If you love the challenges and adrenalin rush of dirt jumps and urban riding, the Youth Flight Helmet will inspire you to push your limits further, higher and faster. However, should a landing come up short or confidence exceeds current skill, the impact-absorbing EPS foam liner provides protection from strikes to your head. A tough ABS outer shell also contributes to the protection on offer, providing extra structural strength while also providing extra durability and protecting against the more minor bumps and knocks you'll get from regular riding. What is MIPS? The helmet also features an extra level of head protection via the MIPS system. The Multi-directional Impact Protection System (MIPS) is a proven system that reduces the rotational forces on the brain when you're involved in a crash. The forces are absorbed and redirected to prevent them from being transmitted to the brain. MIPS is a Brain Protection System Rotational motion can cause brain injuries The low friction layer allows a sliding movement of 10–15 mm, in all directions, reducing rotational motion to the brain during impact Shop All MIPS Helmets Click Here Get Comfortable While the main focus is to keep your head safe, Fox have also ensured you'll enjoy a comfortable ride when wearing the Flight Pro. The updated interior design now sits lower on your head, giving a more secure and stable fit. The standard buckle system also provides a well-proven safe and secure fit while the comfort liner provides soft padded comfort for all your riding session
Mountain biking can be a pricey hobby to get into, but when it comes to keeping your head safer in the event of a tumble, you shouldn't have to compromise, even if you don't have the biggest budget. And this is where the Youth Mainframe Helmet (MIPS) comes into play. Packed with the latest head-protecting tech, it offers superb coverage at an accessible price. From smooth flowing singletrack to tough and technical trails, it's got you covered. Trail-Slaying Safety The construction is of Fox's in-moulded EPS design. This sees a shock-absorbing inner EPS foam covered by a tough polycarbonate outer. Should you crash, always a possibility when tackling technical trails and riding hard and fast, then the EPS foam soaks up and dissipates the damaging forces of a head impact. The tough outer is there to fend off those smaller knocks and bumps you might get when getting a bit too close to tree branches and trail-side overgrowth. Next comes the MIPS brain protection system, a brilliant bit of technology to feature at this entry-level price point. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Keep the Flow When you're on the bike and enjoying the ebb and flow of ever twisting and turning trails, the Mainframe ensures you don't overheat. With large vents and carefully optimised inner air channels, you'll always have fresh airflow over your head. So whether it's a stiff climb or fast downhill, you remain comfortable and fresh. Inside the Mainframe, the moisture-wicking padding does a great job of preventing you from being soaked in sweat as you pick up speed. And they're washable too, so you can always get that new-helmet feel back. The MIPS integrated fit is the final touch on this impressive MTB helmet. This gives a quick and easy way to get the fit just right. And a secure helmet is a safer helmet too. So twist the dial, get comfortable and go rip up some trails.
From the high-speed thrills of downhill mountain bike racing to soaring over kickers at the bike park or sprinting for the win at the BMX track, the Youth Rampage MTB Helmet gives you outstanding head protection, keeping you safer should you be unlucky enough to hit the dirt. Perfect Protection The safety-certified design gives you exceptional levels of protection and durability. With a combination of a shock-absorbing core and a tough injection-moulded ABS outer shell, the Rampage is more than ready for the demands of off-road riding. It's just what you need for all your downhill mountain biking fun, season after season. But not just that, the construction results in a weight of just 1180 grams and makes the cost to performance ratio exceptionally high too. Stay Cool. Stay Comfortable. The sleek Fox style encompasses airflow-boosting vents so you'll feel as cool as you look. Those same vents also have injected mesh to keep out dirt and debris kicked up from your tyres or from the rider in front as you speed down the trail with a smile on your face. The double D-ring closure keeps the Rampage nice and secure while the adjustable visor keeps the sun and roost out while allowing you to pull up goggles easily when you need to. While the Rampage Full Face is a less expensive version of the Carbon Pro, that doesn’t mean that you'll be cutting corners when it comes to safety on the trail. Pull it on. Go shred with confidence.
This Aerohead™ MIPS cycling helmet takes the same wind-cheating silhouette as the leading-edge Aerohead Ultimate but adds increased ventilation to keep triathletes and time trialists cool when the competition is hot. By using a polycarbonate shell, Wind Tunnel™ ventilation and internal channelling, this helmet is proven to boost cooling power while remaining aerodynamic. Additionally, Aerohead™ MIPS features a wrap-around eye shield that offers an impressive field of view with the convenience of a magnetic anchor attachment to allow easy storage of the lens in the “flipped up” position – Perfect for fast swim-to-bike transitions. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Lens by Zeiss® Optics shield with magnetic attachment the wrap-around eye shield offers an unblocked field of view with a huge aerodynamic benefit and the shield is made by ZEISS® Optics for unrivalled clarity. A magnetic anchor attachment keeps the shield secure, yet easy to remove, and it can be stored in the “flipped up” position. In-Mould Construction In-mould construction fuses a tough polycarbonate outer shell with the helmet’s impact-absorbing foam liner. The fusion process allows Giro to sculpt better ventilation systems, so In-mould helmets can be lighter and cooler than traditional helmets. Roc Loc® Air Fit System This revolutionary fit system improves helmet performance by enhancing cooling, as well as fit comfort and stability. Using a patented design that suspends the helmet just slightly off the top of the skull, Roc Loc® Air allows cool airflow to pass directly over your head, further enhancing the performance of vents and internal channelling that exhaust heat out of the helmet. Fit and feel adjustments mimic the Roc Loc® 5, allowing you to easily custom tune fit tension and fore-aft tilt of the helmet in seconds using a single hand. Super Fit™ Engineering Proprietary Super Fit™ sizing system is based on “human scale factors” data and over 25 years of handcrafting helmets. By creating helmet moulds in up to 4 adult sizes to match the human body’s form, Super Fit™ sizes comfortably and securely to fit riders and feel like they are custom made just for you.
Advanced Protection The Aether Helmet (MIPS) is designed with a host of features to provide you with the ultimate combination of protection, fit and ventilation. First, let's look at protection. The Aether is engineered with a dual-density EPS foam liner that makes it capable of absorbing a wide range of impact energies. Meanwhile, the 6-piece outer is reinforced with a shatter-resistant AURA reinforcing arch giving a boost to structural integrity in the event of an impact. Protection is then bolstered by Giro's proprietary MIPS Spherical technology - this design sees the MIPs technology deployed between the layers of EPS foam rather than immediately next to the head which enables Giro to maintain incredible cooling airflow and comfort. What is MIPS? The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Cool and Comfortable So that's the protection, now let's look at ventilation and fit. As mentioned, the unique MIPS design has allowed Giro to maintain excellent airflow inside the helmets. This is fully taken advantage of with 11 Wind Tunnel vents over the helmet, all leading to internal channelling that forces air across the scalp. With the extensive venting, you'll enjoy a cool head even in the warmest conditions. The large and airy vents are made possible thanks to the support of the AURA reinforcing arch, maintaining structural integrity while giving scope to increase vent size. Roc-Loc® 5 fit system Now let's turn to the fit and the Roc-Loc® 5 fit system. This is the industry benchmark in comfort, stability, adjustability and weight savings. In addition to enhancing the fit and comfort of helmets, Roc Loc® 5 allows you to easily custom tune the fit tension and the fore-aft tilt of the helmet in seconds using a single hand. And it’s lighter than comparable systems too, making it the ultimate in skull-hugging luxury.
Advanced Protection The Aether Helmet (MIPS) is designed with a host of features to provide you with the ultimate combination of protection, fit and ventilation. First, let's look at protection. The Aether is engineered with a dual-density EPS foam liner that makes it capable of absorbing a wide range of impact energies. Meanwhile, the 6-piece outer is reinforced with a shatter-resistant AURA reinforcing arch giving a boost to structural integrity in the event of an impact. Protection is then bolstered by Giro's proprietary MIPS Spherical technology - this design sees the Multi-Directional Impact Protection System deployed between the layers of EPS foam rather than immediately next to the head which enables Giro to maintain incredible cooling airflow and comfort while offering impeccable head protection. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Cool and Comfortable So that's the protection, now let's look at ventilation and fit. As mentioned, the unique MIPS design has allowed Giro to maintain excellent airflow inside the helmets. This is fully taken advantage of with 11 very large Wind Tunnel vents over the helmet, all leading to internal channelling that forces air across the scalp. With the extensive venting, you'll enjoy a cool head even in the warmest conditions and the heat of racing. The very large and airy vents are made possible thanks to the support of the AURA reinforcing arch, maintaining structural integrity while giving scope to increase vent size. Roc-Loc® 5 fit system Now let's turn to the fit and the Roc-Loc® 5 fit system. This is the industry benchmark in comfort, stability, adjustability and weight savings. In addition to enhancing the fit and comfort of helmets, Roc Loc® 5 allows you to easily custom tune the fit tension and the fore-aft tilt of the helmet in seconds using a single hand. And it’s lighter than comparable systems too, making it the ultimate in skull-hugging luxury.
The Agilis Cycle Helmet (MIPS) is all about maximum ventilation, minimal bulk and optimal protection levels, and all the while offering outstanding value. A total of 32 vents, complete with internal channels, ensures airflow is turbo-charged over the head while the Coolfit padding keeps sweat in check and it won't itch thanks to the anti-microbial finish preventing bacterial build-up. The Roc Loc® 5 fit system gives you optimal control of the fit ensuring the helmet stays in place and is most effective should you be involved in a crash. In the event of a crash, the MIPS (Multi-directional Impact Protection System) offers greater protection from the rotational forces of impact. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Hardbody™ shell The Hardbody shell wraps from the outside of the helmet to the inside, giving a significant boost to durability compared to regular helmets. The in-mould construction sees a tough polycarbonate outer shell fused directly with the helmet’s impact-absorbing foam liner. This in-mould fusion process allows Giro to optimise ventilation without compromising protection, so in-mould helmets can be both lighter and cooler than traditional helmets. Roc-Loc® 5.5 MIPS fit system The industry benchmark in comfort, stability, adjustability and weight savings. In addition to enhancing the fit and comfort of Giro helmets, Roc Loc® 5 allows you to easily custom tune the fit tension and the fore-aft tilt of the helmet in seconds using a single hand. It integrates perfectly with the MIPS system and it’s lighter than comparable systems too, making it the ultimate in skull-hugging luxury.
The Agilis Cycle Helmet is all about maximum ventilation, minimal bulk and optimal protection levels and all the while offering outstanding value. A total of 32 vents, complete with internal channels, ensures airflow is turbo-charged over the head while the Coolfit padding keeps sweat in check and it won't itch thanks to the anti-microbial finish preventing bacterial build-up. The Roc Loc® 5 fit system gives you optimal control of the fit ensuring the helmet stays in place and is most effective should you unfortunately crash. Hardbody™ shell The Hardbody shell wraps from the outside of the helmet to the inside, giving a significant boost to durability compared to regular helmets. The in-mould construction sees a tough polycarbonate outer shell fused directly with the helmet’s impact-absorbing foam liner. This in-mould fusion process allows Giro to optimise ventilation without compromising protection, so in-mould helmets can be both lighter and cooler than traditional helmets. Roc-Loc® 5 fit system The industry benchmark in comfort, stability, adjustability and weight savings. In addition to enhancing the fit and comfort of Giro helmets, Roc Loc® 5 allows you to easily custom tune the fit tension and the fore-aft tilt of the helmet in seconds using a single hand. And it’s lighter than comparable systems too, making it the ultimate in skull-hugging luxury.
The successor to the class-leading Aether cycle helmet, the Aries Spherical Helmet (MIPS) is lighter, cooler and has a more compact form factor that gives a streamlined performance and sleek aesthetic. It's Giro's premium helmet designed to cover the heads of all cyclists. From World Tour riders to weekend gravel adventurers to chain-gang smashers, it's a helmet you'll love to wear. Spherical Technology powered by MIPS® (Multi-Directional Impact Protection System) The Aries Spherical Helmet (MIPS) exceeds stringent safety standards thanks to the combination of cutting-edge safety technology. It starts with Giro's ball and socket Spherical Technology™, powered by Mips®. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Progressive Layering™ The Aries also benefits from an in-mould construction and Progressive Layering™. A tough and durable outer shell covers a two-layer impact-absorbing core. With one layer dealing with high-speed impacts and the other with low-speed impacts, the Aries addresses both those low-speed tip-over spills and more adrenaline-pumping crashes that happen when the brakes are off. Cool. Fast. Fresh. With a total of 24 vents, the Ariel is one cool cycle helmet. The Wind Tunnel™ vents are optimised for boosting cool airflow and yet minimising aerodynamic disruption. The Aura Reinforcing Arch has allowed Giro engineers to create large vents, pushing airflow to sensational levels, while also boosting structural integrity. Inside, carefully designed channels create a rush of cool air across your head. Even with great airflow, you'll still generate sweat during particularly intense rides, training and racing. However, thanks to the DryCore™ brow pad and Ionic+ anti-microbial padding, moisture is quickly wicked away. With its permanent anti-microbial performance, you'll also enjoy the freshness and itch-free comfort whenever you ride. Roc Loc® 5+ Air Fit System For easy adjustment, you'll enjoy the benefits of the Roc Loc® 5+ Air Fit System. This provides an unmatched level of comfort, stability, adjustability, and minimal weight. You can easily dial-in both fit tension and adjust vertical position with a single hand. It's the ultimate in skull-hugging luxury.
When you're enjoying the ease of cycling from A to B, be it for work or pleasure, the Caden Helmet II (MIPS), offers all the well-renowned protection you'd expect of a Giro helmet but with a more urban-inspired design. This sleek design makes use of Giro's In-Mould technology to keep your head protected. An EPS foam liner absorbs impacts while a tough polycarbonate shell takes the knocks and bumps of daily life in its stride. A total of 12 vents also ensures you keep your cool on the way to your destination. We then come to MIPS. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Roc Loc City MIPS Fit System A well-fitting helmet is a safer helmet and getting the right fit is made quick and easy via the Roc Loc City MIPS system. This system creates a cradle for the head and adjustment is made via the rear twist dial. The result is perfect comfort and stability. Urban Ready Features Not only safe but practical too, the Caden has everything you need for city biking. A lock port allows you to easily secure your Caden to bike or bag. Reflective accents boost your profile as night descends and a universal front light attachment allows you to add a front light too. Lastly, a TPU cycling cap-style visor keeps the sun out of the eyes or raindrops off your face too.
It doesn't matter if it's a daily e-bike commute or a local trip to pick up some groceries or a family bike ride, when you're enjoying the ease of cycling from A to B, the Caden Helmet II LED (MIPS), offers all the well-renowned protection you'd expect of a Giro helmet but with a more urban-inspired design. This sleek design makes use of Giro's In-Mould technology to keep your head protected. An EPS foam liner absorbs impacts while a tough polycarbonate shell takes the knocks and bumps of daily life in its stride. A total of 12 vents also ensures you keep your cool on the way to your destination. We then come to MIPS. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Roc Loc City MIPS Fit System A well-fitting helmet is a safer helmet and getting the right fit is made quick and easy via the Roc Loc City MIPS system. This system creates a cradle for the head and adjustment is made via the rear twist dial. The result is perfect comfort and stability. Urban Ready Features Not only safe but practical too, the Caden II has everything you need for city biking. A lock port allows you to easily secure your Caden to bike or bag. Reflective accents boost your profile as night descends and a removable rear LED light and a universal front light attachment (front light not supplied) keeps you lit up on your journey. Lastly, a TPU cycling cap-style visor keeps the sun out of the eyes or raindrops off your face too.
The Cinder™ MIPS helmet provides all the features an avid road rider wants in a lightweight package. The design is inspired by the classic aesthetic of Giro's premium Synthe™ helmet, offering a similar performance and style. Key features include the Roc Loc® 5 fit system, which allows you to easily dial-in both fit tension and adjust vertical position with a single hand. Air-FX padding offers comfort on your longest rides, and the helmet is equipped with MIPS to redirect impact energy, providing more protection in certain impacts. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Roc-Loc® 5 fit system The industry benchmark in comfort, stability, adjustability and weight savings. In addition to enhancing the fit and comfort of helmets, Roc Loc® 5 allows you to easily custom tune the fit tension and the fore-aft tilt of the helmet in seconds using a single hand. And it’s lighter than comparable systems too, making it the ultimate in skull-hugging luxury. In-Mould Construction In-mould construction fuses a tough polycarbonate outer shell with the helmet’s impact-absorbing foam liner. The fusion process allows Giro to sculpt better ventilation systems, so In-mould helmets can be lighter and cooler than traditional helmets. Thermoformed SL Roll Cage™ reinforcement Thermoformed SL Roll Cage™ reinforcement is a breakthrough in helmet architecture and allows greater ventilation without compromising the helmet's integrity.