Keep your bike protected from the elements with a Topeak bike cover. The cover easily fits the bike and secures with an elastic strap bottom closure. The bag is UV proof so it keeps water and rust away and when the bag is not in use it quickly folds into a easy to carry pouch.
Keep your bike protected from the elements with a Topeak bike cover. The cover easily fits the bike and secures with an elastic strap bottom closure. The bag is UV proof so it keeps water and rust away and when the bag is not in use it quickly folds into a easy to carry pouch.
The Urban is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac, Velcro lock-through panel. The cover can be tweaked to suit any seat and handle bar height. The URBAN design also features unique Velcro lock-through panels, so your lock can be pushed through to secure the cover to your bike. This also keeps the cover down low rather than riding above the lock. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack, and the URBAN Stuff Sac also easily attaches to your bike frame. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
The Stash is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac. Each BikeParka has an elasticated bottom for close fit around the wheels and eyelets for ties or small locks. The cover can be tweaked to suit any seat and handle bar height. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
A super-sized cover for mountain bikes and those with wider handlebars or child seats. Same Ripstop fabric, same tough protection against the cold and wet.
The Waterproof Double Bike Cover from LifeLine features a highly waterproof fabric construction with reflective graphics for protection from the elements for two bikes. Plus, it has an elasticated and buckle closure, and it's designed with bike lock holes at the front for a convenient access point to secure your bikes.
The Waterproof Single Bike Cover from LifeLine features a highly waterproof fabric construction with reflective graphics for protection from the elements for one bike. Plus, it has an elasticated and buckle closure, and it's designed with bike lock holes at the front for a convenient access point to secure your bike.
This versatile bike cover is specifically designed to help protect your bike from damage while stored at home, in the back of the van or during uplifting. Nukeproof recognises that many riders have all suffered annoying damage when storing their bikes side by side, or when your riding buddies throw their bikes in a van or uplift beside yours. As a result, this universal bike cover was developed to offer reliable protection for road bikes as well as mountain bikes of all disciplines including 26/27.5/29" frames. Versatile Bike Cover with Foam Padding Produced from a durable PU protected 600D polyester, this cover is hard-wearing to ensure that your bike is protected. The cover is foam padded on the inside to cushion your bike when stored side by side and to absorb knocks. Another highlight is its four Velcro adjustable straps and its buckle that's located underneath, which also make sure the cover is a snug and secure fit around your bike. This cover will also help keep your vehicle clean post-ride if there are no local bike washing facilities. Easy Clean Interior Whether you're into road cycling or mountain bike (MTB) trail riding, this cover comes complete with a wipe-clean surface on the inside. This makes it easy to clean off any dirt or oil, while also providing water resistance.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.