Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
The Brand-X Ascend II is an externally routed dropper seatpost that offers excellent performance and reliability without breaking the bank. Tweak your saddle height for what lies ahead and tackle the trail in comfort.Material: T6-6061 AluminiumBar mounted paddle style remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismLength: 400mmTravel: 125mm (27.2mm = 105mm travel)Cable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 610g (30.9mm) w/o cable and paddle shifter (90g)Building on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic paddle style lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Please Note: The 31.6 and 30.9 diameter options come with the 1x shifter style remote shown in the first image and are not suitable for use on bikes with 2X or 3X front gearing. The 27.2 diameter post comes with a 22.2 lever that is compatible with 2X or 3X front gearing.
The Ascend Dropper Seatpost offers excellent performance and reliability without breaking the bank. Its compatible with bikes that can use an internally routed dropper. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Material: AL7075-T651Bar mounted shifter style remote leverInfinitely adjustableCable operatedInternal routing onlyLinkage mechanism eliminates any outer cable pullZero Offset Head typeOne Piece head/Upper ShaftMicro Adjust clamping mechanism30.9mm or 31.6mm Diameter410mm/480mm Length120mm or 150mm TravelCable Length: 1.5mSand Blasted and Hard Anodised Black2 Year WarrantyWeight: 550g W/O Cable and Shifter (31.6mm, 120mm)The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Please note that it cannot be converted to external cable actuated.
The Brand-X quill stubby bar end is 3D forged from 1 piece of 6061-T6 Aluminium and features a Knurled section for added grip. They can be set at any angle and will fit securely on all handlebars.Length: 85mmBar bore: 22.2mmDiameter of bar end: 22.6mmWeight: 60 grams eachFinish: Sand Blasted and anodisedColour: Black
Introducing the Brand-X Ascend Paddle Lever Kit (2x-3x Gears). This ergonomic paddle style remote lever is designed to sit next to your front shifter, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.Material: AL7075-T651Bar mounted paddle style remote leverCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised black
Brand-X's Ascend CX Paddle Lever Kit includes the paddle lever, cable outer, cable inner, guide pipe with barrel adjust, cable end cap and cable barrel for post fitment. This kit allows the easy replacement of the ergonomic paddle lever.Material: T651-7075 AluminiumTo Fit: 31.8mm handlebar diameterBar mounted paddle style remote leverLinkage mechanism eliminates any outer cable pullCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can be engaged/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can be engaged/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
The Brand-X stem is 3d Forged from Aluminium to produce a stem which is strong and stiff yet still lightweight. It is designed to use a bar with a clamping zone of 31.8mm and is available in lengths from a 90mm to 120mm. The 7 Degree rise design will give you the option of a high (for comfort) or low (aerodynamic) handlebar position.Sizes: 90, 100, 110, and 120mm LengthsRise: 7 DegreesClamp Diameter: 31.8Material:3D Forged AluminiumFinish: AnodisedColour: BlackEN-M ApprovedWeight: 162 grams (110mm)
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
The Brand-X layback 6061 Seatpost is manufactured from lightweight 6061-T6 Aluminium for strength, stiffness and durability. The Head and clamp are offset by 15mm and features a micro-adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black anodised finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Length: 400mmOffset: 15mmSizes: 27.2, 30.9 and 31.6mmMaterial: 6061-T6 AluminiumFinish: Turned and Anodised shaft/Anodised headColour: BlackIncremental height markingsEN-M ApprovedWeight: 320 grams (31.6mm)
The Brand-X layback 6061 Seatpost is manufactured from lightweight 6061-T6 Aluminium for strength, stiffness and durability. The Head and clamp are offset by 15mm and features a micro-adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black anodised finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Length: 400mmOffset: 15mmSizes: 27.2, 30.9 and 31.6mmMaterial: 6061-T6 AluminiumFinish: Turned and Anodised shaft/Anodised headColour: BlackIncremental height markingsEN-M ApprovedWeight: 320 grams (31.6mm)
The Brand-X carbon inline seatpost is manufactured from a lightweight forged 6061-T6 Aluminium head and clamp which is bonded to a lightweight UD carbon shaft. The head features a micro adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Finish: Smooth lacquerIncremental height markingsEN-M ApprovedOffset: 22mmMaterial: UD Carbon Fibre shaft and 6061-T6 Aluminium headLength: 350mmWeight: 265 grams (31.6mm)
The Brand-X carbon inline seatpost is manufactured from a lightweight forged 6061-T6 Aluminium head and clamp which is bonded to a lightweight UD carbon shaft. The head features a micro adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Finish: Smooth lacquerIncremental height markingsEN-M ApprovedOffset: 22mmMaterial: UD Carbon Fibre shaft and 6061-T6 Aluminium headLength: 350mmWeight: 265 grams (31.6mm)
The Brand-X stem is 3d Forged from Aluminium to produce a stem which is strong and stiff yet still lightweight. It is designed to use a bar with a clamping zone of 31.8mm and is available in lengths from a 90mm to 120mm. The 7 Degree rise design will give you the option of a high (for comfort) or low (aerodynamic) handlebar position.Sizes: 90, 100, 110, and 120mm LengthsRise: 7 DegreesClamp Diameter: 31.8Material:3D Forged AluminiumFinish: AnodisedColour: BlackEN-M ApprovedWeight: 162 grams (110mm)
The Brand-X stem is 3d Forged from Aluminium to produce a stem which is strong and stiff yet still lightweight. It is designed to use a bar with a clamping zone of 31.8mm and is available in lengths from a 90mm to 120mm. The 7 Degree rise design will give you the option of a high (for comfort) or low (aerodynamic) handlebar position.Sizes: 90, 100, 110, and 120mm LengthsRise: 7 DegreesClamp Diameter: 31.8Material:3D Forged AluminiumFinish: AnodisedColour: BlackEN-M ApprovedWeight: 162 grams (110mm)