From a daily commute to work to a gentle cycle ride with the family, Endura's Urban Luminite Helmet provides an excellent degree of head protection. Safety is also optimised thanks to the USB rechargeable LED rear light - this bright light has 3 settings so you always have visible rear illumination with you when cycling. With its one-handed micro-adjustment, it's simple to get a comfortable and secure fit, while the compact chin strap is easy to adjust via twin strap dividers. Lastly, the removable padding is both quick-wicking and anti-bacterial for long-lasting comfort.
Built tough, the Pisspot Helmet is ready for a day on the bike, whether your thrills come from street riding or found on the rough stuff. It's engineered with an in-mould construction, the protective inner foam core seamlessly covered by a tough and durable outer shell. The combination can take on the daily demands of biking and come out smiling while the foam core absorbs impacts should you end up hitting the dirt or tarmac. And then there's the excellent ventilation. With plenty of vents and inner air channels, you'll remain cool as you ride too. Quick-wicking, antibacterial padding inside also ensures sweat isn't going to be an issue. Lastly, a one-hand micro-adjustment fit system gets the fit perfect every time. Click, twist and go shred.
Koroyd® Core Protection Steep root filled chutes, big booters, whip-tastic tabletops and blisteringly fast berms, riding downhill has got thrills a minute but it can all go wrong very quickly which is where the MT500 Full Face Helmet comes in. When that front wheel washes out, you come up short or those roots bring you down to the ground with a resounding thud, the impact energy is quickly dissipated through the Koroyd® core and the shock to your head is lessened. Certified for downhill use, the MT500 will give you the confidence to continue pushing your limits as you progress with your riding. Engineered Comfort It's not just about a high degree of protection though, Endura have also ensured you'll enjoy comfort too. This starts with large air vents and an 'air intake' zone across the top of the helmet combined with large diameter Koroyd tubes to keep a cool flow of air circulating and an easy escape route for any sweat build up. Fast wicking padding also draws sweat away from the skin for greater comfort and it's anti-bacterial too, so say goodbye to that itchy-head you'll get with lesser helmets. With its one-handed micro-adjustment system it's also easy to get the ideal and rock solid fit. Coming in at under 700 grams but built burly enough for downhill racing, the MT500 Full Face Helmet will see you full of confidence for bike park days, enduro racing and the toughest of downhill trails.
Be it hitting target numbers during a training ride or scrapping for space in amongst the rush of a bike race sprint, the FS260-Pro Helmet II keeps you feeling safely protected during all your cycling adventures. However, should you be unfortunate to crash, the in-mould construction features an impact-absorbing foam core to protect against head injury. This protective core is fused to a durable polycarbonate outer shell. This adds structural strength while minimising weight and offers extra toughness for your regular riding. Easy Adjustment. Cool Airflow. The FS260-Pro isn't just protective, it's comfortable too. In order to get a secure and comfortable fit, Endura uses their micro-adjust cradle system. With a quick twist, you can get just the right fit for your head and ensure a stable fit in the event of a head impact. You'll also enjoy excellent airflow, with copious large vents leading to inner channels, directing cooling air smoothly over your head. A rush of cool air in. Damp, warm air pushed out. Working alongside this cool airflow are the soft-touch pads. As you pick up the pace and build up a sweat, these pads draw moisture off your head, preventing the sting of sweat in the eyes. They're removable too, letting you wash and freshen them up for long-term comfort.
Wherever you find yourself cycling, the Hummvee Plus MIPS Helmet makes sure you enjoy comfort on the bike and an extra level of head protection should you be unfortunate enough to hit your head. This head protection comes firstly via the in-mould construction. The heart of this engineered solution is a shock-absorbing foam core. In the event of head impact, this soaks up and dissipates forces that can otherwise cause a head injury. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here
Created for shredding trails hard, the SingleTrack Helmet is there to keep your head protected when you step over your MTB limits and go crashing down. The in-mould construction sees a shock-absorbing foam core fused to a durable polycarbonate outer. In combination, they give everyday durability, fending off knocks and bumps from trail overgrowth, as well as reliable protection against harder head impacts. Koroyd Technology Engineered Protection The SingleTrack also features Koroyd protection in high impact areas, offering improved head protection in the event of a crash. Thousands of co-polymer extruded tubes are thermally welded to create a consistent and fully engineered energy absorption system. These cores plastically deform for higher speed impacts, absorbing energy linearly. Up to 84% of the material thickness can be utilised in case of an accident. Existing energy absorbers densify around 60%. Cool and Comfortable While offering awesome protection in the event of a crash, the SingleTrack is supremely comfortable when you're not taking unexpected trips to the dirt. With its dial adjustment, you can always get the perfect fit. And of course, a good fit means a secure helmet to, just what you need if/when you crash. Inside, you'll also find quick-wicking and quick-drying pads. On sweat-inducing uphills and thrilling downhills, these pads ensure you're not soaked in sweat. Airflow is also optimised for cool comfort. Large vents, including an upper 'air intake' zone, keep fresh air circulating and allow damp air to escape. And if you wear goggles, then a rear gripper will keep your goggle strap firmly in place over any terrain.
All-Round Cycling Head Protection Wherever you find yourself cycling, the Hummvee Plus Helmet makes sure you enjoy comfort on the bike and an extra level of head protection should you be unfortunate enough to hit your head. This head protection comes first via the in-mould construction. The heart of this engineered protection solution is a shock-absorbing foam core. In the event of a head impact, this core soaks up and dissipates forces that could otherwise cause a head injury. To the outside of the in-mould system is a tough and durable shell. Fused to the inner core, this provides protection against knocks and bumps you may experience from regular riding, boosting durability. It also adds extra structural integrity should you fall. Easy Adjustment. Cool Comfort. In order to get a secure and comfortable fit, Endura deploy their micro-adjust cradle system. With a quick twist of the rear dial, you can get just the right fit for your head and ensure a stable fit in the event of a crash. Inside, soft-touch pads also add to your overall comfort levels. As pedal and build up a sweat, these pads draw moisture off your head, preventing the sting of sweat in the eyes. They're removable too, letting you wash and freshen them up for long-term comfort. Large air vents are made possible thanks to the strength of the in-mould design. These vents let cool air rush inside and draw warm damp air through and out of the rear exhaust vents. As you build up a sweat, this will endure you remain cool and comfortable during your ride.
Be it hitting target numbers during a training ride or scrapping for space in amongst the rush of a bike race sprint, the FS260-Pro MIPS Helmet II keeps you feeling safely protected during all your cycling adventures. However, should you be unfortunate to crash, the in-mould construction features an impact-absorbing foam core to protect against head injury. This protective core is fused to a durable polycarbonate outer shell. This adds structural strength while minimising weight and offers extra toughness for your regular riding. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Easy Adjustment. Cool Airflow. The FS260-Pro isn't just protective, it's comfortable too. In order to get a secure and comfortable fit, Endura uses their micro-adjust cradle system. With a quick twist, you can get just the right fit for your head and ensure a stable fit in the event of a head impact. You'll also enjoy excellent airflow, with copious large vents leading to inner channels, directing cooling air smoothly over your head. A rush of cool air in. Damp, warm air pushed out. Working alongside this cool airflow are the soft-touch pads. As you pick up the pace and build up a sweat, these pads draw moisture off your head, preventing the sting of sweat in the eyes. They're removable too, letting you wash and freshen them up for long-term comfort.
If you enjoy the adrenalin rush of fast flowing singletrack, the thrill of leaning hard into big berms and the anticipation of big kickers, the SingleTrack MIPS Helmet ensures you have confidence in your head protection should you hit the ground unexpectedly. In the event of a crash and head impact, a foam core soaks up and dissipates damaging forces that would otherwise cause injury. This protective core is fused to a burly outer shell, fending off the knocks and bumps from trail overgrowth, as well as adding durability for the knockabout life of a mountain bike lid. Koroyd Technology Engineered Protection The SingleTrack MIPS also features Koroyd protection in higher impact areas. this extra line of protection improves performance in the event of a crash. Thousands of co-polymer extruded tubes are thermally welded to create a consistent and fully engineered energy absorption system. These cores plastically deform for higher speed impacts, absorbing energy linearly. Up to 84% of the material thickness can be utilised in case of an accident. Existing energy absorbers densify around 60%. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Cool and Comfortable While offering awesome protection in the event of a crash, the SingleTrack MIPS is supremely comfortable when you're on the bike and staying upright. With its dial adjustment, you can always get the perfect fit. And of course, a good fit means a secure helmet to, just what you need if and when you crash. Inside, you'll also find quick-wicking and quick-drying pads. On sweat-inducing uphills and thrilling downhills, these pads ensure you're not soaked in sweat. Airflow is also optimised for cool comfort. Large vents, including an upper 'air intake' zone, keep fresh air circulating and allow damp air to escape. And if you wear goggles, then a rear gripper will keep your goggle strap firmly in place over any terrain.
Taking your head protection to the next level, the MT500 MIPS Helmet combines a host of features to make your mountain biking safer and give you the confidence to take on ever more challenging terrain. Starting with the in-mould construction, this combines a tough and durable outer with a shock-absorbing foam inner. This keeps your head protected when you push your limits a bit too far and hit the ground. Koroyd Technology Engineered Protection The MT500 also features Koroyd protection. Thousands of co-polymer extruded tubes are thermally welded to create a consistent and fully engineered energy absorption system. These cores plastically deform for higher speed impacts, absorbing energy linearly. Up to 84% of the material thickness can be utilised in case of an accident. Existing energy absorbers densify around 60%. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Cool and Comfortable As well as keeping your head safe, the MT500 is comfortable too. The adjustment system is quick and easy to use via a rear dial, ensuring you always get a good fit. After all, a good-fitting helmet is a safer more comfortable helmet. Inside, you'll also find quick-wicking and quick-drying pads. These make sure a tough pedal upwards won't leave your brow soaked in sweat. Airflow is also optimised for cool comfort. Large vents, including an upper 'air intake' zone, keep fresh air circulating and allow damp air to escape. Front vets also act as a sunglasses dock. And if you prefer wearing goggles, then a rear gripper will keep your goggle strap firmly in place over any terrain. An adjustable visor completes the awesome trail-ready package.
Take to the trails safe in the knowledge that should you get caught out by a lack of grip (or most often in our case, lack of skill), the Speedframe Pro MTB Helmet will keep your head safe and protected. At its heart is a Dual-density Varizorb EPS construction. This impact-absorbing foam is brilliant at soaking up crash forces from head impacts, spreading and dissipating them to protect your head. This works in tandem with the MIPS brain-protection system to keep you safe when it all goes a bit wrong. What is MIPS? The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Fast Flowing Features With safety taken care of, next comes fit and comfort for all your singletrack slaying. A customisable fit is taken care of with the 360 Degree Fit System. A quick and simple twist of the rear dial gives a comfortable fit every time you go mountain biking. A magnetic Fidlock® SNAP helmet buckle keeps the helmet secure and is super-easy to use even with gloves on. When you're up to speed, the extensive airflow vents and internal channels keep cool air flowing and prevents you from overheating. Sweat is inevitable when working hard, but the removable, washable XT2® liner is quick to wick away moisture for superb comfort. It's antimicrobial too, so keeps odours at bay and prevents any itching after a hot biking session.
The key to the Dropframe Pro MTB Helmet's confidence-inspiring level of protection is the combination of dual-density Varizorb EPS, MIPS (Multi-directional Impact Protection System) and M.O.RE. (Mandibular Occipital Reinforcement) Guard design. Together they give unrivalled all-over head protection while still allowing the wide field of view and smooth airflow of an open-face lid. Should you be unfortunate to crash, quite likely when MTBing, then the Varizorb EPS absorbs the impact forces and spreads those forces widely to lessen their effect on your head. At the same time, MIPS technology reduces the rotational forces acting on the head and thus guards against brain injury too. Lastly, the M.O.RE. design provides extended coverage of your ears, jaw, and back of the head so no matter which way you fall, you're fully covered. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Cool and Comfortable The Dropframe isn't just protective though, it's cool and comfortable too. Fox have given it 8 Big Bore vents and 7 exhaust vents, turbo-boost cooling airflow over your head. The fixed visor is also carefully designed to channel airflow through the helmet while also keeping the sun out of the eyes. Rowdy riding won't leave you overheating in this airy lid. With its removable moisture-wicking liner, complete with an antimicrobial finish, you're also assured of a fresh and odour-free trail ride, day after day, season after season.