The BikeShield Full Pack Oversize Frame Protection Kit is a 10-piece set that protects all parts of the frame from scratches and chipping. Available in a gloss or matte finish. BikeShield keeps your bike in mint condition by protecting it from scratches, grit and stones. It offers clear advantages over other products which aim to provide invisible protection for bike frames. ON the bike it is invisible. Peel it off and the frames is like-new! Ultra-tough protectionSelf-healing when cutEasy to apply or remove by handLeaves no sticky residueInvisible on the bikeWill not yellow with ageLong lastingIncludes:2 TubeShield: 10x50cm3pc StayShield Kit5pc CableShields
From the chill of misty early spring or autumn rides to the coolness of an early morning start to a long summer ride, the Spring Fall Arm Warmers provide just the right amount of warmth for comfort. However, once you've started to build some body heat, or the sun begins to arm the day, the aggressive moisture-wicking deals quickly with any sweat you generate, preventing it from pooling on the skin. Not only are they great for lightweight insulation, but the warmers also provide protection against the sun's rays during a clear sunny day of cycling. Assos' Circular Seamless technology gives a smooth, irritation-free fit, making them barely noticeable once you pull them on.
The Skyline Short strikes the perfect balance between a casual cut and race performance. A revised 2-way stretch rear panel provides an improved fit and features breathable mesh for better cooling. The mountain bike shorts also feature the Troy Lee Designs Air Comp liner with a TMF pad. Praised for its combination of performance and value, the Skyline is now made from Bluesign certified approved fabric making the shorts environmentally sustainable. Key Features 95% Coolmax® Polyester/5% Lycra® Bluesign certified approved fabric with warp and weft stretch material Single TLD low profile snap button with Velcro backing for secure closure Improved fit with revised rear 2-way stretch panel TLD Air Comp liner with pad Slim TLD embossed Velcro waist adjusters Inner waistband silicone grip
Gloworm Optic XS/X2 Flood (G1.0)The Optic XS/X2 Flood (G1.0) from Gloworm are replacement/spare optics that are interchangeable for different light effects and diffusion for G1.0 and G2.0 cycle lights.Genuine replacement optics for your Gloworm Light. Choose from either: Spot, Flood or Wide for the X2/XS G1.0, Spot, Wide or Honeycomb for the X2/XS/XSV G2.0 or Spot/Spot, Spot/Wide or Wide/Wide for the CX/Alpha. SPOT (96% Efficient/FWHM 17 degrees):The spot optic provides the narrowest beam. It is also the most efficient, allowing the greatest light output. It can be used in conjunction with another spot optic to gain the greatest possible output and therefore beam distance. This configuration is best used on the helmet to see down the trail or to spot the exit of a turn. Alternatively, the spot could be paired with another optic type from an alternative light pattern. FLOOD (84% Efficient/FWHM 25 degrees):For a smooth diffused light pattern the Flood optic is the best option. It takes the light and smooths the light across the width of the beam, making it slightly easier on the eye and creating even light from left to right. A pair of Flood optics would provide a wall of smooth light, however in doing so a significant amount of light intensity would be lost compared to a pair of spot optics. The flood is best used in tandem with a spot or wide optic. WIDE (87% Efficient/FWHM 40 degrees):This optic provides a wide rectangular beam, it utilises the light output to provide more peripheral light and less light in the vertical axis. While not as optically efficient as the Spot Optic, it provides very good output for a wide-angle optic. Two wide optics can be paired as a great option for use on the road, however, when paired with either a flood or spot optic an effective hybrid beam can be created. HONEYCOMB (87% Efficient/FWHM 30 degrees):Designed for use with the XSV, the Honeycomb Optic is used to gain a smooth diffused light pattern when used with 2 spot optics or other honeycomb optics. It takes the light and smooths it across the width of the beam, making it slightly easier on the eye and creating a more even transition from the bright beam centre. Features: Gloworm G1.0 The X2 and XS use the same single cone optics, whilst the CX and Alpha share the same double optics. The G1.0 XSV uses the same optics as the G2.0 XSV Gloworm G2.0 The X2 and XS use the same single cone optics The XSV uses the same optics as the G1.0 XSVBuy Gloworm Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Our best selling Jersey that is easy to wear and with supreme comfort. Skyline jersey is a relax fit technical jersey made of newly developed poly spandex blend with a new fit combined with colors and graphics that are easier to wear for riders of all types. Key Features: Targeted for anyone who throws a leg over a bike,Aimed for recreational, track and trail rides ,Relax fit mountain bike jersey, casual in nature, technical by design, 92% Polyester/8% Spandex®, Relaxed torso, Loose fit sleeves, Versatile construction, Moisture wicking, Fabric is certified is Bluesign® approved .
The RS4 Road Rear Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hubs on the planet are available with centre lock. Machined from forged 2014 T6 aluminium billet and with sealed stainless steel cartridge bearings throughout, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. The hub is available with an axle width of 135mm or 142mm and is Shimano and Sram cassette compatible. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.2 Pawl ratchet with 44-point engagement (8 Degree)Reduced drag ratchet mechanismMachined from forged 2014 T6 aluminium billetStainless steel bearingsCentre lock disc splineAvailable in 135mm x QR or 142mm x 12mm Thru axle sizes11 Speed Shimano and CampagnoloAluminium freehubShimano / SRAM Cassette compatibleApprox. Weight: from 272g
Specifically designed for XC racing, this high-quality suspension fork is part of Fox Suspension's renowned Factory Series with a build that's feature-packed and engineered to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised cross country racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions. Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer. FIT4 3-Position Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjustment in the Open mode, allowing riders to fine-tune their exact damping preferences. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimises stiffness with the absolute minimal amount of material.
THE HRC TEAM SOCK HAS BEEN DEVELOPED WITH SIMILAR QUALITIES TO THAT OF A COMPRESSION SOCK INCLUDING INCREASED CIRCULATION AND GREAT ARCH SUPPORT. The result is a sock that fits and feels superb made from Meryl® Skinlife™ fibers to wick moisture away and help maintain your skin's natural bacterial balance. When every bit of comfort and performance matters the HRC Team Sock is the one to cross the finish line with. SPECS FABRIC MERYL SKINLIFE CONSTRUCTION 45% MERYL SKINLIFE 25% ELASTIC 15% POLYPROPYLENE MADE IN ITALY
Dual Compound Two compounds used within the tread of select tyres to offer lower rolling resistance and increased cornering grip. EXO Protection Technology An extremely cut-resistant and abrasion-resistant material added to the sidewalls of select mountain tyres. This densely woven fabric is also lightweight and highly flexible, ensuring that the performance of the tyre remains unaffected. Choose EXO Protection for exceptionally rocky, treacherous trails where the chance of sidewall cuts and abrasions is high. TR (Tubeless Ready) Technology Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Their TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight. Maxxis Tubeless Ready tyres are the only Maxxis tyres approved for use with liquid sealants.
A perfect choice for fast flat road races or windy triathlons this wind-slicing carbon wheel features progressive aerodynamic technology and a stable ride quality. The rim is engineered with a NACA profile that’s 65mm deep and 26mm wide.The wide rounded shape of the Cosmic SL 65 rim was developed through countless hours in the wind-tunnel to produce the lowest possible drag without sacrificing stability in crosswinds. New refined spokes make it 80g lighter than its predecessor the Comete Pro Carbon UST Disc. The new rim bed shape makes it easier than ever to fit tubeless or tube type tires. Our new Infinity hub platform optimizes the spoke lacing for efficient power transfer through highly controlled spoke tension. And the Instant Drive 360 freewheel coupled with automatic bearing preload (QRM Auto) provides fast engagement high stiffness and extra durability.These wheels are engineered specifically for disc brakes with an optimized spoke count and lacing. They are offered in Center Lock only and are compatible with 12mm thru-axles that convert to quick release with included adapters. They are available for Shimano or SRAM XD-R cassettes and can convert to Campagnolo with an optional driver body. Key benefits Proven aero speed 65mm deep/26mm wide NACA rim profile for low drag and stability in cross winds Optimized for 25mm tires Flat spokes Faster acceleration and better control Reduced inertia of the lightweight rim delivers instant acceleration Lighter spokes make the wheel feel snappier Disc-brake specific spoke lacing thru-axle compatible Improved UST Road delivers more speed comfort and control in an easy to use tubeless system No tubes means less friction better efficiency and grip and a reduced risk of punctures New rim bed shape makes it easier to mount and change tires Rims Tire: UST Tubeless and tubetype Disc brake specific profile Internal width: 19 mm UST tubeless technology Drilling: traditional Height: 64mm ETRTO size: 622x19TC Material: 100% carbon fiber Spokes Count: 24 front and rear Nipples: brass ABS Material: steel Shape: straight pull flat double butted Lacing: front and rear crossed 2 contactless Delivered with User guide UST valve and accessories Front QR adapters Pre-installed tubeless rim tape Rear QR adapters for Instant Drive 360 Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible QRM Auto bearing preload technology Front: Quick release and 12x100 through axle compatible Infinity hubs Intended use Recommended tire sizes: 25 to 32 mm ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 675bar/97PSI with a 23mm tyre - 38bar/55PSI with a 62mm tyre Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with included adapters Front axle: 12x100 thru axle easily convertible to quick release with included adapters Not compatible with 15mm through axles Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram or XD-Road Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 12mm front hub cap (V2680501 - Delivered with the wheel) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) 12 to 9mm rear adapter for quick release (V2510801 - Delivered with the wheel) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) ID360 N3W freewheel body (V4270101)
POC Tectal Race MIPS HelmetDeveloped using POC’s Whole Helmet Concept™, the POC Tectal Race MIPS Helmet deploys the powers of MIPS to keep your head protected on your all-mountain, trail-shredding, enduro-racing, dirt-kicking mountain bike adventures. An advanced all-mountain helmet, the Tectal Race MIPS Helmet feels fantastic to wear when you're enjoying the thrills and heart-pumping exhilaration of going full speed down MTB trails. And should you push your capabilities just a bit too far, the superb range of protective features add safety should you take a tumble. Take on The Trails with ConfidenceThe construction method of the Tectal race is borrowed from POC's groundbreaking Octal road cycling helmet. This sees a tough unibody shell bonded to a shock-absorbing EPS liner. The shell provides durable protection against minor knocks and in the event of a more serious fall enhances structural integrity. An Aramid bridge system, first seen in POC’s proven and award-winning Trabec helmet also allow POC to further enhance structural stability and improve penetration protection.At the core of the helmet is the EPS foam liner. This is the layer that soaks up harder head impacts during a fall. The density and thickness vary in order to optimise protection where it's needed most.The design of the Tectal Race also sees greater coverage specifically tailored for mountain biking. This gives extra protection across the temples and back of the head, so you're covered if you go over the bars or off the back.And if that wasn’t enough, a RECCO® Reflector lets emergency services scan for you should you become lost on a backcountry mountain biking adventure.MIPS Integra Head Protection SolutionThe Tectal Race also features the MIPS Integra system. This brings together POC's 'whole-helmet' safety and design ethos with the fully integrated brain-protecting technology of MIPS. This holistic approach sees every detail of the helmet engineered to work in harmony with each other, giving you new levels of seamless safety, comfort, ventilation, fit and function.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool ComfortWhen you're riding, you'll soon be building up body heat. And with it, sweat. And so POC have ensured ventilation is optimised. In fact, they've used wind-tunnel testing to get the airflow just right, so whether going fast or slow, you'll enjoy fresh air over your head. 360-degree Fit SystemIn order to keep the Tectal in place, you’ll find POC’s lightweight 360° fit system. This offers an easy-to-operate and precise fit, ensuring your helmet remains comfortable when riding and stays securely in place in the event of a crash.FeaturesMIPS Integra Head Protection SolutionEPS (Expanded Polystyrene) liner - EPS liner gives optimized protectionUnibody shell construction - unibody Polycarbonate shell enhances the structural integrity of the helmetAramid Bridges - moulded to the helmet liner to enhance structural stability and improve penetration protectionWind-tunnel optimized ventilationExtended protection zones - designed to provide more coverage at temples and back of the headEye garage - securely store sunglasses in the ventilation holes at the backRecco reflector - helps rescue services easily and quickly locate you if something goes wrongAdjustable 360-degree fit systemAdjustable peak - adjusted for personalized protection from the elementsWeight: 385g (M)Certification - EN 1078Shop all MIPS helmets - Click hereBuy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Lezyne Super Drive 1600XXL KTV Pro Smart SetThis light set from Lezyne offers exceptional visibility for cyclist after dark. Ideal for commuters or urban riders, this set includes the Super Drive 1600XL Front Light which features a long-lasting performance output of 1600 lumens, to keep you illuminated in low-light. The front light attaches to your handlebar with ease and benefits from a wide-angle light pattern thanks to its Tri-Focus Optics lens.Long-lasting and Life-Preserving Bike Light SetThe front light comes housed within a hard-wearing aluminium casing with built-in cooling fins to prevent overheating during prolonged use. It also features an automatic day and night sensor which adjusts the lumen output to suit your riding conditions. The KTV Pro Smart rear light stays waterproof and weatherproof thanks to its co-moulded casing, with its Wide-Angle Lens delivering a 270-degree range of visibility, to keep you in almost constant view of other road users.Both lights feature integrated mounting systems for easy installation and removal, and both are super-simple to recharge. The Super Drive gets back to full power using the included Micro-USB cable, while the KTV Pro Smart features an in-built USB stick for a speedy and easy power boost.Front Light Features:Maximum Output: 1600 lumensMaximum Runtime: 148 hoursRecharge Time: 7 hoursLens Type: Tri-Focus OpticsLight Modes: 7Charging Type: USB rechargeableMounting: Integrated mounting systems on each lightWaterproof Rating: IPX7Weight: 236gRear Light Features:Maximum Lumens: 75 lumensMaximum Runtime: 19.5 hoursRecharge Time: 3 hoursLens Type: Front Light: Tri-Focus Optics; Rear Light: Wide-angle LensLight Modes: 6Charging Type: USB rechargeableMounting: Integrated mounting systems on each lightWaterproof Rating: IPX7Weight: 45gFront LightBlast: 1000 lumens – 2.30 hoursEnduro: 600 lumens – 3.45 hoursEconomy: 250 lumens – 10 hoursFemto: 15 lumens – 148 hoursFlash: 150 lumens – 33 hoursPulse: 150 lumens – 38 hoursOverdrive: 1600 lumens – 1.45 hoursRear LightDay Flash: 75 lumens – 10 hoursFlash One: 25 lumens – 8.45 hoursFlash Two: 10 lumens – 19.30 hoursPulse: 25 lumens – 8.45 hoursEconomy: 3 lumens – 18 hoursSolid: 20 lumens – 4 hoursBuy Lezyne Lights from Chain Reaction Cycles, the World's Largest Online Bike Store.