Knog Plus Bike Light SetStay visible when cycling in low light or after dark with this illuminating Plus Bike Light Set from Knog. Ideal for commuting, the front light boasts a 40-lumen output and the rear light has a dazzling 20-lumen output. RechargeableKnog’s Plus Twinpack is extremely convenient with both lights being USB rechargeable saving you the constant effort of having to find and replace your light’s batteries. Instead, the lights can quickly and easily be recharged via any standard USB port and both have up to 40 hours of battery life.MountingThe lights each come with various mounting options including two types of interchangeable straps for bars and seatposts 22-27mm and 28-32mm+. Additionally, each light comes with a magnetic mount which lets you clip the lights to your clothing, rucksack, panniers, etc.Light ModesBoth lights, included in the twinpack, come with 5 different light modes which can easily be toggled between using the long-push button. The light modes included are:Steady: 2 hoursStrobe: 8.5 hoursPulse: 4.5 hoursFancy Flash: 10 hoursEco Flash: 40 hoursFeatures:Lumens: Front Light: 40-lumens; Rear Light: 20-lumensLight Modes: 5Mounting System: Includes magnetic mounting systemHandlebar/Seatpost Measurements: 22.2 – 31.8mmRechargable: USB rechargeableCharger Included: No charging cable required, Plus plugs directly into USB portsCharge Time: 4 hoursWater Resistant: YesVisibility Length: 500mWearable designDimensions: Front Light: 14 x 66 x 18mm; Rear Light: 14 x 66 x 18mmWeight: Front Light: 12g; Rear Light: 12gBuy Knog Lights from Chain Reaction Cycles, the World's Largest Online Bike Store.
Knog Plus Bike Light SetStay visible when cycling in low light or after dark with this illuminating Plus Bike Light Set from Knog. Ideal for commuting, the front light boasts a 40-lumen output and the rear light has a dazzling 20-lumen output. RechargeableKnog’s Plus Twinpack is extremely convenient with both lights being USB rechargeable saving you the constant effort of having to find and replace your light’s batteries. Instead, the lights can quickly and easily be recharged via any standard USB port and both have up to 40 hours of battery life.MountingThe lights each come with various mounting options including two types of interchangeable straps for bars and seatposts 22-27mm and 28-32mm+. Additionally, each light comes with a magnetic mount which lets you clip the lights to your clothing, rucksack, panniers, etc.Light ModesBoth lights, included in the twinpack, come with 5 different light modes which can easily be toggled between using the long-push button. The light modes included are:Steady: 2 hoursStrobe: 8.5 hoursPulse: 4.5 hoursFancy Flash: 10 hoursEco Flash: 40 hoursFeatures:Lumens: Front Light: 40-lumens; Rear Light: 20-lumensLight Modes: 5Mounting System: Includes magnetic mounting systemHandlebar/Seatpost Measurements: 22.2 – 31.8mmRechargable: USB rechargeableCharger Included: No charging cable required, Plus plugs directly into USB portsCharge Time: 4 hoursWater Resistant: YesVisibility Length: 500mWearable designDimensions: Front Light: 14 x 66 x 18mm; Rear Light: 14 x 66 x 18mmWeight: Front Light: 12g; Rear Light: 12gBuy Knog Lights from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mounting Knog’s Plus Front and Rear Light come with magnetic mounting systems that allow you to take the lights on and off your seatpost and handlebars in seconds. This is especially useful for commuters who are constantly getting on and off their bikes. Included with the light are all the parts you need to install the mount on to a variety of bike frames: 2 x interchangeable straps for posts 22-27mm/28-32mm+ and magnetic mount attachment. Rechargeable For quick and easy charging on the go the lights come with an integrated USB plug that allows you to recharge the light from any standard USB port. This means you don’t have to constantly swap out batteries or remember to carry round a charging cable. Light Modes The lights both come with five different light modes that can easily be switched between using the oversized, long power button that is easy to use even when you’re wearing gloves. The lights come with five different light modes that allow you to find the perfect light mode to suit your battery life or current lighting environment. The modes included are: Mode One: Steady – 2 hours battery life Mode Two: Strobe – 8.5 hours batter life Mode Three: Pulse – 4.5 hours battery life Mode Four: Fancy Flash – 10 hours battery life Mode Five: Eco Flash – 40 hours battery life
PWR Mountain Kit has everything you need to keep you well lit for trail and mountain biking. It contains the 2000 lumen PWR Mountain Bike Extension Mount and Helmet Mount. Not only is PWR Mountain a high power headlight but simply take the product apart and you have much more. A lighthead for other PWR bike and camping lights plus a PWR Bank to charge devices that is also the battery for all products in the PWR range. Use the PWR Bar-To-Frame Mount to hitch a lighthead to your handlebar with the Tri-prong Side Mount (GoPro compatible) and the battery to your frame with the Frame Mount. Use th PWR Brakeboss Extension Mount to attach your Lighthead to the front frame of your bike or the Helmet Mount to attach the light to compatible helmets. The PWR Mountain uses a circular beam for flood lighting obstacles from unpredictable angles incorporates twist mode operation (turn the light on and off twisting the lighthead - no buttons) and gives you the option to program your brightness and runtime through our ModeMaker app. KIT CONTAINS Large PWR bank (10000 mAh). 2000 Lumen PWR Mountain lighthead. Brakeboss Bike extension mount. Helmet mount. Side mount. Frame mount. Tri-prong side mount (GoPro compatible). Large mount. RUNTIME MODE LUMENS RUNTIME Max 2000 2hrs Mid 500 9hrs Stamina 200 30hrs Pulse 1000 20hrs Strobe Flash 250 35hrs Eco-Flash 150 200hrs FEATURES PWR is an ecosystem of bike and outdoor products designed to share their battery. But that battery also works as a power bank to charge your devices. PWR Mountain runs for 2 hours at 2000 lumens or up to 200 hours in Eco-flash mode. Elliptical beam - Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Programs your modes - The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light then select and tailor modes from the menu. You can do things such as control brightness adjust runtimes and add new light modes. Functionality - Twisthead operation to turn light on / off and to scroll through light modes (no buttons). Charge your devices - Rear of the light is a USB rechargeable power bank. Use this to charge your phone GoPro or cycle computer on the go. 1 hour riding @2000 lumens means you can almost fully charge your iPhone twice. Charge time 7 hours. SPECIFICATION Light output: 2000 Lumens. Power Bank: 10000 mAh. Dimensions: 129.5 x 48mm ∅. Weight: 335g. Battery indicator. Charges your devices. CNC Machined. Programmable modes. Interchangeable lightheads. Twist operation. USB rechargable. Water resistant when cap is on. INSTRUCTIONS Connect lighthead to PWR bank: Insert the two lighthead plug pins into the battery. When connected your lightheads LED's will flash. Connect lighthead to sidemount: Slide the mount into the slot on the side of the battery. Then tighten the thumbwheel. To remove the mount you will need to loosen the thumbwheel. Operation: Once the lighthead and battery are connected twist the lighthead and hold to turn on twist and release to change modes.
PWR Commuter is a 450 lumen LED bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app) then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader brighter road coverage; is USB rechargeable and has 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. RUNTIME MODE LUMENS RUNTIME Ride 450 40mins Commuter 190 2.5hrs Stamina 50 7hrs Pulse 320 2.5hrs Strobe Flash 190 3.5hrs Eco-Flash 50 35hrs FEATURES The two Charger lights come with 5 pre-programmed modes just in case you haven't yet discovered the ModeMaker app. The optimum steady mode for the PWR Commuter is the aptly named Commute mode. It runs for 2 hours at 200 lumens but there is always the option to crank it up to the 450-lumen Ride mode. Elliptical beam - Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Programs your modes - The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light then select and tailor modes from the menu. You can do things such as control brightness adjust runtimes and add new light modes. Charge your devices - Rear of the light is a USB rechargeable power bank. Use this to charge your phone GoPro or cycle computer on the go. 1 hour riding @250 lumens means you can top up charge your iPhone by 10%. Charge time 3.5 hours. SPECIFICATION Light output: 450 Lumens. Power Bank: 850 mAh. Dimensions: 98 x 30mm ∅. Weight: 85g. Battery indicator. CNC Machined. Programmable modes. USB rechargable. Water resistant when cap is on. INSTRUCTIONS Fitting your new light to your bike: Place your light on the handle bar with knog logo on strap facing forward. There are two holes to choose from depending on your bar diameter. Using the button: To turn on press and hold on/off button until the light turns on. To turn off press and hold the button until the light switches off. To change modes once the light is on a short press of the button changes modes. Charging your lights: PWR Commuter and PWR Rider use a micro USB input to charge. Find this under the end cap. Press RED button to release cap.
The PWR Lighthead 1100L is part of Knog’s PWR Modular System and when combined with a small medium or large PWR Bank can make for a powerful front bike light head torch or flashlight. If you're looking at adding to your lighting solutions this can be a cost effective way of doing just that. The PWR Lighthead 1100L has an elliptical style beam with a horizontal and vertical spread for broader and brighter road or trail coverage. You can also program this lighthead to suit your needs using Knog’s Modemaker app – control brightness adjust runtimes and add new light modes. BROAD AND BRIGHT COVERAGE - The PWR Lighthead 1100L outputs an elliptical style beam for broader and brighter road coverage. This modular 1100 lumen lighthead can be swapped between small medium and large PWR Bank batteries for longer runtimes. PROGRAM YOUR LIGHT - When Knog designs each light we put optics at the heart of that equation. Whether it's new LED formations or beam patterns we are committed to making each lumen work harder once you're on the road. You can program the light to suit your needs with Modemaker – control brightness adjust runtimes and add new light modes. SPECIFICATION Dimensions - H: 45mm x W: 35mm x L:35mm. Weight - 54 grams. Lumens - 1100. Runtimes if lighthead is paired with PWR Bank Small. A powerful 1100 lumen output Compatible with all Knog PWR Banks 6 light modes + customizable using Knog's Modemaker app Waterproof with IP66 rating (storm proof) when connected to a PWR Bank Runtimes of up to 250 hrs when paired with PWR Bank Medium INSTRUCTIONS Operation: PWR Lightheads have no buttons! Instead we use rotation to switch the light on & between modes. To turn light On / Off: Rotate the lighthead until it stops and hold in place for 1 second or until the light turns on / off. To change the modes: Once the light is on you can simply change the mode by rotating the light head until it stops. It will spring back into position. Light Modes This table represents the light modes when paired with a PWR Bank Medium to make a 1100 lumen flashlight or bike light (additional mount required) MODE LUMENS RUNTIME Max 1100 1.7 hrs Mid 600 2.5 hrs Stamina 90 18 hrs Pulse 330 7 hrs Strobe 250 12 hrs Eco-Flash 17 250 hrs
The PWR Lighthead 2000L is part of Knog’s PWR Modular System and when combined with a small medium or large PWR Bank can make for a powerful front bike light head torch or flashlight. If you're looking at adding to your lighting solutions the PWR Lighthead 2000L can be a cost effective way of doing just that. While pre-programmed with 6 modes you can customise these to suit your needs with Knog’s Modemaker app – control brightness adjust runtimes and add modes. FEATURES Compatibility - The 2000L lighthead is compatible with the 3350mAh 5000mAh and 10000mAh PWR Banks. Program your modes - Plug your lighthead into your computer download the ModeMaker app and then tailor light modes to your light. Light Beam - Lighthead with elliptical plus spot beam. Especially effective to “be seen”. Accessories Included - Male-Female USB cable. SPECIFICATION Lighthead Output:2000 Lumens. Dimensions:48mm Ø. A powerful 2000 lumen output Compatible with all Knog PWR Banks 6 light modes + customisable using Knog's Modemaker app Waterproof with IP66 rating (storm proof) when connected to a PWR Bank Runtimes of up to 200 hrs when paired with PWR Bank Large Easy twist operation Light Modes This table represents the light modes when paired with a PWR Bank Large to make a 2000 lumen flashlight or bike light (additional mount required) MODE LUMENS RUNTIME Max 2000 2 hrs Mid 500 9 hrs Stamina 200 30 hrs Pulse 1000 20 hrs Strobe 250 35 hrs Eco-Flash 150 200 hrs
If you're looking at adding to your lighting solutions the PWR Lighthead 700L can be a cost effective way of doing just that. It outputs an elliptical style beam for broad and bright road coverage and is compatible with the PWR Modular System. While pre-programmed with 6 modes you can customise these to suit your needs with Knog’s Modemaker app – control brightness adjust runtimes and add modes. BROAD AND BRIGHT COVERAGE - The PWR Lighthead 700L outputs an elliptical style beam for broader and brighter road coverage. This modular 700 lumen lighthead can be swapped between small medium and large PWR Bank batteries for longer runtimes. PROGRAM YOUR LIGHT - When Knog designs each light we put optics at the heart of that equation. Whether it's new LED formations or beam patterns we are committed to making each lumen work harder once you're on the road. You can program the light to suit your needs with Modemaker – control brightness adjust runtimes and add new light modes. SPECIFICATION Dimensions - H: 44mm x W: 31mm x L:31mm. Weight - 34 grams. Lumens - 700. A powerful 700 lumen output Compatible with all Knog PWR Banks 6 light modes + customisable using Knog's Modemaker app Waterproof with IP66 rating (storm proof) when connected to a PWR Bank Runtimes of up to 250 hrs when paired with PWR Bank Medium Easy twist operation Light Modes This table represents the light modes when paired with a PWR Bank Small to make a 700 lumen flashlight or bike light (additional mount required) MODE LUMENS RUNTIME Max 700 1.7 hrs Mid 360 3.4 hrs Stamina 70 20 hrs Pulse 650 7 hrs Strobe 275 10 hrs Eco-Flash 70 165 hrs
The PWR Mountain 2000 Front Bike Light is a high powered modular light designed to flood trails with an extremely bright beam. Best suited to mountain bikers bikepackers and trail riders you can ride confidently with PWR Mountain lighting the way. PWR Mountain is part of Knog’s PWR Modular System meaning you can swap light heads mounts and use its battery as a PWR Bank to charge any USB device. Extremely bright circular flood beam USB Rechargeable Waterproof with IP66 rating (storm proof) 6 light modes + fully customisable with Knog's Modemaker app USB rechargeable Battery can be used separately as a 10000 mAh power bank Bike mount included Easy twist operation RUNTIME MODE LUMENS RUNTIME Max 2000 2hrs Mid 500 9hrs Stamina 200 30hrs Pulse 1000 20hrs Strobe Flash 250 35hrs Eco-Flash 150 200hrs FEATURES PWR is an ecosystem of bike and outdoor products designed to share their battery. But that battery also works as a power bank to charge your devices. PWR Mountain runs for 2 hours at 2000 lumens or up to 200 hours in Eco-flash mode. Elliptical beam - Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Programs your modes - The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light then select and tailor modes from the menu. You can do things such as control brightness adjust runtimes and add new light modes. Functionality - Twisthead operation to turn light on / off and to scroll through light modes (no buttons). Charge your devices - Rear of the light is a USB rechargeable power bank. Use this to charge your phone GoPro or cycle computer on the go. 1 hour riding @2000 lumens means you can almost fully charge your iPhone twice. Charge time 7 hours. SPECIFICATION Light output: 2000 Lumens. Power Bank: 10000 mAh. Dimensions: 129.5 x 48mm ∅. Weight: 335g. Battery indicator. Charges your devices. CNC Machined. Programmable modes. Interchangeable lightheads. Twist operation. USB rechargable. Water resistant when cap is on. INSTRUCTIONS Connect lighthead to PWR bank: Insert the two lighthead plug pins into the battery. When connected your lightheads LED's will flash. Connect lighthead to sidemount: Slide the mount into the slot on the side of the battery. Then tighten the thumbwheel. To remove the mount you will need to loosen the thumbwheel. Operation: Once the lighthead and battery are connected twist the lighthead and hold to turn on twist and release to change modes.
The PWR Rider 450 Duo Bike Light Set is a sleek and bright 450 lumen/12 lumen LED dual bike light designed to be mounted on your helmet. Not just a bike light remove the RedCap and it can be used as a power bank for charging USB devices on-the-go. Its light modes can also be programmed to suit your needs using our Modemaker App. Battery Indicator Always know how much battery you have with the 4 indicator lights. Easy To Mount & Use The helmet mount fits most vented helmets and is easy to mount and swap between helmet types. Charge Your Devices The rear of the light is a USB rechargeable power bank. Press the red button to release the cap and use the PWR bank to charge your phone GoPro cycle computer or other devices. Wide Beam & Customisable Modes It has an elliptical beam for broader bright road coverage. It comes with 6 pre-programmed modes and you can program the light to suit your needs with Modemaker. FEATURES The two Charger lights come with 5 pre-programmed modes just in case you haven't yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens and for those with stamina will run at 200 lumens for 5 hours. Elliptical beam - Elliptical front light beam for wide view works with spot beam for intense light in front of front wheel. Narrow Beam - Rear light features a narrow beam for day & night visibility. Programs your modes - The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light then select and tailor modes from the menu. You can do things such as control brightness adjust runtimes and add new light modes. Charge your devices - Rear of the light is a USB rechargeable power bank. Use this to charge your phone GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours. SPECIFICATION Light output: 450 Lumens (Front) / 12 Lumens (Rear). Power Bank: 2200 mAh. Dimensions: 122 x 30mm ∅. Weight: 115g (Excludes mount & Redcap). Battery indicator. CNC Machined. Programmable modes. USB rechargable. Water resistant when cap is on. Helmet mount also works with GoPro®. Light Modes Please note runtimes will be slightly less when RedCap is in use. MODE LUMENS RUNTIME Ride 450 2 hrs Commuter 190 5.5 hrs Stamina 50 16 hrs Pulse 320 7 hrs Strobe 190 10 hrs Eco-Flash 50 90 hrs INSTRUCTIONS Fitting your new light to your bike: Place your light on the handle bar with knog logo on strap facing forward. There are two holes to choose from depending on your bar diameter. Using the button: To turn on press and hold on/off button until the light turns on. To turn off press and hold the button until the light switches off. To change modes once the light is on a short press of the button changes modes. Charging your lights: PWR Commuter and PWR Rider use a micro USB input to charge. Find this under the end cap. Press RED button to release cap.
PWR Rider is a 450 lumen bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app) then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader brighter road coverage; has a 2 hr runtime at max 450 lumens and 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. RUNTIME MODE LUMENS RUNTIME Ride 450 2hrs Commuter 190 5.5hrs Stamina 50 16hrs Pulse 320 7hrs Strobe Flash 190 10hrs Eco-Flash 50 90hrs FEATURES The two Charger lights come with 5 pre-programmed modes just in case you haven't yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens and for those with stamina will run at 200 lumens for 5 hours. Elliptical beam - Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Programs your modes - The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light then select and tailor modes from the menu. You can do things such as control brightness adjust runtimes and add new light modes. Charge your devices - Rear of the light is a USB rechargeable power bank. Use this to charge your phone GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours. SPECIFICATION Light output: 450 Lumens. Power Bank: 2200 mAh. Dimensions: 122 x 30mm ∅. Weight: 115g. Battery indicator. CNC Machined. Programmable modes. USB rechargable. Water resistant when cap is on. INSTRUCTIONS Fitting your new light to your bike: Place your light on the handle bar with knog logo on strap facing forward. There are two holes to choose from depending on your bar diameter. Using the button: To turn on press and hold on/off button until the light turns on. To turn off press and hold the button until the light switches off. To change modes once the light is on a short press of the button changes modes. Charging your lights: PWR Commuter and PWR Rider use a micro USB input to charge. Find this under the end cap. Press RED button to release cap.
The PWR Road 700 Front Bike Light is one of our best-selling 'see and be seen' lights. Designed for commuters and road cyclists that want to be seen in urban environments as well as being able to light the way ahead on dark roads and paths. Mounting above or below your handlebar to ensure a tidy cockpit you'll be riding confidently with PWR Road 700. PWR Road 700L is a modular bike light. But it's not JUST another bike light. Not only is it a high powered bike light but simply take the product apart and you have much more. A lighthead and a PWR Bank to charge devices that is also the battery for all products in the PWR range. A super bright 700 lumen output 6 light modes + customisable using Knog's Modemaker app Waterproof with IP66 rating (storm proof) Runtimes of up to 165 hrs USB rechargeable Battery can be used separately as 3350 mAh power bank Easy twist operation (perfect for gloves) Mount above or below your handlebar BATTERY INDICATOR - Hate it when you run out of battery with no warning? That'll never happen with PWR Road with 4 built in battery indicator lights. Tap the bottom of the light to activate the battery indicator. 4 lights = fully charged 2 lights = half charged etc. EASY TO MOUNT & USE - This light can be mounted on top or below your handlebars directly under your Garmin or on your helmet. It comes with a side mount and shim that fits handlebars 22.2-38.1mm diameter. Once mounted using PWR Road is a breeze. It's a simple twist-head operation to turn light on & off and to scroll through light modes. CHARGE YOUR DEVICES - Press the red button to release the light head and use the PWR bank to charge your phone GoPro cycle computer or other device. Charge your PWR Road using the included micro USB cable. WIDE BEAM & CUSTOMISABLE MODES - PWR Road outputs a max 700 lumens and can run for up to 195 hours on Eco Flash Mode. Its elliptical beam gives broader bright road coverage. It comes with 6 pre-program d modes and you can program the light to suit your needs with Modemaker. You can control brightness adjust runtimes and add new light modes. RUNTIME MODE LUMENS RUNTIME Max 700 1.7hrs Mid 360 3.4hrs Stamina 70 20hrs Pulse 650 7hrs Strobe Flash 275 10hrs Eco-Flash 70 165hrs SPECIFICATION Dimensions - H: 128mm x W: 31mm x L:31mm. Weight - 125 grams. Lumens - 700. INSTRUCTIONS Connect lighthead to PWR bank:Insert the two lighthead plug pins into the battery. When connected your lightheads LED's will flash. Connect lighthead to sidemount:Slide the mount into the slot on the side of the battery. Then tighten the thumbwheel. To remove the mount you will need to loosen the thumbwheel. Operation:Once the lighthead and battery are connected twist the lighthead and hold to turn on twist and release to change modes.