Ready for action, this tough part is perfect for protecting your frame while also providing an additional point of support for aligning your front mech.
The all-new Hope Tech 4 V4 Hydraulic Disc Brake is the culmination of of Hope's 25+ years experience of designing and manufacturing some of the best brakes ever made. With 30% more power than the old Tech 3 E4 along with a lighter lever action, the Tech 4 V4 is a stunningly powerful brake ideal for enduro, freeride and downhill bikes. 30% extra power compared the old Tech 3 leverLever shape updated to provide a more ergonomic shapeHinged clamp reduces weight and improves ergonomicsTool free bite point and reach adjustments for easy, personalised setupRigid CNC'd one piece 4 piston caliper with hybrid piston design for improved reliabilitySupplied with new Racing Compound pads for improved power and modulationThe Tech 4 V4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation. Not only this, but the updated lever and blade provide a 30% increase in pressure over the Tech 3 lever for a bucket load of extra braking power! The Tech 4 lever also retains Hope's signature tool free bite point and reach adjustments. The updated V4 caliper utilises hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use. If you want the ultimate in braking power, look no further than the Hope Tech 4 V4!
If you've got the Park Tool HMR4 then you'll know exactly how useful the hammer is in the workshop. If the persuader is one of your favourite tools then having a spare head is always going to be a good alternative to buying a new hammer, just replace the important bit and get back in the workshop with a rejuvenated feel.
Commuter essential Lightweight breathable 2.5-Layer Waterproof fabric in a fully seam sealed construction Full length storm flap inside front zip Zipped chest pocket Elasticated cuffs and hem with bonded sections for a clean fit Small pack size stuff sack included Reflective trim Construction Polyester 100% Technical aspects Waterproofness: 10000 Breathability: 10000
dhb Aeron Packable JacketStash the dhb Aeron Packable Jacket in your jersey pocket to ensure cold winds don't put a chill into your training. This super lightweight outer layer is extremely wind-resistant and highly breathable, ensuring maximum comfort.The dhb Aeron Packable Jacket is a lightweight performance jacket which is perfect for those dry, cool days when you fancy a little extra protection from the elements.The two-way zip offers extra ventilation when the road – or temperature – rises. And when the sun does come out, this jacket packs down super small to fit comfortably inside your jersey pocket. The collar has a soft and high-wicking tricot lining, while reflective inserts in the shoulders and reflective logos, ensure great visibility when the light fades. The rear hem is finished with a silicone gripper to prevent this jacket from riding up. dhb’s Aeron collection The Aeron collection is dhb’s most extensive range of performance products, engineered to protect athletes in all conditions and keep them riding at optimal body temperature. Aeron products are built to last, using the best technical fabrics and incorporating tried-and-tested construction teFeatures:Materials: Main: 100% Nylon; Back: 95% Polyester, 5% ElastaneSuper-lightweight performance jacketEasily packs into a jersey pocketMesh panels on back and under armsTwo-way VISLON® zipHigh collar with tricot liningReflective detailsSilicone gripperBuy dhb Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Giro Privateer Lace Off-Road ShoesTaking their brilliant Privateer MTB shoes and adding their Empire lace closure design, Giro have created the perfectly stylish and high-performance Giro Privateer Lace Off-Road Shoes for the discerning dirt rider.The Privateer has always proved wildly popular amongst XC mountain bike riders, cyclocross racers and gravel grinders, and it now gets treated to a lace-up design for those of you who love the fuss-free and lightweight performance of laces. The Privateer Lace Off-Road Shoes pair the classic design with a high-quality microfibre upper that hugs the foot snugly and comfortably providing awesome stability when pedalling. Rockprint heel and rubber toe guards enhance their durability and easily take on the inevitable knocks of dirt-riding without flinching. Next comes the co-moulded nylon and rubber outsole. This sole unit provides the perfect level of stiffness for efficient pedalling on the bike and unshakeable grip when you're on your feet and scrambling over unrideable trail features. The Privateer Lace Off-Road Shoes have all the features you need to go exploring by mountain or gravel bike.Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Also suitable for indoor trainers in gyms etc.Features:High-quality, breathable microfiber upperLaced closureRockprint toe and heel for abrasion resistance and durabilityReinforced rubber toe capTubular laces are durable and hold a knotCo-moulded nylon and rubber high-traction lugged outsoleMid-foot scuff guardAccommodates steel toe spikesMoulded EVA footbed with medium arch support355 grams (size 42)2-bolt cleat compatibleBuy Giro Cycling from Chain Reaction Cycles, the World's Largest Online Bike Store.
The E-Sommet 297 VRS features a strong, stiff and lightweight aluminium frame equipped with an integrated Shimano STEPS electronic motor drive, a Shimano SLX 12-Speed groupset and a long-travel RockShox Zeb and Super Deluxe suspension. Engineered and optimised to offer exceptional comfort, control and efficiency, this bike quickly shifts through its gear range, provides a pedal-assisted boost when you need it and has powerful hydraulic disc brakes to control your momentum. It also rolls upon a mixed-wheel platform (29" front / 27.5" rear) for the perfect balance of high-speed control and agility. And Vitus has equipped it with Tubeless Ready Nukeproof Neutron V2 wheels wrapped in high-grip Maxxis Tyres. The Vitus E-Sommet VRS Mountain Bike has all the trail-shredding performance and longer travel of a big-hitting 170mm Enduro bike, with a Shimano motor under the hood that kills the climbs and extends access to the most technical tracks. Long-Travel Full-Suspension Enduro Race E-Bike Experience the rush - the brief snapshots that flood your senses and place you deep in the zone. The feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last run. The rush that pushes you to explore your limits without overstepping the mark. Miss the last uplift? Doesn’t matter. The smooth EP8 drive unit will soon have you back at the trailhead. This is for the full-face thrill-seekers and the diehards. This is why you do it. Shimano STEPS Motor Drive and SLX 12-Speed Groupset The E-Sommet VRS has been developed to run a mullet wheel setup. A 27.5” rear wheel gives you more clearance over the back for steep ground and is more responsive through tight corners, while a 29” wheel at the front eats up rocky terrain and keeps momentum high. You’re getting the versatility of both wheel sizes in one bike. The stability of the full aluminium frame with a seamlessly integrated battery is rock solid, so you won’t be taking just any line, this is a bike for taking the best line. This is a bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. The powerful STEPS system, with a punchy E8036 630wh internal battery, keeps you fresh on the climbs so you can go all-in on the descents. The E-Sommet VRS is a bike that you sit within, not perch on top. It’s a powerful rider position that puts you firmly in control. Eagerly build your confidence on the refined berms and manicured features of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of naturally technical ground. Whether threading the needle through the challenging terrain of your favourite forest trails or dropping in on the lively descents of an e-Enduro, speed and traction come easily to the E-Sommet. It thrives in the chaos of steep and challenging trails. Bringing calm where all around there is frenzy. Please Note: This E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mph Key Features: E-Sommet Electric Enduro Platform: Internal battery frame design with new Shimano EP800 drive unit, improved suspension kinematics and updated geometry Frame Material: 6061-T6 Aluminium Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 167mm Rear Intended Use: Enduro RockShox Zeb Select and Super Deluxe Select R suspension Efficient Shimano STEPS EP8 motor with 630Wh internal battery Shimano SLX 1x12 speed drivetrain Powerful Shimano SLX 4 piston hydraulic disc brakes Nukeproof Neutron V2 Tubeless Ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and High Roller II tyres Features: Frame: E-Sommet 6061-T6 Double Butted Alloy, Internal cable routing, post mount disc brake mounts, Boost hub spacing - 148mm x 12mm thru-axle, Shimano STEPS compatible. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: RockShox Super Deluxe Select R, DebonAir, 205mm x 65mm, trunnion Fork: RockShox Zeb Select 29", 170mm travel, Charger RC damper, DebonAir, 38mm stanchions, 110mm x 15mm Maxle Stealth axle, 44mm offset Headset: Acros AZX-589, ZS56/28.6 upper and ZS66/40 lower to suit 1-1/8" upper tapered to 1.8" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 780mm Wide, 12mm Rise, L and XL: 800mm Wide, 25mm Rise Stem: Nukeproof Neutron AM, 6061 Alloy, 45mm length, 31.8mm Handlebar Clamp Diameter, 0° Rise Grips: Vitus Lock On Wheelset: Nukeproof Neutron V2 Wheelset, 29" Front, 27.5" Rear, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: Nukeproof Neutron V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: Nukeproof Neutron V2, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Neutron V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Nukeproof Neutron V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.5" WT, 3C MaxxGrip compound, DD casing R/tyre: Maxxis High Roller II, 27.5" x 2.5" WT, 3C MaxxTerra compound, DD casing Chain: Shimano SLX M7100, 12 Speed, 118 Links Crankset: Shimano EM600, 34T Narrow Wide Chainring, 165mm Crank Length, 53mm Chain Line F/brake Set: Shimano SLX M7120, Post Mount, Four Piston Caliper, Sintered Pads R/brake Set: Shimano SLX M7120, Post Mount, Four Piston Caliper, Sintered Pads Rotors: Shimano RT66 or Brakco DR-02, 203mm Front and Rear, 6 Bolt Hub Fitment R/derailleur: Shimano SLX M7100, 12 Speed, Shadow Plus, Long Cage R/shifter: Shimano SLX M7100, 12 Speed, Rapidfire Plus Freewheel: Shimano SLX M7100, 12 Speed, 10-51T Range Saddle: Nukeproof Trail Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 34.9mm Diameter Battery: Shimano E8036, 630Wh, Downtube Integrated Cycle Computer: Shimano EM800, Boost, Trail, Eco, Off and Walk modes Assist Switch: Shimano EM800, Mounted on left Drive Unit: Shimano STEPS EP8, Power Output 250W, Max Torque 85Nm Weight: Medium: 24.3kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Keys check. wallet check. energy bars check. hydration bladder check. The Outpost frame bag is the perfect companion for your all day pleasure ride or your week-long adventure ride. An expandable bottom compartment accommodates more mission critical gear.Expands to fit a wide variety of frames and sizesSimple to install and removeHighly water resistantInterior organization and exterior slip pocketsIncludes hydration tube port
The Xpresso 4 is built for everyday use and features a stainless steel top plate and a hollow, steel axle. A low stack height, an oversized pedal platform, and a carbon blade with three tension settings make this a very comfortable and efficient pedal. The Iclic system requires only a light step to clip-in, making it a very easy pedal to enter.Great value for proven performanceFast and easy cleat engagementLow stack height for clearanceCleats included with all pedal purchasesSpecification:Axle component: Steel axleBearings: SteelBody component: Glass-filled and Stainless steel plateCleats: ICLICPedal stack height: 13.5mmAngular freedom: +5° to -5° with free foot cleats, 0° with fixed foot cleatsContact surface area: 700 mm2Distance pedal spindle / crank arm: 63mmLateral freedom: 2.5 mm with free foot cleats, 0 with the fixed foot cleatsRelease angle: 2.5 mm with free foot cleats, 0 with the fixed foot cleatsTension: 3 different settings of carbon bladeThreading: 9/16 - 20 inchWeight (per pedal): 115gColour (Pedal): BlackAccessories: ICLIC free foot cleatsIntended use: RoadPower Measurement: Not CompatiblePart Weight (g): 115
Classic D+ Sports BraWith a classic bra design and a modern rounded silhouette. Shockabsorber's Classic D+ Sports bra is a more traditional sporting choice. Adjustable straps and optimal fit allow the bra to be completely personaliable, ensuring the optimum fit.Features:Material: 52% Polyamide (Nylon), 44% Polyester, 4% Elastane (SpandexShaped, adjustable, padded straps for comfortNon-rub, padded hook and eye - great for mat workMade from moisture-wicking, breathable, high performing fabricsBuy Shock Absorber Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Selle Italia WATT Kit Carbonio Superflow SaddleDesigned for intense triathlon use, this saddle features a revised shape with a wider nose for high performance and superior comfort. Coming equipped with a Fibra-Tek cover construction, this model is more than capable of handling the increased pressures that triathletes are met with including multiple changes to their riding position. Selle Italia has kitted it out with carbon rails, so you can benefit from its increased strength without having to worry about adding unnecessary weight to your ride.Features: Cover Material: Fibra-Tek Padding Material: Comfortable Material of Rails: Carbon Keramic Type of Riding: Road, Triathlon Rail Size: 7x9mm Dimensions: 133x250mm Stiffness/Flex: Performance Weight: 200gTechnologies: Revised Shape and Wider Nose: The new Watt seat - more backward and anatomical - allows the triathlete to avoid possible friction during the push phase and, combined with an enlarged nose (50mm), to benefit from greater comfort without altering performance. Longer Rails (+10mm): The Watt has 10mm longer rails to allow a greater possibility of adapting the saddle to extreme aerodynamic positions and therefore to increase the feeling of comfort. Anti-Slip Cover: The inserts in highly “gripping” material placed on the cover - near the central hole “Superflow” - allow to ensure great stability and maximum pedaling efficiency.Buy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The LifeLine Pro Shimano Bottom Bracket Wrench is designed for the installation and removal of Shimano & Campagnolo hollowtech II, Truvativ GXP & FSA external bottom brackets. The ergonomic handle ensures comfortable use with plenty of leverage.Compatible with; Shimano & Campagnolo hollowtech II, Truvativ, GXP & FSAComes with crank installation tool for use with Shimano & Truvativ