Your favourite bars just got bigger, longer and lighter, Go figure? The magic of 35, believe the hype. Increasing the bar diameter to 35 allows us to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness and performance Race Face bars are known for. NEW Superlow 10mm rise, slam that cockpit. Get flatbar cockpit height with the comfort and good looks of a riser bar. 760mm full width for increased control without sacrificing weight. Features: Manufactured from UD Carbon with matte clearcoat. Carbon optimized flex for improved small bump compliance. Specification: Built for: XC / Trail. Dimensions: 760mm width, 8° rearward, 5° upward. Rise: 20mm. Weight: 180g. Bar Diameter: 35mm.
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. Features: Manufactured from cold drawn, 7075 Aluminium. 35 optimized triple butted design. Turned up to Rally control with 780 or 800mm width. Rise sizes to for every build and preference 10 / 20 / 35mm. Stealth black on black decals to match every frame colour.
Saddle Up Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height, 25g weight savings from the previous version, and is available with up to 175mm of drop. This post will treat you right.
Power To The Pedal We put a lot of thought into this CINCH chainring so that you don't have to. Loaded with innovation and toughness, this direct mount ring holds the chain tight with narrow-wide tooth profiling and comes in tons of options to compliment your build.
A high performance double chainset from the classic MTB group Forged HollowTech II aluminium cranks offer unrivalled strength-to-weight ratio Lightweight construction for external super smooth bottom bracket bearings For use with 12-speed transmission systems 36/26T chainring combination Super boost 51.8 mm chain line for use with 148 mm rear axle width Stiffness and strength increased with advanced design due to wider spaced bearings and oversized axle 70 degree spider arm for optimal rigidity For use with 12-speed HG+ MTB chains only We recommend that the bottom bracket is initially installed by a bike shop to ensure perfect bottom bracket facing and fit
A high performance double chainset from the classic MTB group Forged HollowTech II aluminium cranks offer unrivalled strength-to-weight ratio Lightweight construction for external super smooth bottom bracket bearings For use with 12-speed transmission systems 36/26T chainring combination Super boost 51.8 mm chain line for use with 148 mm rear axle width Stiffness and strength increased with advanced design due to wider spaced bearings and oversized axle 70 degree spider arm for optimal rigidity For use with 12-speed HG+ MTB chains only We recommend that the bottom bracket is initially installed by a bike shop to ensure perfect bottom bracket facing and fit
Side swing, side pull SLX 12-speed double front derailleur decrease problems with tyre clearance and reduces cable friction Direct frame fit for easy and accurate installation giving perfect alignment Designed specifically with modern trail bikes in mind, Shimano side swing technology front derailleurs increases tyre clearance by 15mm, while new cable routing resulting in the lightest shifting action yet Side pull cable routing 12-speed MTB drivetrain compatibility Specifically developed for 68, 73 mm and press fit 92 bottom bracket shells, with a 48.8 mm or 51.8 mm chain line 36-38 tooth outer ring compatible For 66-69 degree chainstay angle
Side swing, side pull SLX 12-speed double front derailleur decrease problems with tyre clearance and reduces cable friction Direct frame fit for easy and accurate installation giving perfect alignment Designed specifically with modern trail bikes in mind, Shimano side swing technology front derailleurs increases tyre clearance by 15mm, while new cable routing resulting in the lightest shifting action yet Side pull cable routing 12-speed MTB drivetrain compatibility Specifically developed for 68, 73 mm and press fit 92 bottom bracket shells, with a 48.8 mm or 51.8 mm chain line 36-38 tooth outer ring compatible For 66-69 degree chainstay angle
Side swing, side pull SLX 12-speed double front derailleur decrease problems with tyre clearance and reduces cable friction Direct frame fit for easy and accurate installation giving perfect alignment Designed specifically with modern trail bikes in mind, Shimano side swing technology front derailleurs increases tyre clearance by 15mm, while new cable routing resulting in the lightest shifting action yet Side pull cable routing 12-speed MTB drivetrain compatibility Specifically developed for 68, 73 mm and press fit 92 bottom bracket shells, with a 48.8 mm or 51.8 mm chain line 36-38 tooth outer ring compatible For 66-69 degree chainstay angle
The ultimate in reliable lightweight mono lever shifters from the ultimate Shimano MTB groupset, XTR shifters are engineered to perform in the most demanding conditions Light to the touch but positive and crisp Instant Release for super fast shifts, delivering the chain to the next gear the moment the lever is actuated with no hesitation Mono lever allows the shift lever to perform both up and down shift functions when pushing with thumb Shifter features a precision indexing drum with four sets of ball bearings providing low-friction smooth shifting Long carbon shift levers with rubber inserts help to lower shifting effort and improve grip Composite barrel adjuster Band on mount For use with 12-speed only Weight: 79 grams
MT601 tubeless ready 25 mm internal width disc wheel System brings high performance technology to a affordable price point The Hub uses angular contact bearings designed to cradle the balls giving both radial and lateral support for superior strength and durability in real world riding conditions. They also offer precision bearing adjustment and easy maintenance Super quick engaging 36 point in 360deg MICRO SPLINE 12-speed Freehub body giving near instant power transfer Easy to use Center Lock Disc Rotor mount for secure hassle free setup Durable steel axles 24 round butted stainless steel J-bend spokes Contact seals with internal grease sleeve to keep the elements out and the grease in Clincher tyre compatible rim for use with 2.0 - 2.4 inch tyres Internal rim width 24C For use with MICRO SPLINE 12-speed cassettes only Axle not included
Shimano GRX, with its gravel specific ergonomics, optimized gearing options, rugged reliability, and quiet and stable drivetrain, sets itself apart from the rest of the component world The HollowTech II 11-speed single chainset offers optimum gearing for mixed terrains and riding styles Designed to work with HollowTech II type bottom bracket cups Compatible with 11-speed HG chains Anodized aluminium crank arms Lightweight aluminium chainring 4 arm, 110 mm bolt circle diameter Weight: 644 g (40T), 656 g (42T) for 170 mm