: 6802,Dimensions: 15mm x 24mm x 5mm,ABEC: 5,Grade: 3,Seals: VV,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 6.38g.
Like Ceramic Hybrid, Zero Ceramic use a combination of ceramic (Silicon Nitride - Si3n4) balls and steel races, except they are of higher Grade 3 quality. The races are also black oxide treated and ground toa mirror finish which prevents corrosion and provides near perfect efficiency and tolerances.Key Features: Bearing Code: 6803,Dimensions: 17mm x 26mm x 5mm,ABEC: 5,Grade: 3,Seals: VV,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 6.85g.
Tool for removal and installation of Shimano crank fixing bolts.
Like Ceramic Hybrid, Zero Ceramic use a combination of ceramic (Silicon Nitride - Si3n4) balls and steel races, except they are of higher Grade 3 quality. The races are also black oxide treated and ground to a mirror finish which prevents corrosion and provides near perfect efficiency and tolerances.Key Features: Bearing Code: MR 2437, Dimensions: 24 x 37 x 7mm, ABEC: 5, Grade: 3, Seals: VV, Grease: Kyodo Yushi PS-2, Application: Hubs, Bottom Brackets, Weight: 18.86g.