Designed for bikes without mudguard eyelets, the M Part QDR Mudguards offer excellent coverage in an incredibly quick and easy to fit package. Perfect for bikes without mudguard eyelets and can be fitted or removed in under a minute3.2mm stainless steel stays are highly durable and are quick and easy to assemblePolycarbonate guard material is incredibly tough and virtually unbreakableRubber tail helps to protect riders behind youIncredibly easy to fit, the QDR Mudguards can be fitted or removed in under a minute, perfect for the rare occasions the sun makes an appearance in winter! The durable stainless steel stays and fittings are incredibly durable and will shrug off the worst the winter weather can throw at them. Keeping the elements away are the massively strong polycarbonate guards, which are incredibly tough and virtually unbreakable; they're certainly not afraid of taking abuse from the daily commute! Supplied with all you'll need to get going, the M Part QDR Guards are tough, versatile and incredible value.
The Zefal Paragon mudguards are a universal fit so they fit 26'' and 28'' wheels which is great for city and leisure bikes. The mudguards now offer better protection of the rider and following companions by covering more than 80% of the wheel which will no doubt keep everyone happy when your out on a club run! Constructed from technopolymer resin which is extremely durable with U stays which keep the guards rigid so you don't have to worry about them moving or rubbing against the tyre. Both guards offer great protection while the lower extension protects the front derailleur from all the spray that is thrown up while both guards benefit from reflective parts which offer increased visibility in low light conditions.
3.0mm twin-parallel, stainless-steel stays are light and strong and provide secure support. Stays slide in adjustable brackets for an optimal and easy fit. Secu Clip 'break-away' fittings on front stays offer a secure yet safe union with the fork. Fenders are constructed from PET plastic and carry an aluminium foil insert, making them durable and light. Mud flaps front and rear provide enhanced protection. Pre-assembled for an easy fit. Supplied with everything you need to fit the mudguards, including a full fitting kit, allen key, braze-on bolts and a snap-fit sliding bridge for the rear.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Max Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Maximum Protection RapidRacerProducts offers the best protection in the world, this version is 68mm longer at the rear. No other mudguard offers more protection. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer - 21mm longer - than some available offerings as this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screw driver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the Proguard Max Mudguard as a means of offering greater protection for your seals from high velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
M Parts Commute Mudguards are a top choice for riders who want great value, reliable mudguards that are built to last. Now in their 2nd generation, the Commute Mudguards are tough, versatile and ready to keep the elements at bay.Factory pre-installed 3.2mm stainless steel stays for quick and easy assemblyPolycarbonate guard material is incredibly tough and virtually unbreakableSupplied with M5 and M6 stainless hex bolts for fittingApproximately 600g including fittingsIncredibly easy to fit, the Commute Mudguards come with the durable stainless steel stays pre-installed from the factory, so you can have them fitted in mere minutes. Keeping the elements away are the massively strong polycarbonate guards, which are incredibly tough and virtually unbreakable; they're certainly not afraid of taking abuse from the daily commute! Supplied with all you'll need to get going, the M Part Commute Guards are tough, versatile and incredible value.
M Parts Commute Mudguards are a top choice for riders who want great value, reliable mudguards that are built to last. Now in their 2nd generation, the Commute Mudguards are tough, versatile and ready to keep the elements at bay.Factory pre-installed 3.2mm stainless steel stays for quick and easy assemblyPolycarbonate guard material is incredibly tough and virtually unbreakableSupplied with M5 and M6 stainless hex bolts for fittingApproximately 600g including fittingsIncredibly easy to fit, the Commute Mudguards come with the durable stainless steel stays pre-installed from the factory, so you can have them fitted in mere minutes. Keeping the elements away are the massively strong polycarbonate guards, which are incredibly tough and virtually unbreakable; they're certainly not afraid of taking abuse from the daily commute! Supplied with all you'll need to get going, the M Part Commute Guards are tough, versatile and incredible value.
This XL-sized fender is specifically designed for compatibility with all front suspension forks and bikes with disc brakes only. It features a soft deformable nose, which is developed to not clog up with mud as you weave your way from trail to trail. Crud has also equipped this full-front mudguard with an easy-to-install design that allows you to fit it to your front fork in seconds without the need for any tools. As a result, it stays in place during the most demanding of MTB rides, while keeping you protected against unwanted spray and dirt. Manufacturer's Part Number: XLF
Full length mudguards offer the maximum in protection from standing water keeping both you and your bike clean and dry even in the worst conditions. The LifeLine Narrow Road Mudguard Set features a PET/Aluminium construction with steel wire stays making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Plastic scratch guards on the ends of the mudguard blades provide additional protection. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. Low profile stay ends reduce the chances of catching your foot when cornering. The LifeLine Narrow Road Mudguard Set is compatible with calliper or disc brakes and comes complete with full installation instructions and all mounting hardware. Please Note: These mudguards are designed to fit with 700c wheels but the metal stays may require cutting with a hacksaw or heavy duty wire cutters during fitting.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Standard Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer to improve the protection of the face and eyes when riding at high speed. The turndown at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the RapidRacerProducts Proguard Standard Mudguard as a means of offering greater protection for your seals from high-velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
Best protection with high luminosity! The NIGHTBLADE MTB mudguard for the rear wheel is an enlightening example of integrated bicycle solutions. It not only provides optimal splash protection the NIGHTBLADE also ensures greater safety in road traffic from the integrated rear light. The rear light with integrated rechargeable battery can be removed and charged with a USB connection. The rear light with the integrated battery can be removed and can be recharged using a USB connection. The spoilers of softer plastic serve as edge protectors when getting on or off the bike. The simple quick-release mounting system enables the NIGHTBLADE to be mounted on almost all seat posts using power straps and the 2-joint technology enables them to be optimally adjusted to mountain bikes. The mudguards are suitable for mounting with 26‘, 27.5‘‘ and 29‘‘ tyres.
Designed for bikes with mudguard eyelets, the M Part QF Mudguards offer excellent coverage in an incredibly quick and easy to fit package. The clever design allows you to remove the fenders and stays quickly when the rain clears.Suit for bikes with eyelets and 700c tyres up to 28mm wideFenders and stays can be quickly removed if the rain clears3.2mm stainless steel stays are highly durable and are quick and easy to assemblePolycarbonate guard material is incredibly tough and virtually unbreakableRubber tail helps to protect riders behind youIncredibly easy to fit, the fenders and stays can be quickly removed, perfect for the rare occasions the sun makes an appearance in winter! The durable stainless steel stays and fittings are incredibly durable and will shrug off the worst the winter weather can throw at them. Keeping the elements away are the massively strong polycarbonate guards, which are incredibly tough and virtually unbreakable; they're certainly not afraid of taking abuse from the daily commute! Supplied with all you'll need to get going, the M Part QF Guards are tough, versatile and incredible value.
Full-length mudguards offer the maximum in protection from standing water keeping both you and your bike clean and dry even in the worst conditions. The LifeLine Wide Mudguard Set features a PET/Aluminium construction with steel wire stays making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Plastic scratch guards on the ends of the mudguard blades provide additional protection. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. Low profile stay ends reduce the chances of catching your foot when cornering. The LifeLine Wide Mudguard Set is compatible with caliper or disc brakes and comes complete with full installation instructions and all mounting hardware. Please Note: These mudguards are designed to fit bikes with 700c wheels but the metal stays may require cutting with a hacksaw or heavy-duty wire cutters during fitting. The scratched stock option in the dropdown menu has a small mark on the rear mudguard. This is cosmetic only and does not affect the structural integrity of the mudguard.