RockShox Lyrik Ultimate Boost ForkThe Lyrik Ultimate Boost Fork from RockShox is designed not only for the race down but the ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with a Charger 2.1 damper.Engineered to provide unmatched trail control and precision, the Lyrik Ultimate features ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance from sunup to sundown.Bottomless Tokens Bottomless Tokens allow you to easily custom tune your air-spring performance to best match your riding style and suspension preference. Adding the easy-to-install Bottomless Tokens changes the air-spring curve to resist bottom-out after a big hit, giving aggressive riders the power to attack the trail harder. Removing Bottomless Tokens makes the air-spring curve more linear, enhancing suspension feel for certain types of terrain or trail conditions and ensuring riders who are less front-end aggressive benefit from 100% of their fork's travel. DebonAir Spring A lightweight, highly tune-able air spring designed to offer a coil-like consistent feel throughout the travel - effortlessly soaking up the smallest hits and tracking the slightest changes in the terrain. Easy Adjustable Fork Setup Measurement gradients indicating the current sag and travel settings are conveniently located on the upper tubes so that you always know how much travel you are running. You won't find this anywhere else but RockShox. BOOST Hub / Axle Spacing BOOST is the standard wheel and drivetrain specification that opens the opportunity for improved frame geometry with shorter chainstays, wider and stiffer suspension pivots, a wider range of chainring options, as well as more clearance for bigger tires and wider, stiffer wheels. Charger 2.1 RC Damper Completely re-designed to reduce hand fatigue and fight unwanted friction, the new Charger 2.1 increases confidence and control over every trail. Maxima Plush Suspension Fluid Developed with the world's fastest racers, on the world's toughest circuits. Maxima Plush Fluid is designed to protect from suspension wear, reduce friction, and silence damper noise while maintaining a consistent feel in all temperatures. SKF Suspension Seals Everyone loves a good collaboration, which is why we've been working with SKF, the world's highest-performance seal manufacturer, for over 5 years. Together we'll provide ultra-low friction wiper seals, less fatigue, and unmatched suspension feel, all while keeping the dirt where it belongs- because no one wants dirt in there. Please Note: The images on this webpage are for reference only and the decals come supplied in the box for you to fit yourself when you receive the forks. Features: Updated highly-tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail Charger 2.1 RC2 damper featuring independent high and low-speed compression adjust Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel Maxima Plush damping fluid reduces friction and silences damper noise Damper Type: Charger 2.1 RC2 Fork offset: 37mm (27.5"), 42mm (29"), 46mm (27.5"), 51mm (29") Axle: 15x110mm BOOST Upper Tube Type: 35mm tapered wall Aluminium Volume Reducer: 0/4 Tokens, 1/4 Tokens, 2/5 Tokens Spring: DebonAir Crown OD (mm): 59 Weight: 1976 - 2040g (approx.)Buy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Climbing has evolved. The DBair CS takes the DBair the world has come to love and adds a selectable climbing mode to specifically address the demands of ascending on the bike. However CS is not your conventional pedal-platform as it adjusts both Low Speed Compression (LSC) and Low Speed Rebound (LSR). By selectively tuning both compression and extension phases when climbing, the shock maintains better traction and control while enhancing pedaling efficiency through the shock's entire travel. Weight: 509g (weight varies by size) , Finish: Anodized and laser-etched,Damping: Twin-tube independent compression and rebound.Adjustments4-way independent adjustment : Air spring rate,High speed compression,Low speed compression,High speed rebound,Low speed rebound.Mounting Interface: Norglide® bushing 1/2" Universal Axle,Air Volume: The DBair CS is available with a standard air can or XV (Extra Volume) air can. ,The XV can offers a higher air volume and is perfectly suited to bikes with a significantly progressive leverage ratio, such as Intense and Santa Cruz. These bikes require a more linear air spring. The less progressive air spring allows the rider to ride with more High Speed Compression while still achieving full travel. ,XV cans are also available separately for retro fitting on existing DBair dampers. .Note - Pricing is for damper only. Hardware supplied separately.
Fit Series 22 BMX BikeThe Fit Series 22 is a monster truck of a freestyle bike that features a full Chromoly (CrMo) frame and a combination of aftermarket components from Fit and S&M. This BMX bike is ideal for riding skateparks, street spots and dirt jump trails, and its larger TT length is suited to taller riders and for those who prefer more room to manoeuvre around the bike.Combing sleek looks with bold looking components, this ride handles like a dream thanks to the low offset forks and S&M Speedball tyres. Plus, there is a tubular CrMo crankset that spins inside a sealed Mid-type bottom bracket, ensuring none of your pedalling effort is wasted as you crank up to speed. Features: Frame: 22.125” Tt 100% Chromoly Geometry: 22 Headset: Integrated BB: Sealed MID Bars: 2-piece 9”x29” Fork: Tapered with 33mm Offset Stem: Fit Top Load Grips: Fit Lontech with flange Seat: S&M Stealth Pivotal Cranks: Tubular Chromoly 175mm Sprocket: Fit Tri Aluminium 25t Pedals: Fit Mack Alloy Front Wheel: Fit Oem Double Wall with sealed Female Axle Rear Wheel: Fit Oem Double Wall with sealed 9t Cassette Tyres: S&M Speedball 2.4” (F) 2.25” (R) Brakes: New U-brake with more Tyre Clearance And Softer Pull Springs Misc: S&M 320mm Long Johnson Post with qr Seat ClampPlease note: this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).Buy Fit BMX from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Scicon Aerotech Evolution X TSA Bike case is lightweight, robust, reliable and easy to travel with. Thanks to the patented ABS-composite constructed outer shell, this bike case protects your bike from the worst knocks, bumps and abrasions imaginable. Equipped with padded inserts inside the case, the Scicon Aerotech Evolution X TSA bike case also prevents damage caused by internal rattling. With a suspended frame system and a series of heavy-duty buckles, this bike case provides incredible stability throughout your journey. Despite providing such robust protection, this case weighs just 11 kilograms making transportation as straightforward as possible. By only requiring the removal of your seat post, wheels and one pedal, packing your bike is a breeze. Employing two sturdy TSA locks, this case keeps your contents secure and offers complete peace of mind when travelling. Thankfully, it’s compatible with both quick releases and thru-axles, as well as a range of bike sizes, making it ideal for both road riders and mountain bikers. Resting upon four reliable wheels which contain precision ball bearings and rotate 360-degrees, the Scicon Aerotech Evolution X TSA bike case effortlessly rolls over a variety of surfaces - from uneven pathways that lead up to your hotel, to the smooth floors of an airport departure lounge. Patented ABS composite hardshell construction Internal padding for added protection Internal suspended frame system for added stability Only requires the removal of your wheels, seat post, and one pedal Dedicated wheel compartments Weighs 11 kilograms/24lbs Secured with two heavy-duty locks Accepts both bikes with thru-axles and quick releases. Four wheels which rotate 360-degrees allow easy rolling over any surface.
The Bricktown LTD features a strong and lightweight steel frame that is equipped it with a Shimano Nexus 7-Speed internal gear hub, powerful V-brakes and high-grip Veerubber City tyres. It is also adorned with a dynamo-powered front light, rear LED light and a front cargo carrier rack. The Bricktown LTD model from Ortler offers a modern spin on a classic vintage model. It features a slender look with the strikingly large front luggage rack which harks back to a style reminiscent of the middle of the last century. At that time, the so-called 'Porteur' bicycles features a sturdy front luggage rack, a necessity in an era where not every household had access to a car. With the Bricktown LTD, Ortler revives this concept again. This practical and elegant bicycle will appeal to urban cyclists who require a vehicle that can confidently and comfortably transport them through the city. The bike features a comfortable saddle seat, 7 gears and modern components. Bags, backpacks and groceries can be safely transported on the luggage rack, in full view of the rider. With its attractive looks and practical features, the Ortler Bricktown LTD is the obvious choice for urban riders. Additional Features: Pedals: Marwi SP-687 Luggage Rack: Ortler front carrier, Hi-Ten steel Stand: Central stand Mudguards: Aluminium Front Light: Shimano DHC3003, 6V 3.0W, Hub dynamo Rear Light: Büchel Retro Sport LED Chrome Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Designed to exceed the demands of Fox Suspension's Factory-level riders, this Factory Series mountain bike (MTB) rear shock is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish that complements any ride. EVOL Air Spring and Adjustments The Float DPS helps you make perfect turns without cutting corners by using a dual-piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel. The Fox Suspension Float DPS Factory Remote Shock's lightweight chassis, EVOL air spring, and dual-piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-509 Black 6.5x1.5" 972-01-512 Black 7.25x1.75" 972-01-508 Black 7.5x2.0"
The Bricktown LTD Trapeze features a strong and lightweight steel frame with trapeze geometry for reliability and easy access for convenient mounting on and off the bike. Ortler has also equipped it with a Shimano Nexus 7-Speed internal gear hub, powerful V-brakes and high-grip Veerubber City tyres. It is also adorned with a dynamo-powered front light, rear LED light and a front cargo carrier rack. The Bricktown LTD model from Ortler offers a modern spin on a classic vintage model. It features a slender look with the strikingly large front luggage rack which harks back to a style reminiscent of the middle of the last century. At that time, the so-called 'Porteur' bicycles features a sturdy front luggage rack, a necessity in an era where not every household had access to a car. With the Bricktown LTD, Ortler revives this concept again. This practical and elegant bicycle will appeal to urban cyclists who require a vehicle that can confidently and comfortably transport them through the city. The bike features a comfortable saddle seat, 7 gears and modern components. Bags, backpacks and groceries can be safely transported on the luggage rack, in full view of the rider. With its attractive looks and practical features, the Ortler Bricktown LTD is the obvious choice for urban riders. Additional Features: Pedals: Marwi SP-687 Luggage Rack: Ortler front carrier, Hi-Ten steel Stand: Central stand Mudguards: Aluminium Front Light: Shimano DHC3003, 6V 3.0W, Hub dynamo Rear Light: Büchel Retro Sport LED Chrome Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Token Dhuezz is an alloy clincher wheelset crafted to be unconventional. The ceramic layer which entirely covers the rim inclcuding the braking surfave is not only for aesthetics, but also for extreme durability and for improved brake performance. Built on Token's Z1 hubs and differential front and rear aero spokes for optimal stiffness and weight, Dhuezz is the ultimate alloy wheelset for mountains. Rims Rim: Alloy AL+ , Clincher, Tubeless Ready Brake Surface: Alloy, Cermaic Coating Depth: 22mm Width: 22mm Hubs Front Axle: Quick Release, Z1 Rear Axle: Quick Release, Z1 Freehub: Sram/Shimano Bearings: Premium Spokes Spokes: Sapim CX-RAY Straight Count: 18 Front / 21 Rear Other Weight: 1396g per pair Includes: Skewers
The right wheel and tire combination can improve your skills and upgrade the performance of your E-bike on challenging off-road terrain. The new E-Deemax S is built specifically for E-bikes and has some unique technologies to help you ride smoother and have more fun on the trail.Our patented PFP technology (Pinch Flat Protection) features rims with a wider contact surface at the top of sidewall, which significantly reduces the risk of tire cuts and punctures. The wider 35mm rims allow you to run lower tire pressure for better traction, and the rims pair perfectly with trail tires ranging from 2.6 to 3.2-inch. Our patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape, making it the easiest system for mounting and changing tubeless tires.ISM machining removes material from the rims in strategic areas to minimize weight without compromising strength, and our new Black Shield finish protects the rims against impacts and scratches. We use 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub, which has our ultra-reliable ID360 double ratchet system for quick engagement and acceleration. Set up for either 6-bolt or center lock disc mounts, these 29” wheels are available for Shimano HG9, XD and Micro Spline freewheel bodies and come with UST tubeless valves, spare spokes and accessories.KEY BENEFITSReduced risk of flats on rugged trailsPFP (Pinch Flat Protection) rim sidewalls have a wider contact surface at the top of sidewall, which significantly minimizes the risk of tire cuts and punctures. Super strong rim (ASTM 5) gives you the confidence to push your limits on rough terrain.Purpose-built for off-road E-bikesWider 30mm (internal) rim adds stiffness and cornering precision. Engineered for the added torque of E-bike motors with 28 threaded three-cross spokes that further boost lateral stiffness.Most user-friendly tubeless systemFully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and the durability of the rim.
With a shallow-depth aero profile and lively acceleration, the Shimano Ultegra R8170 C36 wheelset is a climber's delight that delivers performance every road rider will appreciate. With the speed and efficiency of tubeless tyres, the everyday performance of a shallow, aero profile carbon rim, and the convenience of 11 and 12-speed compatibility, the new Ultegra R8170 C36 wheels are an upgrade for any road bike.WH-R8170 TL carbon clincher disc brake designed to meet pro road race criteriaLightweight clincher full carbon 36 mm deep rim for improved aerodynamics, increased rigidity and excellent inertia for sprinters and TT specialistsEasy to use Centre Lock rotor mount for use with disc brakesStainless steel butted (2.0-1.8-2.0) and bladed straight pull spokes for optimal balance and rigidityElbow-less spokes make for a strong yet compliant wheelHigh lateral rigidity is produced with a wide flange spacingLabyrinth double-contact sealing effectively shuts out water and dirtAlloy cone with integrated steel Borozon treated bearing races - super mirror finish reduces frictionCold forged, machined aluminium hub shell and oversized 7075 alloy axle keep the wheel weight to a minimumFor 100 x 12 mm axle700C clincher compatible
Equipped with a Shimano drive train including a Shimano Acera 48/38/28 chain set up front and an 8-speed cassette at the rear the Velocity offers the perfect all-round gearing you require for taking on the urban jungle. Built around a confidence inspiring 6061 heat treated aluminium frame offering a comfortable riding position and is finished with Schwalbe K-Guard tyres to keep you planted to the road in all weathers as well as powerful Shimano V-Brakes to ensure you can stop in plenty of time
This mountain bike (MTB) rear shock features a lightweight EVOL air spring, which offers fantastic responsiveness and sensitivity as you charge through the more demanding of terrain conditions. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails. Factory Series MTB Rear Shock with DPS Damper Ready for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain. Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-497 Black 6.5 x 1.5" 972-01-498 Black 7.25 x 1.75" 972-01-477 Black 7.875 x 2.0"