The Colorblock T-Shirt is a heavier weight 100% carded ringspun cotton t-shirt with a colorblock design and left chest logo graphics.
The Colorblock T-Shirt is a heavier weight 100% carded ringspun cotton t-shirt with a colorblock design and left chest logo graphics.
The Colorblock T-Shirt is a heavier weight 100% carded ringspun cotton t-shirt with a colorblock design and left chest logo graphics.
The Colorblock T-Shirt is a 100% carded ringspun cotton t-shirt with short sleeves, a colorblock design, and left chest logo graphics.
The Rear Seat Wire Lock is available as an additional lock or if you need to replace the cable lock that came with your Urban Iki Rear seat.Please note: For safety reasons, as described in the EN14344 norm, a rear seat mounted on a luggage carrier always needs to be attached to the bicycle frame. TUV tested and approved the frame connection of the Urban Iki Rear seat with the Urban Iki cable lock.
The Urban Iki front seat wire lock very simply locks the seat to the bike for added security when you re out and about. The easy to use combination lock gives you piece of mind when popping into the shops or café.
Key Features:Material: premium flex plus carbon steel,Surface finish: blacken to standard DIN 50938,The wrench is the basic working tool for cyclists extended tours..How to use the tool:To change broken spokes on the right side of the rear wheel, the cassette has to be removed first.,Firstly remove the rear wheel, than fit the tool onto the freewheel nut.,Replace the rear wheel, so that the square edge of the tool presses to the frame or derailleur hanger. After that, push the pedals in the forward direction and loosen the freewheel nut. Remove the cassette and replace the broken spoke. In order to prevent the possibility that the paint on the bicycle frame is damaged, a protective plastic plate should be inserted between the key and the frame..
Features:Wrench for rear sprocket with handle is used for Shimano®, SRAM®, Sun Race®, Suntour® and other cassette sprockets, like the key nr. 1670.7. Fixed handle enables easier use because no additional tools for gripping the key are necessary. The two-component sleeve on the handle fits the hand exactly and enables a perfect grip of the key..
Key Features:Shimano®, SRAM®, Sun Tour®, Chris King® and Sun Race® and others..How to use the tool:Use the freewheel remover together with the Unior 1/2" ratchet 190.1ABI.
Key Features:The freewheel remover is used for removing an assembling Campagnolo® freewheels..How to use the tool:Use the freewheel remover together with the Unior 1/2" ratchet 190.1ABI.
Key Features:Tool is used to remove and install cassette on hubs with 12 mm through axle..
TRP Centrelock RotorWith its two-piece construction that consists of an aluminium central spider and a drilled steel braking surface, this centrelock type rotor from TRP gets the best out of your road bike’s or mountain bike’s (MTB’s) disc brakes. The aluminium centre draws heat built-up away to prevent the dreaded "brake fade" on long descents and it stiffens up the rotor too, for consistent operation as you’re riding at your limit. That’s not all, as TRP has added recessed slots that enable dirt or water build-up to escape quickly, so you can rely on your brakes in all riding conditions.Features:Mount Type: CentrelockBrake Compatibility: Road and Mountain Bike (MTB) brakesThickness: 1.8mmExcellent heat dissipationAluminium spider body channels heat away quicklySix recessed slots allow water, mud, and other debris to escape easilyLock ring not includedManufacturer's Part Number: TRP-25Buy TRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.