The Urban is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac, Velcro lock-through panel. The cover can be tweaked to suit any seat and handle bar height. The URBAN design also features unique Velcro lock-through panels, so your lock can be pushed through to secure the cover to your bike. This also keeps the cover down low rather than riding above the lock. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack, and the URBAN Stuff Sac also easily attaches to your bike frame. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
The Stash is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac. Each BikeParka has an elasticated bottom for close fit around the wheels and eyelets for ties or small locks. The cover can be tweaked to suit any seat and handle bar height. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
A super-sized cover for mountain bikes and those with wider handlebars or child seats. Same Ripstop fabric, same tough protection against the cold and wet.
The Waterproof Double Bike Cover from LifeLine features a highly waterproof fabric construction with reflective graphics for protection from the elements for two bikes. Plus, it has an elasticated and buckle closure, and it's designed with bike lock holes at the front for a convenient access point to secure your bikes.
The Waterproof Single Bike Cover from LifeLine features a highly waterproof fabric construction with reflective graphics for protection from the elements for one bike. Plus, it has an elasticated and buckle closure, and it's designed with bike lock holes at the front for a convenient access point to secure your bike.
This versatile bike cover is specifically designed to help protect your bike from damage while stored at home, in the back of the van or during uplifting. Nukeproof recognises that many riders have all suffered annoying damage when storing their bikes side by side, or when your riding buddies throw their bikes in a van or uplift beside yours. As a result, this universal bike cover was developed to offer reliable protection for road bikes as well as mountain bikes of all disciplines including 26/27.5/29" frames. Versatile Bike Cover with Foam Padding Produced from a durable PU protected 600D polyester, this cover is hard-wearing to ensure that your bike is protected. The cover is foam padded on the inside to cushion your bike when stored side by side and to absorb knocks. Another highlight is its four Velcro adjustable straps and its buckle that's located underneath, which also make sure the cover is a snug and secure fit around your bike. This cover will also help keep your vehicle clean post-ride if there are no local bike washing facilities. Easy Clean Interior Whether you're into road cycling or mountain bike (MTB) trail riding, this cover comes complete with a wipe-clean surface on the inside. This makes it easy to clean off any dirt or oil, while also providing water resistance.
Heavy duty Nylon bicycle cover, will protect your bicycle from the elements
Protect your bike from the elements. Quickly folds to a compact size.Material : 190T Nylon.For 26" Wheel MTB /700c Trekking : Size (L x W x H) : 178 x 63 x 100 cm / 70.0” x 24.8” x 39.4”,Weight : 300 g / 10.56 oz.For 27.5" / 29" Wheel MTB - Specifically designed to fit 29er mountain bikesSize (L x W x H) : 196 x 63 x 105 cm / 77.2” x 24.8” x 41.3”,Weight : 330 g / 11.62 oz.For 700c Road : Size (L x W x H) : 170 x 50 x 100 cm / 66.9” x 19.7” x 39.4”,Weight 300 g / 10.56 oz.Warning :Topeak Bike Covers are designed to be used for storage protection only. The Bike Covers should never be used for transportation of bikes on car racks, mass transit racks, or for airline travel.
PVC Bike cover, light weight and ideal for protecting your bike from the elemets
This cargo bike cover is suitable for 2-wheel cargo bike. The cargo bike cover is water repellent, whereas the luxury cargo bike is made out of water resistant material.Key Features:Watertight and breathable material with taped seams,Easy to store thanks to the soft material,Handy closures for stretching the cover tight,Suitable for cargo bike model:,Batavus Fier 2,Winora F.U.B 2,Raleigh Stride 2..
The cargo bike cover protects the whole bike and is water repellent.Features:Watertight and breathable material with taped seams,Easy to store thanks to the soft material,Handy closures for stretching the cover tight.Compatible with Stride 3