Keep yourself protected from dirt and spray during the winter with the Topeak Defender M1 front mudguard. Compatible with all standard front forks including reverse arch designs. The unique quick release attachment system integrates seamlessly allowing you to get a quick and perfect fit every time. Suitable for 26" wheels. Not compatible with 29" wheels
RapidRacerProducts RearGuard Clip-On Off-Road Mudguard The RearGuard Off-Road is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 20 seconds and stays put!The RearGuard is designed for use off road on either a mountain bike or CX bike, it's a fast fitting mudguard for those last minute decisions. It attaches underneath the saddle with 1 velcro strap and takes less than 20 seconds to fit. It will never come off during your ride and offers great protection for your REAR and back The 3 new creases add stability and strength and the additional length adds protection over rough terrain Features: Quick and easy to fit Offers protection from mud and spray Velcro fastener ensures a secure fit Weight: 41gNot recommended for use with dropper seat posts.Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts RearGuard Clip-On Road Mudguard The RearGuard ROAD is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 10 seconds and stays put!Features: Quick and easy to fit Offers protection from road spray Velcro fastener ensures a secure fitBuy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts EnduroGuard Standard Front MudguardThe EnduroGuard is a unique mudguard, which can be used as a front or rear guard. When used on the front, it stops the mud and spray that the back of the front tyre throws in your face. On the rear, it protects your linkages and shock from mud and spray. Perfect compatibility for cross country or 4x, the standard works on short travel XC and 4X forks from 80mm to 120mm. Features:Works as a front or rear mudguardClip on mudguardWheel & Tyre Compatibility: all wheel sizes and tyres up to 3"Fork Compatibility: 80mm to 120mmWeight: 23g (standard)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts EnduroGuard Standard Front MudguardThe EnduroGuard is a unique mudguard, which can be used as a front or rear guard. When used on the front, it stops the mud and spray that the back of the front tyre throws in your face. On the rear, it protects your linkages and shock from mud and spray. Perfect compatibility for cross country or 4x, the standard works on short travel XC and 4X forks from 80mm to 120mm. Features:Works as a front or rear mudguardClip on mudguardWheel & Tyre Compatibility: all wheel sizes and tyres up to 3"Fork Compatibility: 80mm to 120mmWeight: 23g (standard)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
A package combination of the Swan Road (rear) and Croozer Road (front) mudguards for road and hybrid bikes. The rear mudguard is designed to blend aesthetically with the narrower tyres on road bikes and sports hybrids and is constructed from technopolymer resin for great durability. It uses a MD-Turn fixation which is adjustable for 25 to 32mm diameter seat posts and has a blade width of 45mm. The front mudguard offers great mud protection with the convenience of a fast fit, tool free mounting system. A narrow width at the top to prevent fouling of cables, the Croozer Road tapers out to be 20mm wider at the end where it counts when your wheel turns. The MD-Quick fixation attaches to the fork and stays and is adjustable up to 75mm.
Following a design update, the HighTrek clip-on mudguard set impresses with its sporty look. It can be mounted to seat tube diameters of between 28 and 32 mm. The well-thought-out universal fastener and clip enable the mudguard to be mounted and removed quickly without any tools.Colour: BlackWeight: 300gWheel size: 26", 27,5" (650b)", 28 "Tyre width: 54mmLength front fender: 560mmLength rear fender: 700mm
The Deflector RM60+ mudguards offer additional protection, an optimal fit is achieved by extra adjustment. great protection is ensured even on rough terrain. Specially designed for mountain biking, they are easy to install and fit perfectly thanks to the MD-Turn systemMD-Turn system: Quick screw-on mounting system on seat post from ? 25 to 32mmDouble Orientation: Optimal tire coverageReflective Ring: For a better visibilityAdjustable: Optimal protectionMaterial: Technopolymer resin with dual material spoiler,Fixation: MD-Turn: On seat post, adjustable for 25 to 32mm,Blade Width: From 66 to 72mm,Wheel Dia: 26 and 27.5 inch,Weight: 220g.
As the gravel segment expands, cyclists face new challenges. The issue of having dirt thrown in your face is a well known problem among mountain bikers. With huge clearances for wide tires in the front fork, gravel riders are now facing a similar issue."This one is a win for sure. ...it seems to outperform every other mini front fender I have tried." Cory Benson, BikerumorWhile mountain bikers are used to mud, gravel bikers face a different challenge. Anyone who has ridden on a wet gravel road is familiar with the mixture of fine sand and water that seems to be designed especially to seek and destroy bearings, not to mention what it does to your eyes on a long ride.The MUDDER Mini is here to offer relief for your face and headset bearing. Simply mount it to your fork legs just above your front tire and you will dramatically reduce the amount of spray in the critical areas. The MUDDER Mini attaches with innovative adjustable anti-slip straps to guarantee an instant and perfect fit on all fork sizes.Protecting face and headset bearings,Mounts easy and securely with antislip straps ,Fits all cross/gravel forks,Super lightweight, only 21 grams,Suitable for tire widths 32-55 mm,.Key Features:Technical data,Measures: 90 x170 mm (effective),Weight: 21 g ,Material: 0.8 mm PP (Polypropylene),.Fit The MUDDER Mini will fit all gravel/cx forks with clearance for tire widths between 32 mm up to 55 mm. It will not work on a road fork with narrow clearance or for fat bikes. The correct position is about 10 mm above the tire. Aligning the position to the tire and not the fork crown increases efficiency and is made possible by our custom hook and loop straps. Make sure that the mudguard doesn't touch your down tube when turning the handlebar.Purpose This mudguard is specifically designed to block dirt from being thrown forward and potentially impair your vision during high speed riding and the wellness of your lower headset bearings. It will not protect you from general spray coming from your front tire or your feet and lower legs.Adjustable anti-slip 2-in-1 hook and loop straps The specially designed straps have enough friction to prevent the mudguard from sliding down on a conic fork leg. However, it needs to be tighten firmly to stay up. The open ended design of the strap will allow you to adjust the length and thereby center the position of the ASS SAVERS logo on the fork leg. You can also inverse the strap if you prefer to have a no-logo appearance. Pre-folding The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions to ensure the best performance.
The all new FENDOR BENDOR Regular is a great option for those truly wet moments when you wish you had a fully protecting mudguard. It attaches with no tools, to virtually every bike in just a few seconds. Still foldable, it can easily be stored in a bag or jersey pocket for wet weather deployment.Universal fitWith the newly developed attachment construction, FENDOR BENDOR Regular is now completely self supported and therefore possible to mount on bikes without the sideway support of the seat stays or the support of a brake bridge. You could also mount it above your caliper brake to avoid interference with the brake.For streets and roadsThe FENDOR BENDOR Regular has been adapted to fit the smaller and more delicate tubing of road and urban bikes. It has a slightly slimmer profile than its predecessor that will look at home on everything from your vintage track bike to your hyper modern carbon road bike. It remains folded in two places to keep the compact folded state of the previous generation that easily slips into a jersey pocket or backpack.Easy to mount, no tools required ,Fits almost all bikes,Super lightweight, only 50 grams,Longlasting, durable materials,Made in Sweden,.Key Features:Technical data,Measures: 540x65 mm (effective),Weight: 50 g ,Material: 1 mm PP (Polypropylene),.Fit The Fendor Bendor fits all frames with standard seat stays. It's self supportive and doesn't require support from the brake bridge or the seat stays. It can also be mounted directly on a seat post (as low as possible for best effect). The Fendor Bendor will not fit if you have monostay frame or center pull brake.Prefold The scoring lines along the fender need to be folded hard in order to give the it the necessary rigidity and strength. Take extra care to fold down the outer edges to make sure your Fendor Bendor is functioning properly.Frame protection Each Fendor Bendor is delivered with a small set of transparent 3M polyurethane protection stickers. Use these to protect your seat stays from scratches from the fender.Storage The Fendor Bendor can always be folded back into a small package for storage in a bag or jersey pocket.
Clip-on mudguard set for trekking bikes with Universal fastening and frame clip. Key Features:Compatible with frame tubes between 28 -35mm diameter. ,Suitable for 24”-28" Wheels,Covers up to 45mm wide tires ,Weight: 185g.
Following a design update, the HIGHTREK clip-on mudguard set impresses with its sporty look. It can be mounted to seat tube diameters of between 28 and 32 mm. The well-thought-out universal fastener and clip enable the mudguard to be mounted and removed quickly without any tools.