As the gravel segment expands, cyclists face new challenges. The issue of having dirt thrown in your face is a well known problem among mountain bikers. With huge clearances for wide tires in the front fork, gravel riders are now facing a similar issue."This one is a win for sure. ...it seems to outperform every other mini front fender I have tried." Cory Benson, BikerumorWhile mountain bikers are used to mud, gravel bikers face a different challenge. Anyone who has ridden on a wet gravel road is familiar with the mixture of fine sand and water that seems to be designed especially to seek and destroy bearings, not to mention what it does to your eyes on a long ride.The MUDDER Mini is here to offer relief for your face and headset bearing. Simply mount it to your fork legs just above your front tire and you will dramatically reduce the amount of spray in the critical areas. The MUDDER Mini attaches with innovative adjustable anti-slip straps to guarantee an instant and perfect fit on all fork sizes.Protecting face and headset bearings,Mounts easy and securely with antislip straps ,Fits all cross/gravel forks,Super lightweight, only 21 grams,Suitable for tire widths 32-55 mm,.Key Features:Technical data,Measures: 90 x170 mm (effective),Weight: 21 g ,Material: 0.8 mm PP (Polypropylene),.Fit The MUDDER Mini will fit all gravel/cx forks with clearance for tire widths between 32 mm up to 55 mm. It will not work on a road fork with narrow clearance or for fat bikes. The correct position is about 10 mm above the tire. Aligning the position to the tire and not the fork crown increases efficiency and is made possible by our custom hook and loop straps. Make sure that the mudguard doesn't touch your down tube when turning the handlebar.Purpose This mudguard is specifically designed to block dirt from being thrown forward and potentially impair your vision during high speed riding and the wellness of your lower headset bearings. It will not protect you from general spray coming from your front tire or your feet and lower legs.Adjustable anti-slip 2-in-1 hook and loop straps The specially designed straps have enough friction to prevent the mudguard from sliding down on a conic fork leg. However, it needs to be tighten firmly to stay up. The open ended design of the strap will allow you to adjust the length and thereby center the position of the ASS SAVERS logo on the fork leg. You can also inverse the strap if you prefer to have a no-logo appearance. Pre-folding The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions to ensure the best performance.
A package combination of the Swan Road (rear) and Croozer Road (front) mudguards for road and hybrid bikes. The rear mudguard is designed to blend aesthetically with the narrower tyres on road bikes and sports hybrids and is constructed from technopolymer resin for great durability. It uses a MD-Turn fixation which is adjustable for 25 to 32mm diameter seat posts and has a blade width of 45mm. The front mudguard offers great mud protection with the convenience of a fast fit, tool free mounting system. A narrow width at the top to prevent fouling of cables, the Croozer Road tapers out to be 20mm wider at the end where it counts when your wheel turns. The MD-Quick fixation attaches to the fork and stays and is adjustable up to 75mm.
Key Features:Compatible with suspension forks, rigid forks and V-Brakes,Useable for kids bicyles from 16 to 20 inch,Colour: black,Dimensions: 614 x 78x mm.
Zefal Swan Road Bike Rear MudguardQuick and easy to install and remove, the versatile and adaptable Swan Rear Mudguard gives the coverage you need for riding your road bike in wet conditions. Coming with Zefal’s MD-Turn mounting collar, it suits all the commonly used seatpost sizes, even on classic bikes. There’s also a reflective section on the mount to make you more visible at night.Adjustable Clip-On MudguardTo ensure maximum protection, the mudguard arm can be adjusted up or down. The shape of the guard follows the wheel, to give you the best protection from spray and dirt. Fitting the Swan couldn't be easier - the MD-Turn system requires no tools and is adjustable for seat posts from 25 to 32mm in diameter.Features: Material: Technopolymer Resin Wheel Size: 28"/700c and 650c Maximum Tyre Size: 700x32c Dimensions: 530x45mm Blade Width: 48mm / 1/8" Use: Road Rear mudguard can be fitted quickly and easily to all road bikes Reflective ring offers increased visibility Can be fitted without tools Quick screw-on mounting system on seat posts from 25 to 35mm Adjustable angle Weight: 150g Buy Zefal Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Keep yourself protected from dirt and spray during the winter with the Topeak Defender M1 front mudguard. Compatible with all standard front forks including reverse arch designs. The unique quick release attachment system integrates seamlessly allowing you to get a quick and perfect fit every time. Suitable for 26" wheels. Not compatible with 29" wheels
RapidRacerProducts EnduroGuard Front MudguardA unique mudguard, the EnduroGuard Mudguard can be used either on the front of your mountain bike or on the rear. It prevents mud, water and whatever else the trail throws up from the back of the tyre from reaching your face or back. Plus, in addition to keeping you clean, it protects your frame's rear linkages too. Clip on Mountain Bike MudguardAvailable in two sizes, the "standard" model suits shorter travel cross country and 4X forks with 80-120mm travel. The longer "large" model is best for trail, enduro and downhill bikes with 130-200mm travel.Features:Works as a front or rear mudguard Front guard protects you, rear guard protects your linkages and shock Available in two sizes, to fit all bikes Weight: 23g (standard), 26g (large)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
SKS Speedrocker Extension Mudguard FlapThe SKS Speedrocker Extension is an additional accessory for the SKS Speedrocker mudguard. This extension flap provides extra mud and water spray protection from the road or trail. Extension Flap for Additional Mudguard ProtectionThe Speedrocker Extension clip-on mudguard extension mainly protects riders behind you from dirt and wet conditions. The extension made of black, impact-resistant plastic can be easily clipped onto the tried and tested Speedrocker rear mudguard, thus extending it by 170 mm. It can be mounted and removed without any tools in just a few seconds. The splashing between the tyre and mudguard at the lower end also allows it to better deflect any spray water and mud. This not only protects the rider's back but also their cycling companion from any flying dirt.Features: Part Number.: 11656 Weight: 36g Length Rear Fender: 170mmBuy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts EnduroGuard Front MudguardA unique mudguard, the EnduroGuard Mudguard can be used either on the front of your mountain bike or on the rear. It prevents mud, water and whatever else the trail throws up from the back of the tyre from reaching your face or back. Plus, in addition to keeping you clean, it protects your frame's rear linkages too. Clip on Mountain Bike MudguardAvailable in two sizes, the "standard" model suits shorter travel cross country and 4X forks with 80-120mm travel. The longer "large" model is best for trail, enduro and downhill bikes with 130-200mm travel.Features:Works as a front or rear mudguard Front guard protects you, rear guard protects your linkages and shock Available in two sizes, to fit all bikes Weight: 23g (standard), 26g (large)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts RearGuard Clip-On Off-Road Mudguard The RearGuard Off-Road is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 20 seconds and stays put!The RearGuard is designed for use off road on either a mountain bike or CX bike, it's a fast fitting mudguard for those last minute decisions. It attaches underneath the saddle with 1 velcro strap and takes less than 20 seconds to fit. It will never come off during your ride and offers great protection for your REAR and back The 3 new creases add stability and strength and the additional length adds protection over rough terrain Features: Quick and easy to fit Offers protection from mud and spray Velcro fastener ensures a secure fit Weight: 41gNot recommended for use with dropper seat posts.Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts RearGuard Clip-On Road Mudguard The RearGuard ROAD is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 10 seconds and stays put!Features: Quick and easy to fit Offers protection from road spray Velcro fastener ensures a secure fitBuy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The perfect last minute mudguard. Very effective and fast fitting, RearGuard simply attaches the saddle rails with 2 velcro straps. It takes only 30 seconds! RearGuard offers great protection for your rear whether you're on or off road. Thanks to a custom thickness polypropylene, RearGuard is not flimsy, but also offers an excellent fit, unlike some guards available. The tough fitting strap will work with any post including aero posts. Key Features:Ideal for road, mountain and cyclo-cross bikes.One size fits all.Velcro fitting strap included.Made in the UK.33g.
RapidRacerProducts EnduroGuard Standard Front MudguardThe EnduroGuard is a unique mudguard, which can be used as a front or rear guard. When used on the front, it stops the mud and spray that the back of the front tyre throws in your face. On the rear, it protects your linkages and shock from mud and spray. Perfect compatibility for cross country or 4x, the standard works on short travel XC and 4X forks from 80mm to 120mm. Features:Works as a front or rear mudguardClip on mudguardWheel & Tyre Compatibility: all wheel sizes and tyres up to 3"Fork Compatibility: 80mm to 120mmWeight: 23g (standard)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.