Just like their adult helmets, this Youth Sidetrack II Cycle Helmet features the same tough and protective fusion In-Mould polycarbonate shell. Pioneered by Bell, this design sees the tough and durable outer bonded directly to the shock-absorbing EPS foam inner. This gives you a helmet that can take the knocks of daily mountain bike use and offers excellent protection in the event of a crash. Getting the right fit is essential for safety and here you'll get the easy to use and precise adjustment of the Ergo fit system. The dial system allows one-handed adjustment, even on the go. Complementing this are the No-twist tri-glides. These quick-adjust fasteners keep the straps flat and positioned perfectly. Less fuss. More mountain biking time. Comfort is also enhanced thanks to the Sweat Guide brow padding, this draws away moisture before it can cause discomfort or sting the eyes.
With its Fusion In-Mould Technology, pioneered by Bell, the Tracker Helmet gives you durable and highly protective performance for cycling. A durable outer shell provides a strong and sturdy construction, capable of taking the knocks and bumps of regular riding. This outer is bonded to an EPS foam liner, designed to soak up and dissipate the forces of head impacts during a crash. Once you're up to speed and building some body heat, the 25 air vents keep airflow rushing over your head and ensure you remain cool and comfortable. There's also a visor to keep the glare of the sun or raindrops out of the eyes. It's removable too if you prefer a more streamlined look. The No-Twist Tri-Glides™ make sure adjustment of the straps is easy and straps lay flat and in position over the roughest of surfaces. Ergo Fit™ System Giving easy adjustment with just one hand, the Ergo Fit™ makes it simple to dial in the fit of your Tracker, giving you all-day cycling comfort. Too tight or too loose, a quick twist of the rear dial sorts it. With a secure fit, you can be confident of excellent protection at all times.
The Trace MIPS Helmet is made with the same Fusion In-Mould technology as Bell's flagship models. Pioneered by Bell, this construction technique sees an EPS foam inner fused with a polycarbonate outer shell. In the unlikely event that you take a fall from your bike, the EPS foam liner provides shock-absorbing protection for your head. Meanwhile, the polycarbonate shell protects against minor bumps while boosting durability too. Bell have then deployed MIPS. MIPS (Multi-directional Impact Protection System) Made to meet and exceed international standards, Bell turn to Mips to add an extra layer of head protection to their Trace helmet. The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Stay Cool. Stay Comfortable. While head protection is the primary goal, Bell hasn't ignored comfort either. The streamlined, sculptured design features a total of sixteen air vents. This gives a cool rush of air over the head and allows sweat an easy escape route too. A fitted peak also keeps sun glare or rain out of your eyes. When you're generating a sweat, the Sweat Guide™ to the front pulls perspiration away from the brow pad and away from eyewear. The No-Twist Tri-Glides™ ensures easy adjustment and straps stay flat to keep your helmet nicely in place. Ergo Fit™ (integrated with MIPS) Giving you adjustment with just one hand, the Ergo Fit™ lets you dial in the fit so you always enjoy cycling comfort. With a secure fit, you can be confident of excellent protection at all times.
Made for your active lifestyle, the Crest Helmet is an entry-level cycle helmet that offers modern looks and modern head-protecting performance. Using Bell's In-Mould Polycarbonate Shell technology, the impact-absorbing shell is fused with a tough and durable outer. in combination the inner and outer offer protection against both minor bumps and more forceful impacts. Safety is of course the core aim of this helmet. But it's no good being safe if you find wearing the helmet uncomfortable. And so Bell have sculpted the Crest with 17 large air vents, delivering excellent airflow and keeping you feeling comfortable as you warm up from pedalling. A visor also helps shield you from sun glare or rain. You'll also find Bell's ErgoDial™ Fit System. With a simple twist of the rear dial, you can get the fit of your Crest helmet comfortable and secure. After all, a secure helmet is also a safer helmet.
While the Formula Road Cycling Helmet (MIPS) sits in the mid-range bracket, it's still packed with features to deliver uncompromised safety. Protection begins with Bell's pioneering Fusion in-mould technology. This sees a durable polycarbonate shell bonded directly to an EPS shock-absorbing core. This results in a tough cycle helmet that can meet the demands of daily use and provides protection from hard impacts should you, unfortunately, fall from your bike. You also get the benefit of MIPS (Multi-directional Impact Protection System). MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Comfortable Style The Formula has an elegant and aerodynamically efficient design while also featuring copious amounts of vents to keep cool air circulating. Inside, air channels ensure turbo-charged ventilation and the 'Sweat Guide' pad design pulls moisture off the skin and away from your eyewear. A comfortable and secure fit is made possible via the 'Float Fit' system. This lightweight system is integrated with the MIPS design and allows quick adjustment with a simple twist of the rubberised rear dial. For all-round performance and style, Bell has got the Formula just right.
Using the same in-mould engineered construction as their flagship models, the Avenue MIPS Helmet won't let you down should you bash your head. This system, pioneered by Bell, sees an impact-absorbing EPS foam fused to a durable outer shell. Should you be unfortunate to take a tumble, this system works to soak up damaging impact forces while maintaining excellent structural integrity. Bell have then deployed MIPS. MIPS (Multi-directional Impact Protection System) Made to meet and exceed international standards, Bell turn to MIPS to add an extra layer of head protection to their Avenue helmet. The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Stay Cool. Stay Comfortable. While head protection is the primary goal, Bell hasn't ignored comfort either. The streamlined, sculptured design features a total of eighteen air vents. This gives a cool rush of air over the head and allows sweat an easy escape route too. When you're generating a sweat, the Sweat Guide™ to the front pulls perspiration away from the brow pad and away from eyewear. The No-Twist Tri-Glides™ ensures easy adjustment and straps stay flat to keep your helmet nicely in place. Ergo Fit™ (integrated with MIPS) Giving you adjustment with just one hand, the Ergo Fit™ lets you dial in the fit so you always enjoy cycling comfort. With a secure fit, you can be confident of excellent protection at all times.
Using the same in-mould engineered construction as their flagship models, the Avenue Helmet won't let you down should you bash your head. This system, pioneered by Bell, sees an impact-absorbing EPS foam fused to a durable outer shell. Should you be unfortunate to take a tumble, this system works to soak up damaging impact forces while maintaining excellent structural integrity. Stay Cool. Stay Comfortable. While head protection is of course the primary goal, Bell didn't ignore comfort either. The streamlined, sculptured design features a total of eighteen air vents. This gives a cool rush of air over the head and allows sweat an easy escape route too. When you're generating a sweat, the Sweat Guide™ to the front pulls perspiration away from the brow pad and away from eyewear. The No-Twist Tri-Glides™ ensures easy adjustment and straps stay flat to keep your helmet nicely in place. Ergo Fit™ Giving you adjustment with just one hand, the Ergo Fit™ lets you dial in the fit so you always enjoy cycling comfort. With a secure fit, you can be confident of excellent protection at all times.
If you're bound for the trail centre, ripping up some XC loops or flowing along singletrack in your local woods, the Spark 2 Helmet (MIPS) has got you covered should you crash. It's the Fusion In-Mould Technology that provides reliable head protection. A durable outer shell provides a strong and sturdy construction, capable of taking the hard knocks of mountain biking. This is bonded to an EPS foam liner, designed to soak up and dissipate the forces of head impacts during a crash. This sturdy construction is backed up by MIPS, an innovative system that enhances protection from rotational forces in the event of a crash. MIPS (Multi-directional Impact Protection System) Made to meet and exceed international standards, Bell turn to MIPS to add an extra layer of head protection to their Spark 2 helmet. T The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Keep Cool While you're flying downhill and pedalling technical uphills you'll be sure to build up some body heat, but the combination of 13 large air vents and the 'Sweat Guide' pad design keeps air flowing over the head and sweat wicked away for greater comfort. The integrated visor completes the sleek mountain bike design and adds a block to both the sun's rays on a summer's pedal and raindrops on a muddy winter ride. Ergo Fit™ (integrated with MIPS) Giving you adjustment with just one hand, the Ergo Fit™ lets you dial in the fit so you always enjoy cycling comfort. Too tight or too loose, a quick twist sorts it. With a secure fit, you can be confident of excellent protection at all times.
Bell has taken their 4Forty and evolved the design to make it better than ever. A sleek shell sees improvements to venting and better goggle compatibility as well as a magnetic buckle to make fitment easy. What hasn't changed is the superb level of protection. In the event of a crash, the EPS foam core provides shock absorption, helping to prevent injury. This protective core is fused to a durable polycarbonate shell. In combination with the inner, this system offers reliable protection against minor dings from trailside overgrowth as well as more serious impacts. MIPS (Multi-directional Impact Protection System) Made to meet and exceed international standards, Bell also turn to MIPS to add an extra layer of head protection to their 4Forty Air. The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Feature-packed MTB Performance When you're in the flow of the trail or grinding it up a steep uphill, 14 large vents let air rush over your head so you don't overheat. However, when you do build up a sweat, the Sweat Guide™ system at the brow moves sweat away from the pads and prevents it from running into your eyes. Ionic+ Comfort Padding also fights the build-up of bacteria, preventing itching and maintaining freshness. A Fidlock Magnetic Buckle is a great upgrade, making it quick and easy to put on and pull off your helmet. Meanwhile, No-Twist Tri-Glides™ make sure adjustment straps are always in the right place and kept flat. Lastly, eyewear ports make space to stow sunglasses easily and for those of you who prefer goggles, integrated grippers keep your goggle straps securely in place. Float Fit™ Race (integrated with MIPS) This minimalist fit system ensures you can quickly and easily achieve the most comfortable fit of your helmet. The easy-to-turn dial features an over-moulded rubber grip so you can operate it easily, even on the fly. And it's light too - always a win for performance-focused mountain bikers.
The Bell Super 3 Helmet features Bell's new Float Fit system, with easy adjustability to fit your unique head shape. Keeping your head cool no matter what, Bell gives the Super 23 vents over the top whilst being backed up by X-Static® Padding, keeping away sweat and battling odour build up - you're not going to be the stinky one at the post-ride cafe stop. To capture you and your buddies’ best bits on the trail the helmet even features an Integrated Breakaway Camera Mount - fails or trail stars caught on action cam every time. If you want a versatile MTB helmet that can handle the demands of all-mountain riding, the Bell Super 3 helmet could be exactly what you're looking for.
The 4Forty MTB Helmet features a full hard-shell, the helmet's outer shell is bonded to the EPS foam liner, creating a tough and burly lid that can take the hard knocks of a life lived off-road. It also features generous ventilation with 15 vents keeping your head cool as you take on tough trails and the Sweat Guide design also pulls moisture away from the brow and eyewear, leaving you comfortable even on the warmest of trail days. If you do come off the bike you want your helmet to stay in place and to this end, the 4Forty features Bell's Float Fit system lets you dial in the fit perfectly via the rear dial. This is then complemented by the No-Twist Tri-Glides, keeping the helmet straps flat and properly adjusted. Lastly, the adjustable visor accommodates both glasses and goggles, perfect for trail days and enduros. Boasting the comfort, protection and broadly capable features of helmets costing twice as much, the 4Forty is a bantamweight, all-conditions, all-kinds-of-trail champion packing a heavyweight value.
Thanks to Fusion In-Mould Technology, the Nomad 2 Helmet provides reliable head protection that meets the demands of regular trail riding. A durable outer shell provides a strong and sturdy construction, capable of taking the hard knocks of mountain biking. This outer is bonded to an EPS foam liner, designed to soak up and dissipate the forces of head impacts during a crash. As you pedal up and swoop back down, 15 large air vents keep you feeling cool and comfortable. There's also a visor to keep the glare of the sun or raindrops out of the eyes. The No-Twist Tri-Glides™ make sure adjustment is easy and helmet straps lay flat and in position over the roughest of terrain. Ergo Fit™ System Giving easy adjustment with just one hand, the Ergo Fit™ makes it simple to dial in the fit of your Nomad 2, giving you all-day cycling comfort. Too tight or too loose, a quick twist of the rear dial sorts it. With a secure fit, you can be confident of excellent protection at all times.