DMR Vault V2 PedalsBuilding on the established design of it top-selling V8 and V12 models, DMR’s V2 Vault flat MTB pedals are ideal for everything from smashing down descents and climbing steep trail sections. With their tough CrMo (Chromoly) axles and extruded 6061 aluminium platforms, they are both durable and low in weight.Tough Downhill Flat PedalsThis tough construction means you can confidently take on the biggest jumps and be certain that pedals can withstand the landing. They also offer excellent grip, foot stability and clearance, thanks to the 11 pins per pedal, concave-shaped footbed and thin 17mm profile.Features: Material: Body: Extruded 6061 Aluminium; Axles: 4140 CrMo (Cromoly) Steel Size: 105x105mm with 17mm concave footbed Tuneable: 11 ‘flipPin’ per pedal can be fitted ‘short’ or ‘long’ to fine-tune the grip available Bearing Type: Cartridge bearings Serviceable: High load DU bush and cartridge bearing Axle Size: 9/16” Use: All Mountain, Enduro, Downhill Weight: 430g (Pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt Women's 3.0 Flat Pedal ShoesThe Leatt Women's 3.0 Flat Pedal Shoes are super-burly mountain bike shoes that offer an unshakeable grip of your pedals. And with their tough build, they're easily up to the job of taking on Enduro and Downhill racing and your all-day MTB trail adventures. When you're dropping into technical mountain bike trails, speeding into berms and accelerating up to speed for a big booter, the Women's 3.0 Flat Pedal Shoes keep your feet safe and secure on the pedals, no matter what. The key to the unshakeable grip is the combination of an optimized waffle grip pattern in the pedal area and the top-secret, super-sticky RideGrip Compound. Not only is grip superb, but pedalling efficiency is ruthlessly good too - a rigid pedal area getting your power to the pedals in a flash. Meanwhile, mud-flow channels keep the sole as clear of mud as possible and a flexible toe area helps you when pushing up the hill to session a feature.The upper of the 3.0s are made from water-resistant synthetic leather. Not only will this keep your feet comfier as you splash along muddy trails, but it's also tough too, with protective reinforcements over the toe, heel and Achilles to fend off rock strikes and abrasions. The delicate ankle area, you'll be pleased to see, also gets some extra protection from the sting of crank hits - phew.Inside, the Active Carbon liner promotes fresh feet thanks to its excellent moisture management and anti-bacterial, anti-odour properties. And finally, a low-profile padded tongue keeps comfort levels perfectly tuned while also being weather-resistant and the Leatt compression laces won't come loose on the trail.Features:FlatGrip Sole - Optimized waffle grip pattern in the pedal area for superior pin grip + heel and toe mudflow channels for grip in all weather conditionsRideGrip Compound delivers amazing riding feel in all weather conditions: Sticky Leatt Lab compound sole for ultimate bike controlSynthetic Leather with a synthetic suede toe box - maximum tear, puncture and abrasion resistanceVentilation with a waterproof /breathable membrane on the insideUnique to Leatt compression laces for a tight riding fit that does not come loose when ridingControl Flex Shank: Medium-hard Flex control for great bike feelMidsole: Anti-compression midsole for comfort.Active Carbon moisture-wicking, quick-dry, anti-bacterial, anti-odour material for comfort and hygieneProtection: Inner ankle mid-height protectionWeight: From 770gBuy Leatt Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Minion DHF is a legend of the Maxxis range. Fitted front or rear, the Minion DHF is a corner lover s dream, giving you the confidence to hug the inside line in true Sam Hill style. Designed a solid all-rounder that excels in loose conditions, the slightly ramped centre tread keeps rolling resistance reasonable while the aggressive side knobs keep you hooked up no matter how low you go! Available in a huge range of sizes and compounds, the Minion DHF is a superb choice for your Enduro or Downhill bike.Excellent braking and cornering tractionAggressive cornering knobsDirectional, ramped centre tread Weight from 700gPlease note: All tyres with a width of 2.5 or 2.6 are the WT (Wide Trail) versions..
The radical look and feel of the SRAM X SYNC Eagle Oval chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedalling efficiency, while decreasing friction, noise and wear. -Only Eagle drivetrains are system engineered to give every rider the ultimate 1x experience. -The complete Eagle system — crankset, chainring, chain, shifter, derailleur and cassette — is designed, tested and proven to deliver the ultimate mountain bike drivetrain. -Only Eagle offers the lightest, highest-performing, most durable system our engineers, professional athletes and customers asked for. -Only Eagle is capable of revolutionising the ride for all riders on every kind of terrain. -Eagle technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents.
Performance t-shirt with moisture wicking technology.An instant Fox classic. Made with TruDri® fabric to wick away sweat, the Backbone Tech Tee will dry four times faster than regular cotton. With added odor protection and iconic branding, this gives a great balance of style, comfort, and performance for your active lifestyle. Key Features: Men's performance tee,TruDri® fabric wicks sweat away from the body,Dries 4x faster than basic cotton fabric,Added odor protection,Qualities last for lifetime of the garment,Screen print artwork, . Materials: 85% polyester, 15% cotton drirelease® jersey, 155 g .
DMR Defy Stem (35mm)Even on the most unpredicatble of trails, this stem from DMR will remain secure on your bar. Constructed from durable aluminium, with a top-close clamp mechanism and short reach, this stem is ideal for any mountain bike (MTB) rider and is reliable for long days in the saddle on the most challenging trails. Features:Material: CNC 6061 AlloyClamp Diameter: 31.8mmStack Height: 27mmReach: 35mmRise: 5mmUse: MTBWeight: 176gBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The OMM Bearing Short Sleeve Tee is a technical design that cares for your skin and comfort even in high intensity activity and multi day racing. Crafted with a Coolplus polyester fabric with four-way stretch, it is highly wicking and allows a free range of movement when on the go, while flatlock seams minimise rub points across the shoulders and back. Plus, Polygiene antibacterial and odour technology keeps you dry and fresh and SPF 50 protection ensures harmful rays are kept at bay.
Fast Forward Ryot DT240 Carbon Disc Road WheelsetWhether you're accelerating up to speed or attacking the climbs, this road bike wheelset will always perform thanks to its significant weight, stiffness and aerodynamic improvements.A key feature of the RYOT44 is the LAW Tech aerodynamic rim profile with 44mm depth, 30mm external and 21mm internal widths. LAW is short for 'Laminar Airflow Wing' and has been specially developed to deliver better aerodynamics when using wider tyres by creating a smooth airflow over the rim/tyre interface.It is the wheel of choice for the cyclist that wants to benefit from all features to be as versatile as possible. Beating the competition with a 12% increase on stiffness combined with the aerodynamic advantages you are ready to conquer all roads and crosswinds. As the set only weighs 1520 grams it will also easily guide you uphill yet providing confidence to go fast for the descent.As a tubeless-ready wheelset and the ability to fit tyres up to 42mm the RYOT44 is also a great choice for gravel and multi-surface use.DT Swiss 240 EXP Hub SystemThe DT Swiss hubs in the RYOT44 have been improved with an EXP ratchet system. The hub internals now offers even higher precision and increased stiffness combined with a lower weight. This helps to further increase the performance of the wheel.The RYOT44 is built with DT Swiss' newest DT240 EXP straight-pull centerlock hubs featuring a 36 tooth star ratchet system offering 10 degrees of engagement for quick and crisp shifting, DT Swiss Aerolite and Competition spokes, DT Swiss brass nipples and 12mm thru-axle (12/100mm, 12/142mm) as standard. The RYOT44 is available in matte black and with Shimano/SRAM 10-11 speed, SRAM XDR and Campagnolo 11-12 speed freehub options.In addition to a full 3-year warranty when registered, each wheelset comes with CRP and accessories that include: Padded wheel bag, tubeless rim tape and valves.Fast Forward's rim technologies and unique artisan wheel building techniques are market-leading and WorldTour tested. FFWD Wheels are hand built in The Netherlands and have been ridden to victories in the Spring Classics, each Grand Tour and numerous World Championships.Features: Rims Material: 700c 44mm Tubeless-Ready Full Carbon Clincher Hubs Material: Alloy Spokes Material: Steel Finish: Matte, LAW Tech aerodynamic profile, UV Protected Decals Front Axle: Maxle 12mm Rear Axle: 142x12mm Use: Road Type: Clincher Rims Height: 44mm External Rim Width: External Width: 30mm; Internal Width: 21mm Brake Type: Centrelock Disc Hubs: DT Swiss DT240 EXP 36T, Straight Pull, Centre Lock, Front: 12/100mm, Rear: 12/142mm (QR adapters available) Spokes: DT Aerolite/Competition, DT Pro Lock Spoke Count: Front: 24; Rear: 24 Spoke Lacing Pattern: 2:1 Nipples: Brass Freehub: Separate Shimano/SRAM 10/11-Speed or SRAM XDR 12-Speed options ETRTO: 21-622 Recommended Tyre Width(s): Min: 23mm, Max: 42mm Maximum Tyre Pressure: 120psi; 8.3 bar Accessories: FFWD padded wheel bag, tubeless rim tape and valves Tubeless Ready: Yes 3-year warranty Hand-built in Holland Single or Pair: Pair Maximum Recommended Rider Weight: 265lbs/120kg Weight: 1520 grams +/- 5% (set)Buy Fast Forward Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ultimate shoes for riders looking for comfortable footwear that will give a boost in performance during their winter sessions. Designed with Duratherm Kelvin Gore-Tex® membrane that guarantees protection and insulation, the Extreme XC GTX® shoes also feature excellent breathability with total water and wind block. Technical fitting and maximum comfort in all weather conditions are provided by the additional lining on the tip of the shoe. Key Features Carbon XC12 sole (Stiffness index 12). Patented XFrame® upper. Duratherm Kelvin Gore-Tex® membrane. Anti-abrasion protection surrounds the shoe. New EasyFit Climaflex collar with Gore-Tex Rattler® membrane. 2 loops for easy fitting. Arctic 4Layer insole 360° visibility. 445g
This versatile saddle features a Soft-Tek cover construction, which makes it perfect at handling multiple changes to your riding position as well as the increased pressures associated with racing. One final highlight is its manganese rails, which give it exceptional strength to keep you held firmly in place on the most demanding of terrains. Technologies: Revised Logo: A revised logo, to relive the history and victories of a legendary product. A saddle that has supported and still supports champions such as Mathieu Van Der Poel, Caleb Ewan, Philippe Gilbert and many others. Flat and Boost Shape: The Flite Boost resumes the classic “Flat” shape that has always distinguished the FLITE family to guarantee, together with a more compact shape (248mm of length), the usual performance and maximum stability while pedalling. Superflow: The “Superflow” central cut-out allows you to release the pressure from the central area and benefit from greater comfort when pedalling.
The SQlab 611 Ergowave Saddle was precisely designed to accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingSolid CrMo rails and PU Light foam padding keep weight down to just 244g (12cm size)The 611 Ergowave CrMo features a wave-like shape and raised rear section provides that perfect rearward support and optimal pressure distribution for improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4 mm wider than that of the 612, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. Due to its flex properties, the saddle is most comfortable up to 75 kg. The maximum load should not exceed 90 kg. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave!
Dependable battery powered lights with a modern twist • A great value set of dependable battery powered lights with formidable run times• Replacing the EL-130 front & Omni 3 rear light set this new combination offers greater outputs on both lights and provides a significant saving over buying the same lights separately EL-135 FrontMode: Output RuntimeConstant: 25 Lm 80 hrsFlashing: 25 Lm 320 hrs 2 x AA batteries & FlexTight bracket included ORB Black RearMode: Output RuntimeConstant: 5 Lm 50 hrsFlashing: 5 Lm 100 hrsSlow Flashing: 5 Lm 100 hrs 2 x 2032 batteries included