Just because it s scaled down from a full-size ratchet doesn t mean it skimps on performance the Blackburn Big Switch Ratchet Tool takes the same simple necessities from the popular Switch and Big Switch and adds a convenient, ratcheting handle for even quicker, hassle-free adjustments. Extra-long 2.5 through 8mm Allen bits take care of business, along with T25 and T30 Torx, the renowned Wayside chain breaker, 0, 1, and 2 spoke wrenches, a disc-pad spreader, flathead, and a presta valve core tool. You re covered. Fully covered.T25, T30 Torx bitsExtra-long 2.5, 3, 4, 5, 6, 8mm Allen bitsFlathead screwdriverWayside chain breakerSize 0,1,2 spoke wrenchesDisc pad spreaderPresta valve core tool
The Park Tool FR8C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and removes four notch freewheels from flip-flop BMX hubs with 30 x 1mm threads.
Blackspire Snaggletooth XTR Narrow Wide ChainringIf you ride with Shimano XTR components, you’ll want slick and consistent operation and this Snaggletooth Narrow Wide Chainring will bring you exactly that. Created by Blackspire to be specific to XTR M9000 and M9020 mountain bike (MTB) cranksets, its narrow/wide teeth combine with modern “clutch” type rear derailleurs to keep your chain in place as you blast over the roughest sections of the trails. It’s also compatible with 1x9, 1x10, 1x11 and 1x12 speed systems and with its tough CNC Machined Aluminium construction, it’s ready for whatever the trail can throw at you.Features: Material: CNC Machined 7075 T-6 Aluminium Finish: Anodised Bolt Circle Diameter (BCD): 4x96mm (Shimano-specific asymmetric) Compatible: Shimano XTR M9000/M9020 cranksets only Speed: 1x9, 1x10, 1x11 and 1x12-speed drivetrains Narrow/Wide tooth design Features threaded tabs Uses the stock M7 screws for your convenience Built-in bosses correct chainline to 49mm Thickness: 7mmBuy Blackspire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The perfect workshop hammer!Fiberglass shaft with soft touch rubber gripA unique two-sided head with both steel and replaceable plastic striking surfaces: ideal to tackle any jobCovered by Park Tool's legendary limited lifetime warranty
The Park Tool LRT-3 is designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks.Fits chainring of Specialized, Cannondale and FSAFor lockrings with 47 48mm outside diameter and 4 or 8 notchesFits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torqueConstructed of 4140 heat treated steel and plated for long life
The Park Tool LRT-4 is designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900 and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminium for a perfect fit and to prevent marring expensive parts.Machined flat face for optimal lockring engagementFor lockrings with 41mm outside diameter and 16 notches36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque6061 aluminium construction
A complete take-along trail tool featuring I-Beam technology which is strong compact and lightweight Features a full complement of emergency tools: 1.5 2 2.5 3 4 5 6 8mm hex wrenches T25 star shaped wrench flat blade screwdriver tyre lever with two integral spoke wrenches and a 10-speed compatible chain tool. A portable trail side multi-tool designed to get you out of trouble and back on the bike. Covered by Park Tool's legendary limited lifetime warranty
Workshop hacksaw with all aluminium die cast frame constructionFeatures blade tension adjuster and comfortable handle to make this the perfect hacksaw for the professional workshop or home mechanicAccepts any 12 inch (300 mm) hacksaw bladeTool supplied with one blade
Wolf Tooth Remote Light Action Replacement Lever, Black.
Any dropper post with a 25mm or 26mm stanchion diameter - when in doubt, measure your stanchion.,Note that discrete position droppers will likely lose the lowest position because the valais 25 reduces the dropper travel by 25mm,Valais 25.25 (posts that have a confirmed 25mm diameter)Easton haven,Giant contact (internal routing),Raceface turbine,Rockshox reverb stealth,Specialized command post,9point8 fall line,Other 24.75-25.25mm (cable routing dependent),.,· valais 25.26 (posts that have a confirmed 26mm diameter)Thomson covert,Fox transfer,Other 26-26.5mm (cable routing dependent),.,Valais limits the dropper travel by at least 25mm. There are 2 models as noted in the compatibility section, one for the 25mm diameter stanchions and one for the 26mm stanchions.,At full compression, the valais' deep skirt contacts the seal collar first and will not contact the seal lip (protecting delicate seals from damage).Installation:,Remove the screw and slide valais over the seatpost stanchion,Put the valais at the highest position, install the screw and tighten to 2-3 nm,Install your saddle bag with it as full as it will be on the trail.,Let all the air out of your frame shock, drop the post, and compress the bike suspension all the way.,Assure there is adequate tyre to saddlebag clearance. If there is not tyre clearance, raise the dropper, and lower the valais until there is adequate tyre to saddlebag clearance.,Re-inflate your shock and be sure that the valais is torqued to 2-3 nm.
We designed these bolts to be the best on the market. These single chainring optimized bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut so no spanner is needed. These are 6 mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs.Compatibility:Any Wolf Tooth bolt-on Drop-Stop® chainrings with through holes,Works with other brands single chainrings as well,.Complementing products:Wolf Tooth Drop-Stop chainrings,GCX and GC cassette expanders,.Tech Specs:Designed and manufactured in Minneapolis, MN USA,7-8 NM tightening torque with light grease on threads only,Material: 7075-T6 aluminum,Size: M8 x.75 x 5,Weight: 4 bolts - 8 grams.
The Wolf Tooth Precision Headset Spacers Are Handcrafted In The USA From Premium-grade Anodised Aluminium. If You're Looking To Add Some Extra Vibrancy To Your Ride, Look No Further. This 5 Pack Comprises Of 5 Identical Spacers Of The Colour And Size Of Your Choice.Including Nifty Measurement Details On The Top Edges For Ease Of Set Up And Perfectly Paired With Wolf Tooth Precision Headsets, These Are A Must-have.Key Features:Handcrafted By Wolf Tooth In Minneapolis, USA,1 1/8" Top (Straight 1 1/8" Or 1 1/2" To 1 1/8" Taper) Steerer Tubes Only,6061-t6 Aluminium,Options: 3mm, 5mm, 10mm, 15mm, 20mm, 25mm, 30mm,5 X Identical Spacers Of Size And Colour Of Your Choice,Weight: 3mm - 2g , 5mm - 3g, 10mm - 5g, 15mm - 7g, 20mm - 9g, 25mm - 11g, 30mm - 13g.