Magura Storm SL Rotor For the last 15 years Magura has been gaining experience in the development and production of disc brake rotors for the demanding off road use on mountain bikes. Combining the wealth of experience and the latest results of Mission Performance, Magura have achieved a maximum of stopping power, control and ventilation at a minimum weight (10% weight saving compared to old model). One look is enough as the cool design says it all: the STORM will set a new benchmark when it comes to weight, performance and durability! Magura Storm SL Rotor Features: Optimised rotor geometry for extreme temperature absorption without disc warping. Perfect friction balance between brake pad and rotor for maximum braking power in all conditions, even after extremely long and difficult descents. Wider brake surface prevents tipping of brake pads. This optimises brake modulation without squeaking or brake pad judder. Bigger surface for optimised heat dispersion through more cut outs. Through latest FEM-calculations optimised transitions between brake surface, spoke and fixing ring. Therefore massive weight reduction by equally high stiffness. Optimised production processes creating zero fault rate and therefore allowing further refinements and weight savings without sacrificing strength and durability. Reduced wear compared to old SL rotor. Magura Storm SL Rotor Technical Data: Weight: 15% less than predecessor (From 147g/0.32lbs. (203mm) to 75g/0.16lbs. (140mm) Compatibility: all disc brake models except Gustav M Material: high performance steel Mounting: IS 6-hole version Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT Trail SL Mountain Bike Disc BrakesThis superb Brake Set from Magura is specifically designed for MT Trail use as it offers outstanding braking power with lightweight technologies. The MT is 15% lighter than the MT7 and 5% heavier than the MT8 - but it provides you with 100% unrivalled braking performance.Features:Material: Lever: Carbotecture SL, Carbolay (Carbon Fibre); Caliper: AluminiumCaliper: Hydraulic four-piston fixed caliper at the front, two pistons at rear - postmount, IS2000 with adapterPads: OrganicBrake Lever: Ergonomic 2 finger Carbolay lever and handlebar clampTechnologies:Carbotecture SL: Carbon fibres are extremely light, impact-resistant, shatter-proof and have the highest degree of bending strength in all the materials used in bike and motorsports components today. There is no better material to meet the demands placed on today's high-tech brakes.Weight Ratio Performance: Magura brakes are characterized by their high degree of thermal resistance, achieved through optimal weight allocation. This is optimal material usage and best-in-class lightweight construction where it's really needed.MagnetiXchange: Magnetic pistons fit perfectly into the brake caliper, guaranteeing quick and easy brake pad replacement.OPD: Caliper in a one-piece design.EBT: Easy Bleed Technology: easy and fast bleeding.Shift Mix: For mounting SRAM Triggers.The brake is delivered filled and bled. Please pay attention to the maximum disc diameter recommended for your fork/frame.Note: The brake is delivered without adapter and without disc rotor. These parts are sold separately.The brake hose can be easily cut to the required length.Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT8 Pro Mountain Bike Disc BrakeThis lightweight MTB disc brake is engineered for conquering the cross-country and marathon segment. It offers uncompromising performance at competition level and is equipped with a 1-finger aluminium lever blade. Additionally, it features lightweight carbotecture SL housing that's incredibly resistant. Magura has also kitted out this version with tool-free width adjustment, which means you won't have to worry about forgetting your tools on event day. Finally, its one-piece 2-piston caliper is constructed from forged aluminium, which gives it an extraordinary degree of rigidity, making it one of the strongest and most easily-modulated brakes around. Features: Material: Aluminium Use: XC, All Mountain Lever Blade: 1-finger EBT: Yes Banjo Fitting: Yes Pistons: 2 pistons Mounting: PM/IS Toolless reach adjust Flip-flop design Weight: 225gBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT7 Pro HC Mountain Bike Disc BrakeDesigned for mountain bike (MTB) use, this Disc Brake from Magura delivers smooth and reliable braking, whatever challenge you meet on the trails. Benefiting from a defined bite point and one-finger lever for precise control in difficult terrains. What's more, it features a lightweight aluminium lever blade which allows you to ride as aggressively as the trail demands.Features:Material: Master Cylinder: Carbotecture; Lever Blade: Hollow Aluminium; Caliper: AluminiumAdjustment: Tool-free reach adjustBrake Fluid Compatibility: Royal BloodBrake Mount: PM/ISBrake Type: Hydraulic disc brakeLever: One-finger HC leverUse: Mountain Bike (MTB)Four-piston design which provides enormous stopping powerSingle or Pair: SingleWeight: 255gBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT8 Carbon Mountain Bike Disc BrakeThese brakes are designed for those who are serious about shaving every possible gram from their bikes. Despite its ridiculously low weight of only 299g, the MT8 offers the highest braking power and stability of Magura's 2-piston family.Featuring an uncompromising lightweight carbon construction, high braking force, and a forged, one-piece brake caliper, it's no surprise that this brake is the first choice for Cross Country Pro's like Olympic champion Sabine Spitz.Features: Ergonomic, 2-finger, full-carbon brake lever Carbotecture housing & handlebar clamp Adjustable lever reach Forged, 4-piston brake caliper MagnetiXchange brake pistons for easy brake pad replacement Compatible with all Magura Storm and Storm SL discsSpecifications: Material Master: Carbotecture SL Material Lever blade: Carbolay Material Caliper: Aluminium Hydraulic: Yes Brake Fluid: Royal Blood EBT: Yes BAT/TPA: No Banjo Fitting: Yes 2-Piston: Yes 4-Piston: No Reach Adjust: Yes - Allen key 3mm Flip-Flop: Yes Shift Mix: Yes Remote Mix: Yes Recommended rotor: Storm HC Lever blade: 2-Finger 4-Finger (opt.) 2-Finger ball-end (opt.) 4-Finger ball-end (opt.) Tubing: Magura disc tube eBike Switch: No Mounting: PM/IS Weight: 299gBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT4 Mountain Bike Disc BrakeThe Magura MT4 MTB Disc Brake is the perfect all rounder for mountain bikers who value stability and brake power, without having to compromise on weight.The Carbotecture master cylinder keeps the entire weight down to just 345 grams each. This material is impact-resistant, shatter-proof and provides the highest degree of bending strength in all the materials used in bike and motor sports components today. The MT4 caliper benefits from race proven technologies seen on the MT7 and MT8 models, as Magura has extended these qualities across the range. The MT4 is also suitable for use on e-bikes up to 25 km/h.Features: Ergonomic, 2-finger, aluminium brake lever Carbotecture housing & handlebar clamp Adjustable lever reach Forged, 2-piston brake caliper MagnetiXchange brake pistons for easy brake pad replacement Compatible with all MAGURA Storm and Storm SL discsSpecifications: Material Master: CarbotectureMaterial Lever blade: Aluminium Material Caliper: Aluminium Hydraulic: YesBrake Medium Royal Blood EBT: Yes BAT/TPA: NoBanjo Fitting: Yes2-Piston: Yes 4-Piston: NoReach Adjust: Yes - tool T25 Flip-Flop: Yes Shift Mix: YesRemote Mix: Yes Recommended rotor: Storm HC Lever blade: 2-Finger 4-Finger (opt.) 2-Finger ball-end (opt.) 4-Finger ball-end (opt.)Tubing: Magura disc tube eBike Switch: No Mounting: PM/ISColors: Black (Master & Lever), Polished Black Anodized (Caliper)Weight: 345g Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Look Trail Roc Flat Mountain Bike PedalsWith a distinctive lightweight, low profile design, these high-quality mountain bike (MTB) pedals deliver centred control and feedback with adjustable pins for ultimate grip. Look has also equipped these with its championship proven bushing and bearing system on oversized 17mm axles, so you can benefit from a stable platform that inspires confidence and control urging riders to push their boundaries to a whole new level. Whether smashing rocks on steep technical trails or floating it out with style to spare, Look Trail Roc pedals give riders of all levels a solid ground to stand on.Get A GripWhen the trail points down and traction is at a premium, the TRAIL ROC pedals bite back and give you the traction you need. With 12 steel pins per side and a concave shape created from varied pin lengths - 10mm outer and 8mm inner - your foot will be cradled securely and confidently to take on any challenge the trail throws at you.Durability - The Only OptionThe aluminium-bodied pedals take full advantage of LOOK's pedal design expertise. Each pedal features two pairs of ball bearings at each end of the spindle and a DU bushing situated to keep them spinning smoothly and reliably regardless of conditions and abuse from the trail.Features: Body Material: Alloy Spindle Material: CrMo (Chromoly) Use: MTB, Enduro, Downhill and BMX Q-Factor: 61.5mm Grip: 12 metal pins per side Type: Flat pedals Platform Size: 110x110mm Profile: 17mm Single or Pair: Pair Weight: Pair: 430g; Per Pedal: 215gTechnologies: Platform pedal, built to perform to the highest level and deliver for the most aggressive riding styles. Forged and machined, wide span alloy Trail Roc body provides ultimate strength and sharp style. With 12 adjustable stainless steel pins on each side you can tune foot plant traction exactly how you want it. Minimum stack height for a gripped and grounded stance, paired with maximum clearance for getting on the gas fastest out of corners. Ultra-strong 17mm axles developed to suck up seismic slams and death wish drops and still roll out straight every time. When it comes to 'spin-it-to-win-it' speed nobody can match LOOK's legendary experience. Trail Roc uses a premium bearing and bushing system for speed boosting efficiency twinned with epic durability. Laser-etched logos underline Trail Roc's long-lasting style.Manufacturer's Part Number: PEPL24263Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Look X-Track Mountain Bike CleatsThe Look X-Track Cleats are exceptional quality cleats, which are compatible with all standard SPD cleat systems, both shoes and pedals. These cleats however provide optimised performance with the Look X-Track pedal system.Features:Micro shim for fixing 2 screwsEngagement / Disengagement: standard function, unidirectional disengagementCompatible with all standard SPD pedalsBuy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Look X-Track Mountain Bike PedalsEnjoy high-performance pedalling power, no matter what challenge you meet on the trails with these Mountain Bike (MTB) Pedals from Look. Ready for tough terrain, they benefit from a heavy-duty engagement mechanism, a double weather resistant seal on the spindle and an optimised platform size for exceptional power to weight ratio. The ideal addition to your MTB, they are ideally suited to handle the demands of cross country (XC) racing.Features:Body Material: AluminiumSpindle Material: Chromoly (CrMo)Intended Use: Cross Country (XC) competition and leisurePedal Stack Height: 16.8mm with cleatsPlatform Width: 57mmPlatform Area: 350mm²Tension: 6Nm to 14Nm adjustable springCleats Included: Supplied with cleatsCleat Type: Standard cleat includedFloat: 6°Weight: Pedal: 195g; Pair with Cleats: 494gTechnologies:Optimal Power to Weight Ratio: All the energy you produce is transferred to your MTB through your pedals, so their role is absolutely crucial. Look’s objective with the X-Track pedals was to find solutions that would enable the most efficient transfer of rider power possible. That is why Look has chosen to place the weight/contact surface ratio as the primary factor when defining the product. Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh. The challenge faced by Look's engineers was to identify the zones that are useful for energy transmission and then optimise the pedal design in order to limit any that are unused. This task allowed Look to engineer a pedal with the best weight/contact surface ratio on the market.Lateral Contact Support: Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.Mechanism Geometry: The forces experienced when riding in wet conditions varies greatly compared to riding in the dry, but the highest performance is always expected regardless of weather conditions. The mechanism in the Look X-Track pedals works regardless of external conditions and more space allows for the shedding of mud, dirt and grit. These zones give the user a constant and stable feeling of being securely clipped in, in all conditions.Adjustable Spring Tension: An adjustable tension screw allows you to fine-tune the entry/release resistance of the spring mechanism to suit your personal skill level and preferred feel.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptional, modern and performance-orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand the usage of the Look X-Track pedals further, they have fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride. Please Note: These pedals come with Look SPD-style cleats to install onto your SPD-compatible cycling shoes. However, if you wish to use them with shoes that have Shimano SPD cleats installed they will be compatible with these too.
Lizard Skins Charger Grips Made from a new 'Elastomer' rubber, the Charger is an amazingly comfortable grip that will be soft but last longer than conventional 'Crayton' Rubber Buy Lizard Skins Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Get on the dirt and ride your way to your first singletrack. Tempt is that friend that opens a whole new world to you.Confidence InspiringPerfect as your first mountain bike, the ALUXX-Grade Aluminum frame is lightweight, capable and durable.VersatileTempt’s performance-minded yet comfortable geometry gives it the versatility for both commutes around campus and off-road rides.XC ControlA suspension fork offers control, comfort and stability over bumpy terrain. Depending on frame size, the fork comes with 80mm or 100mm of travel.