Hand built by Malcolm Borg the BORG31 wheelset is a semi aero, very stiff wheelset based on a wide rim which is perfect for all weather training use, road racing or CX use.A robust all weather race orientated wheelset24mm wide and 31mm deep tubeless ready rims (also compatible with tubes)20 spoke front and 24 spoke rearMiche Primato hubs for reliabilityLife of the rim warrantyWeight (1655g (approx)The BORG31 has been built around a 24mm wide and 31mm deep Kinlin rim with an internal width of 19mm. The rear rim is offset (asymmetric) which increases non drive spoke tension, which is a useful way of increasing spoke life. The rims are tubeless ready and come with tubeless tape, valves and IRC tyre levers. The rims have been built with 20 black Sapim CX-ray spokes at the front and 24 black Sapim CX-force spokes at the rear with black alloy SILS (self locking nipples). The Cx-force spokes have a thicker elbow than most spokes (triple butted) this means longer spoke life.To ensure the best value, performance and durability the BORG22 wheels use Miche Primato hubs. The bearings are 2x6001 C3 in both the front and rear hub shells. The rear freehub has 2x 6901 bearings. The axles front and rear are 12mm diameter and made of steel. The front and rear hub are a free axle design making disassembly really simple. Both the front and rear hub have a bearing preload adjuster which should be set once the wheels are installed in the bike. Simply a reliable wheelset for all weathers and combined with the right tyre it could be the only wheelset you need.Whats included:Wheelset front and rear with Sapim CX- ray and CX-Force aero spokesTubeless rim tapeBlack alloy tubeless valvesQR skewers for Miche and Shimano hubsThe best guarantee (for the life of the rim against spoke failure and anything that could be termed a defect)
Ranging from 10 to 42-tooth, the 11-speed X-Dome delivers an incredibly wide gear range while maintaining even, optimized steps. The single-unit cassette combines with the XD Driver Body for a superior connection to the wheel.Weight: 268gMaterial: 4130 Chromoly Steel (cog cluster), AL-7075-T6 (largest cog)Speeds: 11-SpeedRecommended Chain: PC-XX1Recommended Group: SRAM XX1Cogs: 10-12-14-16-18-21-24-28-32-36-42Compatibility: XD Driver Body
The Shimano RS500-TL Clincher Road Wheelset gives you proven technology based on the top of the range Dura-Ace models, providing fantastic value for money.Labyrinth and contact sealing - low-friction seals effectively shut out water, mud and dirt without affecting rotational smoothnessQuick and easy to maintain digital click bearing adjustmentSuper polished ball races for high precision, durability, and smooth rotation8,9, 10 and 11-speed compatible/ 700C Clincher rim onlyBuilt with stainless steel bladed and butted spokesThe rear wheel uses a special wide flange hub design and an asymmetrical rim that results in additional stiffness and stability. The Hub uses angular contact bearings designed to cradle the balls giving both radial and lateral support for superior strength and durability in real world riding conditions. They also offer precision bearing adjustment and easy maintenance. The Labyrinth and contact sealing low-friction seals effectively shut out water, mud and dirt without affecting rotational smoothness.
The name E-Deemax has become a reference for E-Bike riders this new E-Deemax 35 lives up to its name with many of the same features and technologies as higher range model but at a far more attainable price. One of the key factors is our Pinch Flat Protection technology a rim design with a wider contact surface at the top of sidewall which significantly reduces the risk of tire cuts and punctures. The rim is welded for added reliability and features a 35mm internal width with a Tubeless Ready compatibility to allow you to run lower tire pressure for better traction and control. As all our E-Deemax wheelsets this new option is lab and field validated for a max total weight of 180Kg.Our Instant Drive 360 freewheel with a double ratchet system equips the rear hub and provide fast engagement and top-level reliability.The rear hub is compatible with Shimano HG9 Micro Spline and SRAM XD driver bodies. The E-Deemax 35 is available with 6-bolt or center lock brake rotors in 27” only and is compatible with a 15x110 front axle and 12x148 rear. The wheel is delivered with valves replacement spokes and accessories. Key benefits Strong and durable Welded rim with Pinch Flat Protection for : Less risk of flat A super strong rim profile A perfectly sealed rim profile E-Bike specific and reliable construction 28 wide double butted spokes Super reliable ID360 double ratchet freewheel system Bigger flange diameter hubs Tubeless ready technology A tubeless rim profile with tubeless tape make it easy to ride tubeless tires for more traction and less risk of flat Specifications DELIVERED WITH UST valve and accessories Pre-installed tubeless rim tape Replacement spokes (2 with the front wheel and 4 with the rear) Rims Tire: UST Tubeless and tubetype SUP Drilling: traditional Internal width: 35 mm E-Bike specific rim profile ETRTO size 27.5': 584x35TC Pinch Flat Protection sidewall (minimizes the risk of tire cuts and punctures) Asymmetrical rim design Spokes Lacing: front and rear crossed 3 Shape: straight pull flat Count: 28 front and rear Hubs Instant Drive 360 QRM Auto Hub available with 6-bolt or center lock (R) brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT Recommended tyre sizes: 60mm to 76mm (2.35' to 3.0') For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg E-bike included Versions Disc standard : 6 Bolts or Center Lock (R) Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatible Adapters and freewheel bodies Boost : Torque Caps ([LV2374400]) Boost 20mm : 20x110 boost front hub cap ([V2680401] - Not Delivered with the wheel only compatible with INT6bolts hub)
The name E-Deemax has become a reference for E-Bike riders this new E-Deemax 30 lives up to its name with many of the same features and technologies as higher range model but at a far more attainable price. One of the key factors is our Pinch Flat Protection technology a rim design with a wider contact surface at the top of sidewall which significantly reduces the risk of tire cuts and punctures. The rim is welded for added reliability and features a 30mm internal width with a Tubeless Ready compatibility to allow you to run lower tire pressure for better traction and control. As all our E-Deemax wheelsets this new option is lab and field validated for a max total weight of 180Kg.Our Instant Drive 360 freewheel with a double ratchet system equips the rear hub and provide fast engagement and top-level reliability.The rear hub is compatible with Shimano HG9 Micro Spline and SRAM XD driver bodies. The E-Deemax 30 is available with 6-bolt or center lock brake rotors in 29” only and is compatible with a 15x110 front axle and 12x148 rear. The wheel is delivered with valves replacement spokes and accessories. Key benefits Strong and durable Welded rim with Pinch Flat Protection for : Less risk of flat A super strong rim profile A perfectly sealed rim profile E-Bike specific and reliable construction 28 wide double butted spokes Super reliable ID360 double ratchet freewheel system Hubs inspired by downhill practises Tubeless ready technology A tubeless rim profile with tubeless tape make it easy to ride tubeless tires for more traction and less risk of flat Specifications DELIVERED WITH UST valve and accessories Pre-installed tubeless rim tape Replacement spokes (2 with the front wheel and 4 with the rear) Rims Tire: UST Tubeless and tubetype SUP Drilling: traditional E-Bike specific rim profile ETRTO size 29': 622x30TC Pinch Flat Protection sidewall (minimizes the risk of tire cuts and punctures) Asymmetrical rim design Spokes Lacing: front and rear crossed 3 Shape: straight pull flat Count: 28 front and rear Hubs Instant Drive 360 QRM Auto Hub available with 6-bolt or center lock (R) brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT Recommended tyre sizes: 60mm to 76mm (2.35' to 3.0') For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg E-bike included Versions Disc standard : 6 Bolts or Center Lock (R) Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatible Adapters and freewheel bodies Boost : Torque Caps ([LV2374400]) Boost 20mm : 20x110 boost front hub cap ([V2680401] - Not Delivered with the wheel only compatible with INT6bolts hub)
Fox Suspension Float DPS Performance SV Rear MTB ShockFeaturing a hard-wearing anodised finish, this Performance Series mountain bike (MTB) rear shock offers fantastic durability and corrosion resistance as you conquer your local trails in all-weather conditions. This model is also equipped with a lightweight one-piece EVOL air spring, which ensures you'll benefit from its improved responsiveness and sensitivity as it absorbs the sudden knocks and bumps associated with trail-riding.DPS Damper and AdjustmentsThis trail-ready rear shock is kitted out with a dual piston system (DPS) damper that pairs exceptional bump compliance with efficiency, helping you conserve energy for when you need it most. Its damper uses a three position lever to allow you to easily switch between its open, medium and firm modes. Fox Suspension has also equipped this model with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, so you can fine-tune your rear suspension to fit in with your riding style as well as the terrain conditions.Features: Finish: Anodised Use: MTB Spring Type: EVOL Air Spring Damper Type: DPS damper with three positions (Open, Medium and Firm modes) Lever Actuated: Yes Remote Actuated: No Valve Design: Dual piston Adjustments: Lever actuated Open, Medium and Firm modes, Open mode adjust tuning range (1, 2, 3), rebound and air spring pressureTechnologies: DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
WH-R9170 TL carbon clincher disc brake wheel, designed to meet pro road race criteria. Key Features: Lightweight clincher full carbon 40 mm deep 24 mm wide rim for improved aerodynamics, increased rigidity and excellent inertia Easy to use Centre-Lock rotor mount for use with disc brakes 24 stainless steel butted (2.0-1.8-2.0) and bladed straight pull spokes Elbow-less spokes make for a strong yet compliant wheel High lateral rigidity is produced with a wide flange spacing Labyrinth double-contact sealing effectively shuts out water and dirt Alloy cone with integrated steel Borozon treated bearing races - super mirror finish reduces friction Quick and easy to maintain bearing adjustment Cold forged, machined aluminium hub shell and oversized 7075 alloy axle keep the wheel weight to a minimum 700C clincher (tubeless compatible), 23 - 32C For 100 x 12 mm axle Average weight 707 grams
This mountain bike (MTB) rear shock is part of Fox Suspension's Performance Series and features a hard-wearing anodised finish for excellent durability and corrosion resistance on your ride. This model is also equipped with a lightweight one-piece EVOL air spring, which ensures you'll benefit from its improved responsiveness and sensitivity as it absorbs the sudden knocks and bumps associated with trail-riding. DPS Damper and Adjustments This trail-ready rear shock is kitted out with a dual-piston system (DPS) damper that pairs exceptional bump compliance with efficiency, helping you conserve energy for when you need it most. Its damper uses a three-position lever to allow you to easily switch between its open, medium and firm modes. Fox Suspension has also equipped this model with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, so you can fine-tune your rear suspension to fit in with your riding style as well as the terrain conditions. Technologies: DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-489 Black 7.5x2.0" 972-01-490 Black 7.875x2.0" 972-01-491 Black 7.875x2.25"
The Aqua Marina Fusion All-Around SUP 10’10” Paddle Board Package, is as the title suggests, an ideal all-round SUP paddle board kit that includes everything you need to get started on your water adventures. The Fusion paddle board itself offers stability and a good gliding experience, as well as being highly competent on both flat water and small waves, plus it comes with a generous volume and payload that caters to those looking for an easier ride and in need of a higher carrying capacity. Constructed with Drop Stitch Light Technology, the Fusion is also lightweight and very rigid, and features a comfortable diamond grooving footpad for extra grip. Additionally, a neoprene carry handle makes light work of carrying it to and from the water, and a rubber patched valve ensures optimum airtightness, especially in harsh conditions, so you do not deflate when out exploring. To finish the package, you can rely on a Double Action Liquid AIR V1 Pump for quick and easy inflating, alongside a Sports III Paddle, removable slide-in Centre Fin and safety leash to ensure fuss-free water touring. Furthermore, all the kit fits into a zipped backpack, making this paddle board set easily portable for adventuring home and away. About Drop Stitch Light Technology High quality, durable construction with portable packing featuring a Double Wall Fabric drop stitch core, light and printed tarpaulin layer, first and second PVC rail layers and EVA footpad.
The PCS4 workstand is a great addition to any keen cyclist or mountain biker's workshop that folds away when you need the space to bring the car into the garage or build that canoe you have always wished for. The PCS-4 is a heavy duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock solid, four-point leg system that folds together for storage, steel powder coated tubing, and a composite horizontal tube.
Whether you're shredding with your friends after work or exploring new trail routes on your own, this high-quality fork is engineered for reliable performance. It features a durable 6000-series straight wall aluminium leg construction, which makes it ideal at handling the knocks and bumps that are associated with all-day epics in the mountains. Manitou has also equipped this model with a TS Air spring, Kwik Toggle compression damping as well as In-leg adjustable TPC rebound damping. This means that riders can set it up to perfectly match their riding style as well as the terrain conditions. Inspired by the brand's renowned Absolute+ technology, this version's Kwik Toggle compression damping also achieves on/off lockout simplicity in a lightweight, practical package. Item Top Features Continued: Max Tyre Size: 68mm (27.5") 77mm (27.5+), 68mm (29") Offset: 37mm(27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") Travel: Multiple options available to select E-Pac: No Manufacturer's Part Numbers: 191-36971-A002 Black 27.5" x 120mm travel 191-36971-A003 Black 27.5" x 100mm travel 191-36975-A002 Black 27.5+/29" x 120mm travel 191-36975-A003 Black 27.5+/29" x 100mm travel
Manitou Machete Mountain Bike Suspension ForkWhether you're exploring new trail routes on your own or shredding with your friends after work, this mountain bike (MTB) fork is engineered for dependable off-road performance. It features a durable 6000-series straight wall aluminium leg construction, which makes it ideal at handling the knocks and bumps that are associated with all-day epics in the mountains. Manitou has also equipped this model with a TS Air spring, Kwik Toggle compression damping as well as In-leg adjustable TPC rebound damping. This means that riders can set it up to perfectly match their riding style as well as the terrain conditions. Inspired by the brand's renowned Absolute+ technology, this version's Kwik Toggle compression damping also achieves on/off lockout simplicity in a lightweight, practical package.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Matte Axle: 15x110mm Hexlock Use: MTB Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: TS Air Compression Damping: Kwik Toggle Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, Lockout Brake Compatibility: Post Mount 160mm (203mm Max)Max Tyre Size: 68mm (27.5"); 77mm (27.5+) and 68mm (29")Offset: 37mm (27.5"); 44mm (27.5+/29")Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29")Travel: Multiple options available to selectE-Pac: No Weight: 1862g (27.5"); 1885g (27.5+/29")Manufacturer's Part Numbers: 191-36971-A002 Black 27.5" x 120mm travel 191-36971-A003 Black 27.5" x 100mm travel 191-36975-A002 Black 27.5+/29" x 120mm travel 191-36975-A003 Black 27.5+/29" x 100mm travelBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.