Nukeproof Reactor 290 Carbon Frame (RockShox Shock)The Reactor 290 Carbon Frame from Nukeproof features an ultra-strong monocoque carbon fibre build that is ideal for high-speed trail riding anywhere on Earth. This trail-ready full suspension mountain bike (MTB) frame is more than capable of handling all the demands associated with all-day epics on the trails. Ready for charging across rock gardens, tree roots and debris, Nukeproof has also kitted out this model with a high-quality RockShox Super Deluxe Ultimate RC2T rear shock that brings exceptional smoothness, traction tuneability and control to every ride, over all terrain conditions. Designed for modern trail riding, its 148x12mm Boost rear hub spacing gives it increased stiffness and strength, while its updated geometry with internal cable routing delivers slick handling on the most demanding of terrains.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or Play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. RockShox Super Deluxe Ultimate Rear ShockDebuting a revolution in damper technology, the RC2T damper, found at the Ultimate level, allows for the most precise compression tuning ever seen—the kind that makes the millisecond's difference between winning and learning. Tunability's the name of the game—now you can fine-tune shock feel throughout travel from top to bottom out—or bottomless—it's up to you to decide. Super Deluxe stakes its claim as the premier performance technology required by riders gunning for the crown. Let the winning legacy live on. Engineered to strike a chord, the new DebonAir+ system was built on the idea of tuneability. Designed to meet the needs of all types of riders, DebonAir+ offers two different air cans to augment each frame's particular kinematics. Utilizing a needle that rations the flow of oil as the piston moves through the stroke, Hydraulic Bottom Out kicks in within the last 20% of travel, sparing you the pain of that harsh clanking bottom out after impact without sacrificing reactivity or traction. Found in our Super Deluxe lineup, Hydraulic Bottom Out plays nice with our Bottomless Tokens, allowing riders to fine-tune their air spring without worrying about bottoming out. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre, 130mm travel Use: Mountain Bike, All Mountain, Trail Shock: RockShox Super Deluxe Ultimate RC2T, Custom 0L1 32SB tune (L1 compression Tune with Linear Air Can, 0 Neg, 1 Pos Spacer and 320 lockout force) 210x55mm, Bearing End Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro Bearings Weight: 3.5Kgs/7.7lbs (Medium option)RockShox Super Deluxe Ultimate Technologies: RC2T Damper, the most tunable shock damper RockShox has ever made, offers completely independent High Speed and Low Speed Compression adjustments, eliminating “cross-talk” so you can tune your shock to exactly how you want it to perform DebonAir+ air spring maximizes fine-tuning potential, allowing you to tune both the negative and positive air volume to perfectly match your bike, desired ride feel, and the trail ahead The optional Hydraulic Bottom Out kicks in to restrict the flow of oil within the last 20% of travel, offering a soft hydraulic cushion that reduces harsh bottom out 15 clicks of Rebound adjustment offer a wider range of tunability and accommodate more rider types Castled bottom out bumper reduces harsh bottom-out, leaving extra room for the bold to go big Increased bushing overlap maximizes small bump performance and grip Separate and independent Open and Threshold pistons tuned exactly for your ride Fresh new premium graphics package to flash on the podium or as you blaze past your buddies on the doubletrack Top-of-the-line Maxima Plush Dynamic Suspension Lube reduces friction to help maintain tractionBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
MET Vinci Road Helmet (MIPS)With its cutting-edge MIPS-C2® protection system and exceptional venting, the MET Vinci Road Helmet (MIPS) is both extremely protective but also light and airy. This is a pro-level performance at an affordable price.The MET Vinci Road Helmet (MIPS) was made for optimising your performance yet keeping you comfortable and safe on longer rides. Inspired by the award-winning Trenta cycling helmet, the Vinci helmet is exceptionally lightweight and features internal air-channelling that works in sync with its exhaust ports to maximise ventilation.A built-in MIPS-C2® brain protection system also enables the Vinci to slide relative to the head in the event of a crash, redirecting any potential damaging rotational movement, while reflective rear stickers ensure you remain visible in low lighting.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Features:In-mould polycarbonate shell with EPS liner with MIPS-C2® technologySafe-T DUO Fit SystemVertical adjustmentPonytail compatibleReflective rear stickersInternal air-channelingHand washable comfort padsAdjustable cam dividerWeight: 245g (S), 265g (M), 285g (L)CE - AS/NZS - US certificationShop all MIPS helmets - Click hereBuy MET Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Assos Trail FF GlovesTaking on technical mountain bike trails requires a confidence inspiring grip of the bars and the Trail FF Gloves from Assos deliver just that. Assos' design team spent countless hours riding, testing and refining patterns and materials for their Trail FF Gloves. The extensive testing led them to a design that is pre-shaped, the 3D structure mimicking the anatomical shape of the hands when gripping handlebars. This carefully engineered design provides the right level of support where you need it and reduces bulk where you don't. The palm makes use of a two-layer construction, the first layer is a durable 3D mesh to which a light perforated padding is added at the upper sections, plus across the thumb where body weight is often focused. To boost durability, the fingers benefit from a double layer of material and silicone on the braking fingers gives firm control of the levers. Lastly, a flexible cuff provides a sleek and comfortable fit while minimising weight. Features:Material: 50% Polyester, 40% Polyurethane, 10% Polyamide3-Mesh promotes breathability, constructed with thin yarns to keep the palms cool and dryPerforated Synthetic Leather - durable, lightweight material that promotes grip, while also supporting and protecting the handPalm Padding - Pads flex with the hand to eliminate hot spots and bunchingSilicone Grippers - Applied to index and middle fingertips for brake lever controlAnatomic Cut - 'No wrinkle' construction creates a 3D curved structureTerry Thumb Panel -Highly absorbent material aids in wicking moisture from the skin's surfaceBuy Assos Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.
Leatt Retro T-ShirtPart of the Leatt Retro casual wear range, their Retro T-Shirt brings you easy-going style and comfort.Made from super-soft material, the Retro T-Shirt brings Leatt style to your everyday wardrobe - after all you can't be slaying trails 24/7. Quick-drying and anti-odour it's a tee you can wear day after day and always feel fresh. A chest pocket and Leatt graphic give a subtle and stylish finish while the regular fit gives you all-day comfort too.Features:Materials: 100% CottonHigh-performance soft touch fabricQuick-dryingLong-lasting freshnessTaped collarChest pocket and Leatt graphicRegular fitBuy Leatt Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
2 tyre volumes adapted to the various Gravel practices.,2 specific designs adapted to these 2 sections to optimise performance/ridability/comfort.,High-quality casing for a better defection capacity on roads and paths.,Resistance to punctures and tears.At a glanceDurability: ••••Comfort: •••••Lightness: •••••Performance: ••••Puncture Resistance: •••••Grip: •••Size: 700×35ETRTO Size: 35-622,Tubeless Ready,Hardskin,Folding bead,Black,TPI: 127,Weight: 350g.Size: 700×38ETRTO Size: 38-622,Tubeless Ready,Hardskin,Folding bead,Black,TPI: 127,Weight: 375g.
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturer's entry level bearing.These standard ABEC 3/5 bearings are designed for use within bottom brackets or hubs and give outstanding performance and longevity to your components.
Built for precise and swift shifting across our wide range 11-speed cassette, the NX Grip Shift brings industry changing technology to everyone.
The HollowTech II 12-speed Ultegra chainset offers an ideal balance of light weight and stiffness, making it the perfect choice for both enthusiast and competitive riders HollowGlide hollow outer chainring gives vast improvements in rigidity by virtually removing outer chainring flex and hugely improves shift performance, even under high load The chainring teeth have been developed to work in conjunction with 12-speed HG chains for increased contact to provide greater efficiency and improved power transfer Industry leading HollowTech II cold forged 4 arm hollow cranks have been evolved for maximum rigidity while reducing weight Wide gear pitch spacing increases clearance between chain and leading teeth to provide compatibility to frames with O.L.D. 135 / 142 mm A wide range of chainring options and crank arm lengths are available to meet the needs of all riders and racing disciplines HollowTech II integrated bottom bracket uses a wider bearing placement and larger axle diameter for increased stiffness and efficiency HollowTech II integrated bottom bracket seal design has minimal bearing interface ensuring smooth rolling and increased durability(sold separately)
Giro Ranger Off-Road ShoesThe Giro Ranger Off-Road Shoes are an XC mountain bike focused cycling shoe at home on fast-flowing summer MTB trails or the muddy and intense jostling of cyclocross races.The first feature of the Ranger Off-Road Shoes to catch the eye is likely to be the Synchwire™ upper. This innovative one-piece upper design trickled down from their premium race shoes, delivers a lightweight and comfortable fit. Mesh zones within the design also ensure your feet remain cool and skin can breathe as the day warms up. The upper is quick-drying too, letting you speed through muddy puddles without a care. Rubber reinforcements are added at the toes and heels, offering protection when you're tackling tough terrain and racing for the win. For adjustment, Giro uses their ever-dependable 3-strap system. It's light in weight, doesn't mind mud and rain and is easy to adjust, even on the go. Nothing fancy or fussy, just a reliable closure every time. Synchwire™ TechnologyThe one-piece Synchwire™ upper deployed here has been tried and tested on Giro's premium mount off-road cycling shoes. This supple thermo-bonded exco-structure gives you a shoe with minimal weight but one with optimal foot-hold and support. The upper also features more ventilated mesh zones to provide excellent ventilation and breathability, keeping your feet cool as the heat rises. Tenacious GripThe sole of the Rangers is a co-moulding of a stiff nylon sole unit and grippy rubber-lugged tread. On the bike, the stiff sole keeps pedalling smooth and efficient while the rubber lugs dig into any surface should you have to hop off and hike-a-bike some trail sections. And for particularly muddy days, think typical winter cyclocross race, steel toe spikes can be added for more off-the-bike traction.Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Also suitable for indoor trainers in gyms etc.Features:One-piece Synchwire™ upper with thermo-bonded exo-structureClassic 3-strap closureRubber reinforced heel and toe sectionsReflective heel tabCo-moulded nylon and rubber high-traction lugged outsoleMid-foot scuff guardAccommodates steel toe spikes2-bolt cleat compatible (cleats not supplied)Weight: 315 grams (size 42)Buy Giro Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Castelli Women's Go Cycling JacketThanks to its windproof and water-resistant construction, the Castelli Women's Go Cycling Jacket is a versatile pick for when you're cycling in changeable weather conditions. The Go Cycling Jacket makes use of the same GORE-TEX INFINIUM™ WINDSTOPPER® three-layer stretch fabric as their iconic Alpha ROS 2 jacket. However, it forgoes the Alpha’s integrated insulating layer, allowing you to tailor your base layer weight and insulation levels, offering comfort across a wide variety of temperatures. With the INFINIUM™ WINDSTOPPER® preventing cold winds from robbing body heat, you’ll soon feel, and hold onto, the warmth you generate through riding. It’s highly breathable too, so a sudden injection of pace or a stiff climb won’t result in you being soaked in sweat. Lastly, water-resistance also keeps off light rain and road spray.With weather protection taken care of, next comes the Castelli fit. The tailoring ensures a close, streamlined fit, but one with some space for layering and to be suitable for all shapes and sizes. A no-sew hem gives the jacket a smooth elegantly technical finish while hidden internal cuffs at the wrist boost comfort by eliminating drafts.Three rear pockets give plenty of space to load up for your longest of rides and a large reflective strip across the bottom ensures you’re visible when training finishes after dark.Similar in warmth to a Perfetto ROS Long Sleeve, the Go Cycling Jacket gets a slightly more relaxed fit and a more tailored look for those of you not in race mode. Stretchy, comfortable, breathable, windproof, water-resistant, elegant, and lightweight, this jacket has it all. Get out and Go.Features:Materials: 100% PolyesterFull soft-shell construction with GORE-TEX INFINIUM™ WINDSTOPPER ® 150 keeps cold wind out while offering exceptional breathabilityExcellent stretch with a neutral fit for extra comfortInternal stretch wrist closure for perfect glove interfaceZippered chest pocketYKK® Vislon® zipper with rubberized zipper pullNo-sew waist construction for clean, technical look3 rear pocketsLarge reflective strip across pockets for low-light visibilityWeight: 291g (M)Suggested temperature range: 4 to 14 degrees CBuy Castelli Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Five-brush set containing specialist cleaning tools for removing mud, road grime and caked-on dirt from your frame and components to get your bike sparkling cleanA must-have kit to ensure an all-round clean and fully functioning bike with the minimum of effortSet includes five brushes accompanied by details of the multiple uses of each brushUse brushes to effectively remove mud, dirt and road grime from all areas of your bikeIncludes 22 cm long ball chain for hanging brushes up to dry after use.
ODI Stay Strong Lion Heart BMX GripsODI is the world leader in grip technology and uses proprietary compounds which have been extensively researched and tested by top athletes around the world to ensure that they provide the highest level of comfort and longevity possible.Features:Stay Strong Grips made in the USA By ODI Soft Krayton Rubber Based on the Longneck grip it features the classic mushroom style collapsible rib pattern with Stay Strong graphics Constructed of the ODI proprietary grip compound for comfort and durability Reinforced Closed ends to prevent grip blowout 143mm Long Bar end caps included Buy ODI/Stay Strong Components from Chain Reaction Cycles, the World's Largest Online Bike Store.