Brand-X Rear Mountain Bike Hub Boost ConversionThis conversion kit includes two axle spacers, a 6-bolt rotor spacer and rotor bolts for straightforward installation. Designed to work with most 142mm non-Boost hubs, it is also recommended to check with your specific hub manufacturer for full compatibility. This kit is specifically developed to allow a 142x12mm hub to be converted to 148x12mm Boost spacing. Genuine Brand-X spare parts.Please note: Your wheel may need redished to work in a Boost frame.Features: Compatibility: Most 142mm non-Boost hubs Includes: 2x axle spacers, 6-bolt rotor spacer and rotor bolts Conversion: 142x12mm to 148x12mm Manufacturer's Part Number: BXRBCBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Trail Wheelset Front QR End CapsThis end cap set includes two front QR end caps for use on the Brand-X Trail front wheel. Genuine Brand-X spare parts.Fitment Instructions: Pull off old end cap, use pliers if some extra grip is required. Push new end cap on the hub and it is now ready to fit to your bike.Features: Compatibility: Front QR end caps for Brand-X Trail wheel Single or Pair: Pair Manufacturer's Part Number: BXTWFQRECBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Trail Wheelset Rear QR End CapsThis end cap set includes two rear QR end caps for use on the Brand-X Trail rear wheel. Genuine Brand-X spare parts.Fitment Instructions: Pull off old end cap, use pliers if some extra grip is required. Push new end cap on the hub and it is now ready to fit to your bike.Features: Compatibility: Rear QR end caps for Brand-X Trail wheel Single or Pair: Pair Manufacturer's Part Number: BXTWRQRECBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The lenses are anti fog and anti scratch and come as a 3 pack- clear, low light yellow and dark. The lenses come film wrapped to ensure they remain fresh and scratch free until you're ready to ride..
Brand-X Classic Bar EndsThe Brand-X quill classic bar end is 3D forged from 1 piece of 6061-T6 Aluminium and features a gentle curve for a comfortable riding position. They can be set at any angle and will fit securely on all handlebars.Features: Length: 140mm Barbore: 22.2mm Diameter of bar end: 22.6mm Weight: 140 grams per pair Finish: Sand Blasted and anodised Colour: BlackBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Trail 12mm Front End CapsThis end cap set includes two front 12mm end caps for use on the Brand-X Trail front wheel. Ideal for replacing your worn out existing end caps or for giving your front wheel a refresh. Genuine Brand-X spare parts.Fitment Instructions: Pull off the old end cap, use pliers if some extra grip is required. Push new end cap on the hub and it is now ready to fit to your bike.Features: Use: Mountain Bike (MTB) Compatibility: Front 12mm end caps for Brand-X Trail wheel Single or Pair: PairBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Enduro Mountain Bike StemCreated from a 3d forged aluminium construction, this stem is highly durable and stiff, yet also incredibly lightweight, so you can tackle whatever challenges you meet on the trails. Designed to be used alongside a bar with a clamping zone of 31.8mm, it is available in lengths of 40, 50 and 60mm.The Flip/Flop design allows the user to easily run it upside down to help keep the front end low; ideal for a 29” or 27.5” bike, where the front tends to be higher than you may want.Features:Sizes: 40mm, 50mm, 60mmRise: 3 degreesClamp Diameter: 31.8mmMaterial: 3D Forged AluminiumFinish: AnodisedColour: BlackEN-M ApprovedWeight: 114g (40mm), 131g (50mm) and 134g (60mm)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Integrated Sealed Headset (Campy)The Brand-X Integrated Campy Headset uses sealed angular contact bearings and has been designed to offer superior reliability, quality and performance at an exceptional price point. The sealed integrated headset fits directly into the frame resulting in an easy and hassle free instalment.Features: Campagnolo Compatible Angular Contact Sealed Bearings Height: 9.4 ± 1mm Material: CNC Machined Alloy SHIS Norm: IS42/28.6 | IS42/30.0 Includes: Top cap and Star Nut Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed for use with the common 31.8mm handlebar diameter, the Brand-X MTB Stem features a flip/flop design. This enables you to mount it in a comfortable upright position or a lower position for ultimate control. This alternative lower position makes it ideal for use on bikes with 27.5” (650b) or 29” wheels that have a higher front end.
Designed for use with the now common 31.8mm handlebar size, you can mount the Brand-X Road stem two ways. You can mount it in its relaxed 7-degree rise for a comfortable endurance position, or flip it over and mount it upside down to obtain a lower, more aerodynamic race position. It’s finished with subtle styling and an anodised coating, meaning it will compliment any bike.
Designed for use with the common 31.8mm bar thickness, you can install the Enduro stem in two ways. Run it in its standard upright position for a more relaxed ride, or flip it over and run it the other way for a more aggressive position. This lower option makes it ideal for use with modern MTB’s larger 27.5” or 29” wheels.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Road Racing Classic HandlebarThese Brand-X Road Racing Classic handlebars feature a traditional bend with a long 100mm reach and deep 138mm drop. Manufactured from 6061 double-butted aluminium with a shot peened finish for enhanced fatigue resistance and durability. An anodized black finish with subtle graphics provides an understated stealthy appearance. Additional features include recessed channels for cable routing and centre markings for ease of set up.Features: Traditional bend: 100mm reach &138mm dropMaterial: 6061 Double Butted AluminiumFinish: Shot-peened and anodised blackEN-R ApprovedColour: BlackWidth: 40cm, 42cm, 44cm Clamp Diameter: 31.8mm Weight: 319 grams (42cm)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
This conversion kit includes two axle spacers, a 6-bolt rotor spacer and rotor bolts for straightforward installation. Designed to work with most 142mm non-Boost hubs, it is also recommended to check with your specific hub manufacturer for full compatibility. This kit is specifically developed to allow a 142x12mm hub to be converted to 148x12mm Boost spacing. Genuine Brand-X spare parts. Please note: Your wheel may need redished to work in a Boost frame. Manufacturer's Part Number: BXRBC Black Option 1 142x12mm to 148x12mm
Designed for dependability, this tapered headset comes equipped with a hard-wearing 6061 alloy construction for an excellent balance of strength and durability. Brand-X has also put this model through a CNC forging and machining process, which removes any unnecessary excess material, while still maintaining maximum strength. As a result, it offers an excellent strength-to-weight ratio. Another highlight is its angular contact sealed bearings that ensure smooth and dependable performance in all weather conditions. Comes complete with a top cap and star nut. Manufacturer's Part Number: BXINTIS42IS5245X45TH Black IS42 / IS52 45x45 Deg