Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Features:One piece alloy body pedals with moulded pins,Suitable for BMX or MTB bicycles,Steel axle,Loose bearings,107x112x24mm,540g per pair,9/16 inch thread.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Modern low profile alloy bodied mountain bike pedal. The Features of the MKS MT E Cage Pedals are:Strong performance at an affordable price.
New for 2022Features:Alloy body and resin cage pedals with rubber top for grip,Ideal for folding bikes,Folding mechanism,Loose bearings,112x74x36mm,576g per pair,9/16 inch thread,
This tough, retro style wide platform pedal will keep you sure footed thanks to its serrated cage that will really grip your footwear.
crankbrothers Premium SPD Cleat PairMade from a very durable brass material, this pair Premium SPD Cleats are compatible with all crankbrothers clipless mountain bike (MTB) pedals. Easy to connect and disconnect from the pedals, they offer 6° of float to allow your knee to pivot naturally - a very useful feature as you’re shifting your balance on the trails.Features: Material: Premium strength brass Float: 6° Release Angle: 15° Compatibility: Eggbeater, Candy, Smarty, Acid and Mallet Shoe Compatibility: Mountain Bike (MTB) SPD type Bolt Pattern: 2-hole Adjustment: 2.2mm left/right Bolt Length: 9.5mm and 12mm bolts included Shims Included: Yes Sold as a pair (two cleats in pack) Weight: 30g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This popular pedal is sure to be a big hit with mountain bikers seeking a lightweight, tough bear trap style pedal suitable for use with toe clips. The Features of the MKS MT Lux Comp Alloy Cage Pedals are:Fully serviceable, this version uses a revised cage design for increased grip. Includes a lightweight alloy body and super smooth bearings.
Step Right Up Designed with future shredders and novice riders in mind, the Ride pedal sports a durable nylon composite body with 18 molded traction studs to provide solid footing while being kinder and gentler on your shins should you slip up.
Wellgo C002 Flat and SPD Commuter PedalsBuilt to keep you pedalling with precision on your ride to work or on weekend tours, these urban-centric pedals give the support and smoothness you need for regular town riding. Comprising of an aluminium body and cage and a CrMo spindle, a sturdy performance is assured when riding with or without cleats. Lightweight and reliable, these Wellgo pedals are a great addition to your commuter bike. Features: Body Material: Aluminium Cage Material: Aluminium Spindle Materials: CrMo Bearings: DU/Sealed bearings Size: 102x65x30mm Weight: 395g (pair)Buy Wellgo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.