Endura Xtract Gel Bib Shorts IIOne of the most supportive bib shorts out there on the market, and fully updated for the new season, the Endura Xtract Gel II combines a sumptuously comfortable chamois with fast-wicking fabric. The bibs are made from Xtract™ fabric to help keep you perfectly ventilated and cool when you’re really up against it. The construction is highly intelligent too, keeping seams away from the body where possible, and locking the rest down to do away with chafing over longer distances.The high-quality 400-series pad at the heart of these shorts is a moulded stretch pad in a plush microfibre face fabric for luxurious comfort with strategically positioned gel inserts. The maximum thickness of 15mm with an antibacterial and wicking finish plus dimpled structure improves comfort on pressure points, resulting in exemplary support across a range of distances.Features:Material: 50% Polyester, 35% Polyamide (Nylon), 15% Elastane (Spandex)Ultra-fast wicking Xtract fabric for fast-drying performance400-Series antibacterial multi-density gel pad with micro-wick technologySelected seams flatlocked for toughness and comfortSeam-free inside legRaw edge hem band with silicone print grippersBuy Endura Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.
Kask Mojito3 Matte Road HelmetThe Kask Mojito3 Matte Road Helmet perfectly balances style and protection. The Mojito3 delivers the next level in protection, comfort and sleek design, making it better than ever. The Mojito has always been a leader in both style and performance. But never ones to rest, the Kask design and engineering team have continued to push the boundaries of cycle helmet performance and the result is the Mojito3.Safety. Comfort. Style. Mojito Cubed.The first thing you'll notice is the sleek design of the Mojito is retained, including iconic tail design, but it gets a modern update, with more natural lines and a fresh streamlined look. With this design, Kask have been able to reduce the overall volume of the helmet so it sits more comfortably, but at the same time, ventilation is improved. Blue Tech padding also adds to the fresh feel, allowing sweat to escape easily, leaving you dry as the heat rises. Cool in looks and cool in performance.Despite the reduced volume, protection has been improved quite significantly. Head protection gets a boost thanks to the increased coverage across the rear and front of the helmet - to quote Kask's figures there is a 32% improvement on protection against impacts to the rear, 25% on frontal impacts and 12% on top impacts, making it the safest and best Mojito yet.OctoFit retention systemThe Mojito has always been renowned for its superb fit and comfort, made possible by the innovative OctoFit retention system. This system is retained on the Mojito3. Not only does this system allow you to quickly and easily customise the fit around the circumference of your head, the rear cradle moves vertically, allowing the perfect fit across the back of your skull. Not only is this better for your comfort, in the event of a crash it keeps the helmet in place to afford the very best protection.WG11 Safety TestThe Mojito3 passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Mojito has you covered should you be unfortunate enough to fall from your bike.FeaturesReduced volume, streamlined designImproved ventilationBreathable Blue Tech PaddingOctoFit retention systemPasses WG11 International Safety TestReflective detailsWeighs 230g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Utopia Road Cycling Helmet (Matte Finish-WG11)Fusing smooth aerodynamics, super ventilation and safety, the Kask Utopia Road Cycling Helmet (Matte Finish-WG11) offers unrivalled performance for speed-focused riders. Kask set out to create a cycle helmet suited to the high speeds of racing, with smooth airflow and excellent ventilation as key drivers of the design. Using wind tunnel testing and computational fluid dynamics (CFD) simulation, Kask have succeeded in creating a helmet with unrivalled aerodynamics while retaining incredible ventilation and safety. Compared to the competition the Utopia resulted in a saving of up to 6 watts when riding at 50kph. It may not sound significant but every little bit of saved energy is vital when going for the win.While aerodynamics were the primary concern, Kask didn't overlook ventilation. Using the data from their testing the design and engineering team have been able to optimise airflow so that you can use the Utopia all year round, even in warmer conditions. The design also means reduced draught noises as you ride. WG11 Safety TestThe Utopia passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Utopia has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT Technology - full polycarbonate shell coverVents are designed to improve aerodynamics and coolingQuiet riding experience thanks to the reduced windrush close to riders' earsInternal channelling has been redesigned to further improve the aerodynamic capacityUses the easily adjustable Octo Fit adjustment system5mm Resistex® paddingPasses WG11 International Safety Test and CE-EN-1078Weight: 260 g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Made with an aluminium 6061 Silver Body and featuring a black cage, it gives an excellent hold as you pedal for the podium.
Fox Suspension 38 Float Factory E-Tuned Grip 2 ForkContaining all the revolutionary features of the 36 model only packaged in a super-stout chassis, this electric mountain bike (E-MTB) suspension fork is specifically engineered for modern hard-hitting, long-travel enduro-style riding. Part of Fox Suspension's prestigious Factory Series, it comes race-ready with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance. Designed to exceed the demands of Factory-level riders, this model is also equipped with a lightweight Float EVOL air spring and a GRIP2 damper with Variable Valve Control (VVC) for a high level of tuneability and control. Coming complete with many of the brand's finest technologies, plus Boost axle spacing for increased stiffness and strength, this is a perfect upgrade for enduro riders who want to go big.E-MTB Fork with GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Electric Mount Bike (E-MTB) Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP2 with Variable Valve Control (VVC) Adjustments: High-speed compression (with VVC); Low-speed compression; High-speed rebound (with VVC); Low-speed rebound Travel: 170mm Rake: 44mmTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways we've further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not. Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). 58mm crown diameter to match modern frame shape profiles. 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than 36. Matching 8-click HSC and HSR adjustment on Grip2 forks and X2 shocks.Manufacturer's Part Numbers: 910-21-033 Black 27.5" QR110 170mm 44mm 910-21-032 Black 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Women's Pro SL Short Sleeve JerseyIf you prefer your cycling jerseys to have an understated look but packed with pro-level performance, then look no further than the Endura Women's Pro SL Short Sleeve Jersey.The Women's Pro SL Short Sleeve Cycling Jersey is engineered for speed. With its 'Athletic Fit', you can expect a jersey that is figure-hugging, focusing on keeping fabric flapping to a minimum leading to optimization of your hard-earned power output. Lycra® sleeves offer a snug fit too, but with plenty of flexibility. A raw-cut hem gives a smooth finish and direct silicone print grippers maintain the perfect fit. Moving to performance, the Pro SL makes use of high-quality quick-wicking Italian fabrics. As you raise the pace, chase down race rivals or hunt out KOMs, the excellent breathability and wicking performance prevents discomfort from sweat build-up. And not just that, they’re certified as ‘MadeKind’, giving you confidence that this jersey has a low environmental impact.Endura has given the jersey a triple rear pocket system for storing your gels and spares, with a fourth zipped security pocket for peace of mind with any valuables. And for rides that extend into the hours around sunset, reflective details keep you visible as darkness descends.Features:Materials: 88% Polyester, 12% ElastaneRapid wicking Italian fabrics with UPF50‘MadeKind’ fabric certified as safe for you and the environmentClose fit Lycra® sleeves with raw edge and direct silicone grippersTriple rear pocket system with zipped security pocketSubtle reflective details on back panelsUPF50Athletic no flap fitBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Take to tough, technical terrain with ease in the Inov-8 Women's X-Talon 212 Shoes. Built with 8mm sticky rubber studs, this shoe finds grip on all kinds of varied surfaces from soft terrain to harder ground. The injected EVA midsole is well cushioned and provides plenty of underfoot comfort when navigating rough trails. Protection is provided by the rand that wraps around and covers the shoes upper, keeping stones and debris at bay so you can stay focused and distraction-free. At just 212g, the X-Talon 212 is incredibly fast and flexible, complimenting your foot's natural movement. Ideal for mountains, fells, trails and obstacle courses.
100% RideCamp ShortsBringing together a blend of performance and comfort for All-Mountain mountain biking, the 100% RideCamp Shorts deliver excellent value for hitting the trails for longer.Clean design pairs with essential features for a superb all-around riding short. From mountain bike park laps to all-day cross-country epics and everything in between the RideCamp Shorts can do it all.The DWR finished polyester 2-way mechanical stretch twill fabric is durable and moves with you while on the bike, perfect for carving turns and popping off lips. Secured with a stretch mesh fly and adjustable snap waist closure these shorts stay put from the start of your ride to the end.Plenty of storage is provided with a Velcro® cargo pocket and a zipped pocket to keep your essentials secure.Features:Materials: 100% PolyesterDWR polyester 2-way mechanical stretch twill fabricStretch mesh fly with adjustable snap waist closureVelcro® cargo pocket and zipper pocket for security of essentials(Inner liner not supplied)Buy 100% Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
BeElite Eco Yoga MatThe BeElite Eco Yoga Mat is not only eco-friendly but also friendly on your joints thanks to its 5mm thickness.Suitable for a wide range of post-training recovery routines, the BeElite Eco Yoga Mat has been created to offer you a little extra support and comfort. This extra thick 5mm mat will cushion your joints leaving you to get deeper into your stretches pain-free. Available in three colours, this mat can be easily rolled for storage in between sessions.Made from DeCoto foam, the BeElite Yoga Mat is also good for the environment.DeCoto FoamDeCoto foam is made from renewable biobased products such as bamboo and rice husks as well as recycled PR resins made from recycled plastic. During the production of DeCoto foam, the emissions of CO2 are decreased due to the use of biobased materials compared to traditional construction.Product Size - 61cmx183cmx5mmFeatures:Extra thick 5mm yoga matCushioning on jointsMade from DeCoto foamCarry strap includedUse during your post-training recovery sessions as a comfortable stretching baseBuy BeElite from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak MTX Rear Basket W/Fixer 6This Metal basket mounts to rear rack with the MTX QuickTrack system. With a carry handle and 23 litre capacity this basket is perfect for shopping or other errands. Features: Bag Attachment: MTX System (Fixer 6) Capacity: 23.44L Compartments: One main Material: Welded Metal Wire Size: 40.5 x 33.5 x 24.1cm Weight: 1600gBuy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Keep your reservoir clean with the Osprey Hydraulics™ Cleaning Kit. Included with the kit is a ladder expander that holds the reservoir open to dry after use. Two specially designed brushes, one for the reservoir and one for the hose keep all the corners and channels in top condition. Everything you need for a happy reservoir comes packaged in a reusable cord lock mesh bag.Key Features:Expander drying ladder and cleaning brushes to care for your Hydraulics™ Reservoir,Compatible with Hydraulics™ and Hydraulics™ LT Reservoir.
Key Features: The BNS TECH-2 is constructed from an advanced, high-performance fibre polymer compound Complete design facelift & technical upgrading including new lightweight rear and chest padding and updated chinplate design., New graphics corresponding to new MX protection collection., Structural integrity and frame strength against heavy impact energies during a crash., Ultra-lightweight performance and comfort while riding., Less weight than its predecessors.Resilience to low temperatures, below 0°C., The BNS TECH-2 is designed to provide a customizable, secure and personalised fit with the SAS (Size Adapter System) for a versatile fitment in size ranges XS-M and L-XL., The Lycra®-laminated foam padding kits are adaptable and the interchangeable EVA foam pads allow compatibility with body protection systems., The lightweight Strap System can be worn over or under the jersey., The BNS TECH-2 incorporates a bio-organic engineering design for superb ergonomics., Rear stabilizer promotes PFR (Progressive Force Relief) and dissipates energy loads by transmitting them across the back and shoulders and away from spine (thoracic vertebrae), and is connected to the frames via pivot key., Frame construction promotes improved contact with helmet during impact – including rear support edge that fits closer to the body, extra width to account for different helmet sizes and raised chest to reduce hyper-flexion., Innovative quick-release locking system for rapid and efficient fitting/removal offers secure and convenient closure., Compressed EVA foam compound padding to distribute the impact force over the widest area, yet remain lightweight..