Miche’s high performance 11 speed chain is made from Nickel-plated heat-treated steel . It is 11 speed specific for use with Miche/Shimano 11 speed cassettes. Designed and optimised for effortless shifting and efficient quiet drive with chamfered and punched plates reducing weight. Easy link removal for chain length adjustment. Pre lubricated with a friction reduction compound/grease and ready to go direct from box.The Miche 11 is a long life, reliable, high performance chain at a very competitive price.Specifications:Fitment: 1/2" - 3/32",Nickel-Plated Steel,Thickness: 5,50mm,Links: 116,Weight: 272g.
Introducing the Connex 11SB Black Edition Chain from Wippermann. The Black Edition is made of the highest quality steel. The ultra-black coating on the plates ensures optimal corrosion protection. The long-term wear resistance of pins is achieved through a unique XHB hardening. Its long service life and precise gear-changing properties make this chain invincible.Compatible with all 11-Speed drivetrainsDimension: 1/2" x 11/128"Pin length: 5.9 mmRoller width: 2.2 mmSprockets: 11Pin ejection pressure: > 1500 NPin hardening: XHBWeight (110 links): 275g114 links inc Connex Link
EcoProTeQ technology EPT from KMC protects chains against corrosion for twice as long as conventional rust protection and thus sets new standards. Each component of every chain link is treated separately with EPT. Key Features: Model: e11EPT - 1 / 2x11 / 128,Pin length: 5.65 mm,136 L - Weight: 274 g,Triple X-bridge design: makes shifting faster and easier,Anti-rust treated (EPT).
KMC X11 11 Speed Super Light ChainDesigned for smooth and precise shifting, the X11 11 Speed Super Light Chain from KMC has been created with Road and MTB (mountain bike) riders in mind. Incredibly durable, this chain is compatible with Shimano, Campagnolo and SRAM 11 speed derailleur systems.Features:Use: MTB, RoadSpeed: 11 speedSize: 1/2"x11/128"Pin Length: 5.6mmCompatibility: Shimano, Campagnolo and SRAM 11 speed derailleur systemsTop-PerformanceDouble X-DurabilityNon-DirectionalWeight: 242g (approx)Buy KMC Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Silca Secret Chain Blend Hot Melt Wax (500g)Ideal for getting the greatest and smoothest drivetrain performance from your bike's gear transmission, the Secret Chain Blend Hot Melt Wax from Silca is unmatched. This hot wax lube ensures you maximise your potential by reducing drivetrain friction significantly and ensures your bike is smooth and silent as you crank the power. Fast, Smooth and Silent Drivetrain PerformanceThis Secret Chain Blend brings all of the super speed and silence of Silca's Super Secret Chain Lube in a hot-melt wax-dipped chain. Secret Chain Blend also utilizes the world's fastest, most lubricious additive, nano-scale Tungsten Di-Sulfide. NanoPlatelet WS2 has less than 1/3 the dynamic coefficient of friction of PTFE and 1/4 that of Molybdenum Disulfide (MoS2). The best part of this product is the submergible pouch. Don't want to dedicate a crockpot to hot waxing your chain? Simply put the chain in the bag and immerse in hot water. Silca Secret High Performance Hot Wax BlendWhen Silca launched secret chain lube, they admitted that the starting point for this product was a hot wax recipe that they had used for years with pro teams that had won numerous world and Olympic medals. The idea behind Secret Chain Lube was to bring this technology to a lube that didn't require hot melting but turns out, many of Silca's customers were already big fans of hot waxing chains, and the requests flooded in for them to release the SILCA Secret Wax Blend.. so here it is. Highly Lubricating and Wear Resistant FormulaConsisting of highly refined laboratory-grade paraffin and a high concentration of 3 specific sizes of nano-scale Tungsten disulfide, Secret Chain Blend not only acts as a lubricant but actually acts to modify the surface of the chain, filling in all of the crevices of the metal with highly lubricious and wear-resistant tungsten disulfide particles. As a result, chains waxed with Secret Chain Blend and Secret Chain Lube will actually get faster over time and after repeated waxings. Secret Chain Blend is the only hot wax lubricant to have a specifically matched and compatible drip wax which can be used to 'top off' the wax as needed, extending the duration between hot wax applications, and guaranteeing the quietest running drivetrain possible. Using the combination of Secret Chain Blend and Secret Chain Lube can dramatically extend the chain and drivetrain component life (up to 10x). Features:Contents: 500gUltra-High-Performance Hot Wax Chain LubeDurable and Efficient LubricationThe chain should be very clean and dry before applyingBuy Silca Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Miche 11 Speed Bike ChainThis superb chain is specifically designed for use with your road or MTB 11 speed drivetrain to bring you effortless shifting. Additionally, this stunning model features nickel-plated, heat-treated steel construction for extra durability and reduced noise. Finally, it's pre-lubricated with friction reduction grease, so it's ready to go straight from the box.Features: Material: Nickel-plated Steel Thickness: 5.50mm Links: 116 Speed: 11 speed 1/2-3/32" Weight: 272gBuy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: 10 Speed,1/2x 11/128,Chromized hollow pins,Hollow plates,Teflon coated inner and outer plates,Titanium-Nitride finish,244 grams.
The Silca Secret Chain Blend brings the same super speed and silence of Silca’s Super Secret Chain Lube but in a hot-melt wax-dipped chain version.The Silca Secret Chain Lube is based off the same formula Silca CEO Josh Poertner has used for years with pro teams that have claimed victories at the highest level of cycling. The idea behind the lube was to bring the same hot melt wax advantage to a drip applied lubricant, however many Silca customers are already fans of hot waxing chains, and requested the lube in a hot melt version. So, the Silca Hot Melt Wax blend is the answer to their calls.Consisting of highly refined laboratory grade paraffin and a high concentration of three sizes of Tungsten disulfide the blend not only acts as a lubricant but changes the service of the chain. Filling any crevices of the metal with the highly lubricious and wear-resistant Tungsten disulfide, the Secret Chain Blend will get faster over time with repeated waxings.The wax creates an incredibly fast running, low-friction chain. The nano platelets of WS2 (Tungsten disulfide) has less than 1/3 the dynamic coefficient friction of PTFE and ¼ that of Molybdeum Disulfide (MoS2).The Silca Secret Chain Blend packaging makes hot waxing a chain simple, even if you are new to the process. Simply place the chain into the open pouch. Place the pouch into a pot of room temperature water and bring up to just below boiling point. You should see the wax begin to melt. There is a transparent panel in the side of the pouch so you can check the process. Using a hanging hook, bent spoke, or zip tie lift the chain carefully out of the pouch, leaving it to dry hanging up above the pouch to collect any excess wax.The wax formula has the added benefit of being environmentally friendly and will help extend the chain and drivetrain component lifetime by up to x10.Key Features: Hot melt wax formula for dipped chains,Lubricious nano-scale Tungsten disulfide,Environmentally friendly formula,500g / 17.6 oz pouch,Chain should be very clean before application,For year round maintenance and to extend time between waxings top up with Silca Super Secret Chain Lube.
The all-new SRAM RED chain was redeveloped from the ground up. The unique link shape allows the chain to be narrower and lighter while increasing strength and providing more space between the outer plates of the chain and the cogs on either side.Key Features:Flattop technology enables a narrower chain with quieter operation and increased strength and durability,Hard Chrome plated inner link plates and rollers for reduced wear and prolonged life,HollowPin construction for increased strength and efficiency,Requires new Flattop Powerlock Compat - Speed (CN):12s-Eagle,Chain length (links): 114 links, 12 Links,Color - Outer link: Silver,Color - Inner link: Silver,Chain connector: PowerLock D1,Inner link finish: Chrome Plated,Outer link finish: Nickel,Pin variant: Hollow PinPin treatment: Chrome Hardened.
SRAM'S Super Narrow 10-speed PowerChain features the PowerLock connecting link the only secure tool-less attachment device for a sub 6mm chain in todays market. Closing Link: PowerLockWeight: 257g (114 links)Rivet Type: HollowPinCompatibility: 10-SpeedSRAM PC-1091R series chains also feature HollowPin construction and outer plates with lighting holes for weight savings with no sacrifice of strength. Lightweight, smooth, precise-shifting. A true high-performance product. Compatibility extends to industry-standard 10-speed systems.
Miche Primato Advanced Track Chain RingThis stunning model is specifically designed for use with your Miche Primato Advanced Track chainset and to bring you smooth performance. Additionally, its 7075-T6 aluminium construction allows for efficient power transfer, so you can maintain the edge over your competitors.Features: Material: CNC-machined 7075 T6 Aluminium Speed: Single speed Compatibility: Miche Primato Advanced Track chainsets Use: Road BCD: 144mmBuy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM X-Sync Direct Mount Boost MTB Chain RingThis SRAM X-Sync DM Chainring is specifically designed for use on "plus" size mountain bikes with their wider "Boost" type rear hubs and helps to ensure you obtain the perfect chainline for optimum performance. It's equipped with SRAM'S X-SYNC technology, which engages with the chain much quicker than standard chainrings and provides reliable chain retention over all terrains and in all conditions.SRAM 1x has been made even better with the simplicity of the new SRAM X-SYNC Direct Mount chainring. Engineered in Germany, the new Direct Mount rings bring lighter weight and greater simplicity to XX1, X01 and X1-1400 cranksets. SRAM’s Direct Mount rings give riders the perfect opportunity for a serious upgrade.Features: Material: Fully CNC'd Aluminium Recommended Group: XX1 and X01. X1 compatible Weight: 66g (28T), 68g (30T), 71g (32T), 76g (34T)Technologies:X-SYNC: SRAM 1X chainrings provide the highest level of performance and durability. Their tall square teeth edges engage the chain earlier than traditional triangle shaped teeth and their sharp and narrow tooth profile, as well as their rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-Sync chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-Sync rings are an integral part of the SRAM 1X drivetrain.Boost: With revolutionary advancements in bicycle componentry, like SRAM's XX1, X01 and X1 drivetrains, mountain bike designers have been given almost limitless freedom to focus solely on the performance of the bike. Each advancement demands that the entire package works flawlessly. Aggressive Trail and Enduro riders have been increasingly enjoying the benefits of larger wheels, but many still view 27.5" and 29" wheels as a possible weak link. This is why SRAM has developed an open standard with Boost compatible components for SRAM drivetrain, hubs and RockShox forks.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.