Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
SRAM G2 Ultimate Disc Brake SetFeaturing a carbon fibre lever blade, this trail-ready mountain bike (MTB) hydraulic disc brake offers the perfect balance of stiffness, durability and low weight performance on your ride. SRAM has also kitted out this version with an anodised finish for additional protection against wear and corrosion, making it ideal for all-weather and trail conditions. Another highlight is its steel-backed organic brake pads, which ensure dependable braking as you weave your way from trail to trail. Coming complete with a wide range of technologies, this is a great choice of upgrade for smooth and reliable braking performance wherever your next trail adventure leads you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. The brand obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. The brand's engineers sculpted the finest materials - titanium and carbon fibre - to make this its lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance - its test riders didn't dub it the "Mini-Code" for nothing.- More caliper stiffness and a revised pad compound with bite.- Pivot bearings for crisp lever feel and a fatigue-free ride.- SRAM's best power to weight ratio in a four-piston brake.Features: Lever Blade Material: Carbon Caliper Body Material: Aluminium Finish: Anodised Pad Type: Steel-backed Organic Use: Mountain Bike (MTB) Brake Type: Hydraulic Number of Pistons: 4 Caliper Mount Type: Direct mount DIR Recommended MMX Clamp (not included): Stainless bolt, blk clmp, Titanium bolt, blk clmp Rotor Compatibility: Front: 200mm; Rear: 180mm (rotors available separately) Single or Pair: Pair Weight: 238gTechnologies: Bleeding Edge: With this new caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It's a quick and easy way to customize the feel of your brakes without having to move the pads. It's also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds. SwingLink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That's great, but there's more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It's the perfect balance of power and precision. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Manufacturer's Part Numbers: 00.5020.458.230 2X Black 1550mm 00.5020.457.210 2X Black 1450mmBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DT Swiss H1700 Spline 30 Boost Disc Rear WheelReady for the extra demands of your toughest E-MTB rides, the tubeless ready DT Swiss H1700 Spline 30 Boost Disc Rear Wheel brings you extra strength and control for attacking the harshest terrains with confidence.An electric mountain bike (E-MTB) is designed to quickly ride up and down mountains and to provide fun. The H 1700 model is a high-end aluminium wheel that does precisely that. With several years of expertise in hybrid bicycle components and specific, demanding testing procedures, DT Swiss has redesigned this wheel to suit the extended use of e-mountain biking.The redesigned 350 hub features a bigger hub body, enabling better brake and drive torque resistance, resulting in better durability. The hub is now combined with a high-end welded aluminium rim and reinforced hybrid spokes. This mountain bike wheel is ready for anyone who wants to extend their eMTB adventure.Features: Rim Type: Clincher Rim Material: Aluminium Rim Width: Inner: 30mm; Outer: 35mm Brake Type: Disc brake (6-Bolt) Tubeless Compatible: Yes Hub Width: 12x148mm (Boost) Rim: Wheel size: 27.5" Rim depth: 20mm ETRTO: 30 - 622 For Presta valve (6.5mm diameter) Tubeless ready Suitable for tyre widths: 1.5" - 3.0" Spokes and nipples: Spoke type: DT Swiss hybrid 1 straightpull Number of spokes: 28 pcs each Lacing: 3-cross Nipples: DT Swiss ProLock Squorx ProHead aluminium Hub: 350, Spline, hybrid, 4 sealed cartridge bearings Steel freehub and aluminium body IS 6-bolt brake rotor mount Ratchet freewheel system, 24T (15° degree engagement) Axle: 12x148mm (BOOST thru axle) Cassette compatibility: SHIMANO 12-speed MICRO SPLINE MTB cassettes (& SHIMANO 11-speed WIDE FLANGE MICRO SPLINE MTB cassettes) Total Wheel Weight: Approx. 1177g ASTM classification: 4 (for extremely rough, blocked terrain with jumps/drops of up to 121cm) Max. system weight: 150kg (cyclist, bike, gear and luggage) In the box: 1x DT Swiss H 1700 Spline 30 Hybrid BOOST rear wheel SHIMANO MICRO SPLINE 1x DT Swiss tubeless-ready rim tape (pre-mounted) 1x DT Swiss tubeless valveBuy DT Swiss Wheels&Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Campagnolo Super Record 12 Speed Rear DerailleurThe 12-Speed Campagnolo Super Record Rear Derailleur is the heart and soul of the Super record 12-Speed drivetrain. Super Record components are designed for competitions and to provide the optimum performance required to win at the top level. This new model still provides professional racers with the certainty of fast and exceptionally accurate shifting, even under load. However, you don't have to be a professional to take advantage of Campagnolo's best performance features, the significant increase in shifting will be noticeable to any road cyclist.More Efficient, Better Power Transfer, Smoother ShiftingThe revised shape of the external components of the Super Record 12-Speed rear derailleur allows it to move efficiently to give maximum performance at any angle across any cassette ratio. The design of the cage keeps the chain closer to the cassette to ensure better power transfer, a more positive drive, whilst perfectly following the curve of the cassette sprockets. This better chain/sprocket interface also gives greater durability of components and is silent during use.Features: ULTRA-LIGHT main derailleur body Stiffer, less weight Optimised trajectory curve, improved shifting Close contact with each sprocket 3D-Embrace Technology Inner mechanism embraces more teeth per sprocket Greater shifting retention and efficiency Unique 72.5mm Cage, One Size Fits All (11-29 and 11-32T cassettes) Larger 12-Tooth pulley design, greater contact and cassette versatility Increased adjustability, durability and rider safety Massive performance increase and just 3 grams difference, compared to the previous model Weight: 181gBuy Campagnolo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This trail-ready MTB hydraulic disc brake comes equipped with a high-quality carbon fibre lever blade for the perfect balance of stiffness, durability and low weight performance on your ride. SRAM has also kitted out this version with an anodised finish for additional protection against wear and corrosion, making it ideal for all-weather and trail conditions. Another highlight is its steel-backed organic brake pads, which ensure dependable braking as you weave your way from trail to trail. Coming complete with a wide range of technologies, this is a great choice of upgrade for smooth and reliable braking performance wherever your next trail adventure leads you. Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. The brand obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride. For the Ultimate, SRAM held nothing back. The brand's engineers sculpted the finest materials - titanium and carbon fibre - to make this its lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance - its test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a revised pad compound with bite. - Pivot bearings for crisp lever feel and a fatigue-free ride. - SRAM's best power to weight ratio in a four-piston brake. Technologies: Bleeding Edge: With this new caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds. SwingLink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Manufacturer's Part Numbers: 00.5020.458.230 2X Black 1550mm 00.5020.457.210 2X Black 1450mm