Fox Suspension Transfer SL Perf Elite Dropper PostThis dropper seatpost is part of the renowned Performance Elite series and it features a black anodised upper coating for an extra level of protection against wear and corrosion wherever your next adventure leads you. Fox Suspension has also kitted it out with a powdercoat lower coating that allows it to handle all of challenges associated with all-day epics on your favourite trails and day-long adventures on your gravel bike. Also benefitting from internal cable routing, this versatile model provides a sleek look on your ride while also minimising any risk of damage from dirt or debris.Super Light Done RightMeet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has branded it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it (finally) brings the word “shred” into the super-lightweight cross country (XC) and gravel conversation.Performance Elite Series Dropper SeatpostPerformance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, patent-pending head design and proven internals as the Factory Series but they feature a black anodised upper instead of a genuine Kashima coating. This Performance Elite series model's anodised upper is ideal for riders who want increased strength and durability on their ride, while also benefitting from its lightweight and responsive actuation.Features: Upper Coating: Black Anodised Lower Coating: Powdercoat Black Use: Mountain Bike (MTB), Cross Country (XC) and Gravel Cable Routing: Internal only Remote Included: No, available separately Weight: 27.2x50mm Option: 327g; 27.2x70mm Option: 338g; 30.9x75mm Option: 342g; 30.9x100mm Option: 347g; 31.6x75mm Option: 352g; 31.6x100mm Option: 359gTechnologies: Updated lightweight design. Updated Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. 2-position mechanical post that locks at the top and bottom only. Longer travel configurations offer exposed length of 290mm for taller riders. Shorter travel configurations offer shorter total length for smaller riders. Coil spring for consistent return performance. Internal routing only. 27.2, 30.9 and 31.6mm diameter options to choose from. 50, 70, 75, and 100mm drop options to choose from. 70-85deg seat angles are supported. 7mm and 7x9 saddle rails supported. 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible (levers available separately).Manufacturer's Part Numbers: 925-01-203 350mm 27.2 x 50mm 925-01-202 370mm 27.2 x 70mm 925-01-210 355mm 30.9 x 75mm 925-01-208 380mm 30.9 x 100mm 925-01-211 355mm 31.6 x 75mm 925-01-209 380mm 31.6 x 100mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Waterproof MTB Jacket IIThe original Endura MT500 mountain bike jacket won awards for its performance. And now the MT500 Waterproof MTB Jacket II builds on the award-winning legacy with improvements to both waterproof performance and durability, making it the best yet. For epic days on your mountain bike, when the rain seems to be in for the day, the MT500 Waterproof MTB Jacket II will keep you dry and comfortable as you shred muddy trails. It starts with the extremely waterproof 3-layer ExoShell40DR 3-Layer waterproof fabric. This does a brilliant job of keeping the rain out even when it's incessant. And with seam-sealed construction, water is prevented from seeping in when you're pedalling in the wet for long periods of time. Not only waterproof ExoShell is also an extremely breathable material, vital for comfort on the bike. Rain can't get in. Sweat can get out. The result is perfectly dry comfort. On long climbs or fast trails, you may find yourself feeling a bit too warm. But that's ok. Underarm vents and vented front pockets allow you to easily regulate airflow and body temperature on the go. When you’re on the trail and skipping across rough terrain then the relaxed fit and strategically placed stretch panels keep you moving easily. If you ride with a backpack, you’ll also be pleased to see extra-durable shoulder panels, complete with silicone grip to keep straps firmly in place.Wet weather. No problem. Grab your MT500 Waterproof Jacket II and have fun on even the wettest and the muddiest of MTB trails.Features:Materials: 80% Polyamide, 15% Polyester, 5% ElastaneExoShell40DR 3-Layer waterproof fabric in a fully seam-sealed constructionDurable shoulders with silicone grip and ergonomically positioned stretch panels3D adjustable helmet-compatible hoodVentilation from large underarm 2-way zipped vents extending onto back - compatible with backpacksFront pockets doubling as vents hidden internal pocket and sleeve lift pass pocketWater-repellent front zip with storm flapReflective trims on the hood and rear tailSoft-touch lycra inner cuff for added comfort and protectionRelaxed FitWATERPROOF: 20000 mm BREATHABLE: 40000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Lowa Active Cream PFC Free 75ml is the ideal colourless intensive wax care for all leisure shoes as well as climbing and hiking boots. It keeps the leather supple over the long term and prevents drying out and brittleness when used regularly. Plus, it is completely PFC-free.
Fox Racing 6" Ranger Cycling SocksThe MTB-specific Fox Racing 6" Ranger Cycling Socks give perfect comfort for when you're enjoying the adrenalin rush of speeding along mountain bike trails. With their mesh zones, the 6" Ranger Cycling Socks allow your skin to breathe easily, ensuring there's no uncomfortable sweat build up when riding. A compression arch offers a snug fit inside your shoes and the flat stitching across the toes removes any chance of irritation. The rib-knit upper keeps them firmly in place over any terrain too. It's easy to overlook the importance of great socks for adding comfort on the bike. And so when you're heading out mountain biking, ditch the inferior sports socks and slip on the awesome 6" Ranger Socks to ensure your feet remain perfectly comfortableFeatures:Materials: 69% Polyamide, 14% Cotton, 12% Polyester, 5% ElastaneMesh zones provide added breathabilityCompression arch support for superior fit and comfortRib-knit upper won’t slide down when the trail gets roughFlat-stitch toe construction offers improved comfort6 inch cuff heightBuy Fox Racing Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cycling kit needn't be complicated. And as such, GOREWEAR take a less-is-more approach with their Torrent Long Sleeve Cycling Jersey. Selecting a super-soft high-performance fabric, they craft it into a jersey with a streamlined fit, ensuring hard-earned watts aren't wasted battling flapping fabric. With an elastic gripper at the lower hem, the jersey stays nicely in place, even when you're dropping into a low and aero riding position. Once you're on the go and warming up, the jersey deals with any sweat quickly and efficiently, preventing you from feeling uncomfortable during and after your efforts. With a full-length front zipper, it's also easy to regulate airflow and body temperature. Whether your ride is long or short, there's plenty of space in the three pockets for spares, nutrition and a vest or jacket. There's a zipped pocket for valuables too. And with reflective details, you'll be easier to spot during early starts or late finishes. Form-Fit GOREWEAR’s most performance-oriented fit, ‘Form Fit’ sits close to the body to improve aerodynamics and enhance both moisture management and thermal efficiency. This fit gives you a jersey that won’t flap too much in the wind, saving energy over the course of your ride.
The PLT CT Handlebar is constructed from a high strength, yet lightweight, aluminium alloy. Due to these properties this particular alloy is commonly used in the aircraft industry. The double butted design allows for lower weight whilst maintaining strength. The oversized 31.8mm clamp diameter increases strength and rigidity, reducing unwanted flex. Road Racing Drop HandlebarLightweight, High Strength Aluminium Alloy ConstructionSingle Recessed Groove Cable RoutingOffers a Choice of Comfortable PositionsWeight from 245 Grams
For those who own a crank with a 104 mm bolt circle diameter and want to drive the Shimano 1x12 XTR 9100 or XT 8100 group, Race Face has the right chainring on offer. The tooth profiles are specially tuned for optimum chain running on the Shimano 12-speed MTB chains. To be able to dispense with a chain guide, the teeth are made with alternately thick and thin profile (narrow-wide). The chainring is CNC machined from one piece of 7075-T6 aluminium and then anodized. For a particularly high rigidity it has a material thickness of 4mm.PLEASE NOTE: The chainring is only compatible with Shimano 12-speed MTB chains.Material: 7075-T6 aluminiumNumber of teeth: 34Bolt circle diameter: 104 mmAttachment: 4-armCompatibility Drive: Shimano 1x12 MTBCompatibility chain: Shimano 12-speedColour: Black
The one thing we all need to go riding. Our Standard Presta Valve Tubes feature a moulded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth ride after ride. Individually cured for consistent tube thickness = the utmost in quality.
GripGrab Aerolite InsideGrip Long Finger GlovesCreated to be the ultimate glove for mountain bike racing, the GripGrab Aerolite InsideGrip Long Finger Gloves delivers incredible comfort, control and hot-weather performance.The Aerolite InsideGrip Long Finger Gloves are tuned for racing and hot weather thanks to the lightweight, high-stretch and breathable construction. A super-slim palm gives precise control and terrain feel and with no padding ensures a second-skin-like feel. On the inside of the gloves, the GripGrab's InsideGrip™ technology sees silicone textures on the palm, index finger and thumb to prevent slippage between glove and skin further enhancing bike control. On the outside, a touchscreen-compatible thumb and index finger keeps you in control of all your mountain biking tech.With dry and dusty trails beckoning and the speed of summer in the legs, these full-finger mountain bike gloves deliver the ideal level of grip, comfort and breathability to keep you in control as you fly across any MTB trail. Features:Materials: 95% Polyester, 5% ElastaneSlim padless palmBreathable, stretch backInsideGrip™ technologyTouchscreen compatibleSlip-on cuffBuy GripGrab Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
The KM1 features Full Engineered 3D knit construction for the next generation of MTB race shoes. These shoes have offered exceptional comfort on the way to many podiums from World Cup to marathons. Light, breathable, proprietary Engineered Knit construction eliminates pressure points, fits like a glove and is super breathable. They also feature Race winning energy transfer and durable trail traction with the Dual Compound Carbon outsole featuring Michelin rubber lugs. This is the ideal shoe for you if you are looking for a top level, incredibly lightweight shoe suitable for Gravel as well as XC/Marathon riding, which offers perfect fit and optimum power transfer. The Benefits of DMT Knit: DMT’s propriety knit technology is not only truly revolutionary, but features across their full range, all the way from the highest level down to their entry level models. This means it offers ALL cyclists for the first time, whatever their level of riding, a shoe that fits as comfortably as a glove! Engineered 3D Knit features a multi-layer, once piece construction which flexes and conforms to the individual shape of each rider’s foot, offering a truly comfortable and customised fit. Mapping technology has been used to design the different integrated structures within the knit, insuring perfect support for the foot across all areas. The upper wraps around the foot without compressing it in any way DMT Knit is not only incredibly lightweight, but it is also highly breathable, wicking moisture away from your feet, much like the fabric of your cycling jersey works to keep you dry when you are riding hard. No seams, no excess material and no stitching equals no pressure points
dhb Aeron Lab Raceline Women's S/S JerseyThe dhb Aeron LAB Raceline Women's Jersey is built for speed. A close to the skin fit and aerodynamic fabrics combine to create a jersey that won't hold you back.Disruptive Aero FabricsThe Women's LAB Raceline Jersey makes use of specific fabrics that are designed to disrupt airflow, leading to less drag, and ultimately some extra gains in your pursuit of speed. Across the shoulders, the length of the sleeves and down the side panels, dhb have used a top quality mesh fabric, there to improve your aerodynamics and help you cut through the air quicker. Added to a lightweight, high-wicking fabric for the body of the jersey, this is the perfect race-ready combination.Race Ready FitNot only have dhb used aero-tuned fabrics, but they've also focused on giving the jersey a fit that is designed for speed. Designed and developed with top-level road cyclists, Aeron LAB has a fit that is close and aerodynamic. It's uncompromising in this, with its sole aim to help you ride further, faster and in greater comfort, with no excess fabric to catch the wind. It's noticeably closer fitting and more compressive than dhb's Aeron kit and really excels when the hammer is down. The low neckline and shortened front zipper is designed to maintain a perfect fit when adopting a low racing position, ideal when pushing the pace on the drops. Lastly, the long sleeves are both aerodynamic and supportive, leading to comfort and performance gains.Aeron LAB. Engineered in the best laboratory we know: out on the road.Over two years in the making, the all-new Aeron LAB collection combines rigorous real-world testing with the best components available, resulting in a collection tuned to the needs of demanding riders reaching for new levels of performance. Because when you’re pushing yourself, you need kit that exceeds your expectations.Features:Main Material: 92% Polyester, 8% ElastaneInserts: 58% Polyamide, 42% ElastaneRace ready, second skin fitCombination of three premium mesh fabricsHigh performance, lightweight stretch fabricsLaser cut sleevesFull length YKK Zipper4 rear pockets including hidden toko envelope pocket.Dropped neck line for increased comfortBuy dhb Cycle Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Description for Fifty Four Degree Three Season Socks - S not available