CATEYE ISC-12 BLUETOOTH SPEED & CADENCE SENSOR
Key Features:Material: special tool steel, hardened and tempered,Ergonomic heavy duty double component handle,It is composed of wrench, product no. 1671.1, screw with nut and handle.,The double threaded screw enables you to use this tool for Shimano standard bottom brackets as well as for Shimano Octalink and Truvativ bottom brackets..How to use the tool:This tools allows you to thread the wrench into the axle with the additional screw. This prevents the wrench from slipping and damaging the bottom bracket nut. Work is made easy by the 350 mm long handle with the two part ergonomic sleeve. The same procedure can be used for installation. The screw is 24 mm AF and is used with a 24 mm wrench or with a torque wrench. The handle can be taken down if necessary..
This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
The SG-7.2 cutting guide is a specially shaped guide, designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deepThe guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameterTwo cutting slots are gived, one for standard saw blades and one for thicker, carbon specific bladesHardened steel body with moulded contact points to priotect tubes and frames.
Precision ground cutting jaws for a clean cut every time Cold forged and heat treated steel handles for massive strength Dual density moulded grips for comfort and control Built in crimper for cable end cap Forming hole for reforming housing ends and housing ferrules Quite simply the best cutters money can buy
Park Tool Axle & Spindle AV-5 Vice InsertThe ideal vice tool to have in your workshop, this Axle & Spindle Vice Insert helps add control to your workbench vice when carrying out repairs on your bike. Easy to Fit, Magnetic Vice Accessory Equipped with nine standard jaw openings for holding a range of spindle and axle sizes steady, this precision extruded aluminium insert connects to your vice via its magnetic Mini V-block design which provides a strong, non-slip bond and retainer legs for further stability. Also compatible with all Park Tool Freewheel Remover/Lockring Tools, the Axle & Spindle Vice Insert AV-5 is an essential repair tool for any workbench. Features: Material: Precision Extruded Aluminium Jaw Openings: Nine - 5, 9, 10, 12, 14, 20, 25, 30, and 36 mm (including one suitable for holding Hydraulic Tubing) Compatibility: Park Tool Freewheel Remover/Lockring Tool Attachment: Magnetic Mini V-BlockBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The IceToolz Precision Torque Wrench is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components. Applying the correct torque to your cycle components is essential for a safe and serviceable bike. This accurate torque wrench helps you ensure that the fittings on your bike are tightened to the correct torque and that clamping forces are distributed evenly across clamping surfaces.
Strong, corrosion-resistant and colour-coded for your convenience, these tools are a dependable addition to any workshop or home toolbox. Tool specialist Wera presents Bicycle Set 4, a compact 9-piece L-Keys set for bicycle maintenance and repairs. Supplied in a lightweight and robust folding pouch, this set is suitable for road bikes, mountain bikes (MTB) and electric bikes (E-Bikes). This set really stands out from your average set of Allen keys because it features Wera's Take it Easy colour coded tool size finder system, meaning it's quick to identify with L-Key you need for the job. The plastic sleeving on the L-Keys makes them comfortable to use, even in low temperatures. The Ball Head end of each L-Key makes it easy to use these Keys in hard-to-reach areas of your bike. These L-Keys also feature Wera's Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally, the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle. The L-Keys fit securely into the storage clip which is made of solid rubber, giving easy removal and no wear to the coloured plastic sleeves of the keys or size markings.
Key Features: The DF-1 Dummy Fork is an essential companion for any scenario that requires dropping the fork from a bicycle, enabling complete removal of the fork while keeping the handlebars, headset spacers, and brake caliper organized,The DF-1 installs into the headset and is held in place using the bike's stem,The brake holder features threaded and unthreaded holes for attaching disc brake calipers as well as most rim brake calipers, while the included pad spacer protects hydraulic disc brakes from accidental engagement,The DF-1 is nickel plated and powder coated for long life.
The Bluetooth Speed and Cadence Sensor easily installs onto all bike frames and helps provides incredibly accurate, real-time speed and cadence data. This data can be displayed, via Bluetooth connection, to your cycling computer, smartphone or smart watch.
Wolf Tooth's line of axles has just received two new additions, they now offer axles that are compatible with the Syntace X-12 System. The primary difference that distinguishes these axles from our other axles is the conical washer, where our other axles have a flat washer. Any bicycle brand that uses the Syntace X-12 System will also be able to use these new axles, which includes many models from Specialized, Cannondale, Intense, 3T, Canyon, and others.When developing the Rear Axle, Wolf Tooth engineers knew that they wouldn’t be able to get away with any old factory replacement part, even if it was made in Minnesota to aerospace standards. The Wolf Tooth Rear Axle uses a captive conical stainless steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it.These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. Compatibility: 12mm Rear Thru Axle for Syntace X-12 system,Axle length is compatible +/- 2mm,Axle length is independent of hub dimensions. Please use the axle measurement guide to find the axle length needed. Make sure to print it at 100% for accurate measurements. Tech Specs: Weight: 159 • 42g | 165 • 43g,Material: 7075-T6 aluminum, stainless steel conical washer,Diameter: 12mm,Thread Pitch: 1mm,Thread Length: 12mm,Tool Interface: 5mm and 6mm hex key,Torque Spec: 12 Nm max,Made in the USA.