Brand-X Ascend Dropper Seatpost (100, 125 & 150)Precisely engineered to bring you fast and smooth operation on the trails, the Ascend dropper post will get you into the optimum riding position in a flash. This means you'll be primed for the upcoming terrain so you can attack a climb or descent without having to stop to change your saddle position. Designed for MTB frames with dropper post internal routing, it will give a clean look to your bike too.Ergonomic Dropper SeatpostThis mountain bike dropper seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. It's ideally suited for those running a 1x chainring transmission without a front derailleur.Your bike's frame must have internal dropper post routing for seamless compatibility with this dropper seatpost. To eliminate cable movement/pull, the smooth operating Brand-X Ascend 120mm & 150mm MTB Dropper Seatpost has been cable actuated at the end of the seatpost to deliver consistent performance.Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here.Reasons to Buy: Incredibly fast and smooth operation. Gives you an optimum riding position. Internal cable routing for a clean look. Effortlessly remote operated.Features: Material: AL7075-T651 Diameter: 30.9mm or 31.6mm Size: 410mm or 480mm Length/Travel: 100mm, 120mm or 150mm Cable Length: 1.5m Finish: Sand Blasted and Hard Anodised Black Warranty: 2 Years Compatibility: Frames with dropper post internal cable routing only Remote Included: Yes, bar mounted shifter style remote lever Infinitely adjustable Cable operated Internal routing only Linkage mechanism eliminates any outer cable pull Zero Offset Head type One Piece head/Upper Shaft Micro Adjust clamping mechanism Rider Weight: Min: 50-55kg; Max: 120kg Weight: 550g (without cable and shifter, 31.6mm)Please Note: The "Size" information relates to the seatpost's overall length. To know which size to buy, measure your current seatpost's length and diameterMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 100, 125 Service Guide.Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Manufacturer's Reference Codes: 120mm 31.6mm 410mm: BRNDXDRP01412316120; 120mm 30.9mm 410mm: BRNDXDRP01412309120; 150mm 31.6mm 480mm: BRNDXDRP01480316150; 150mm 30.9mm 480mm: BRNDXDRP01480309150; 125mm 30.9mm 412mm: BRNDXDRP0123412309125; 150mm 30.9mm 459mm: BRNDXDRP0123459309150; 125mm 31.6mm 412mm: BRNDXDRP0123412316125; 150mm 31.6mm 459mm: BRNDXDRP0123459316150Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Brand-X 11 speed MTB cassette is the perfect replacement for your 11 speed cassette. Available in both 11-42t and 11-46t options depending on your ratio requirement. The cassette uses a standard Shimano HG spline and its high tensile steel cogs are mounted on a 7075 alloy spider for maximum durability while keeping weight to a minimum. The tooth profile is also optimised to aid gear changes and reduce noise.
Brand-X 11 Speed MTB CassetteBenefitting from high tensile steel cogs on a 7075 alloy spider, this versatile cassette offers an excellent balance of stiffness and reliability without adding any excess grams to your mountain bike (MTB) or touring bike. Brand-X has also kitted out this model with a standard Shimano HG spline and a tooth profile that's optimised to aid gear changes and reduce noise. As a result, it's a great choice of upgrade for replacing your old 11 speed cassette and enjoying smooth performance wherever your ride takes you.Features: Material: High Tensile Steel cogs on a 7075 Alloy Spider Use: Mountain bike (MTB), Touring bike Ratio: 42T Option: 11-13-15-17-19-21-24-28-32-36-42; 46T Option: 11-13-15-18-21-24-28-32-36-40-46 Freehub Compatibility: Shimano type 9-11 speed freehubs Chain Compatibility: All 11 speed chains Weight: 42T Option: 453g; 46 Option: 560gBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X 11 Speed MTB CassetteBenefitting from high tensile steel cogs on a 7075 alloy spider, this versatile cassette offers an excellent balance of stiffness and reliability without adding any excess grams to your mountain bike (MTB) or touring bike. Brand-X has also kitted out this model with a standard Shimano HG spline and a tooth profile that's optimised to aid gear changes and reduce noise. As a result, it's a great choice of upgrade for replacing your old 11 speed cassette and enjoying smooth performance wherever your ride takes you.Features: Material: High Tensile Steel cogs on a 7075 Alloy Spider Use: Mountain bike (MTB), Touring bike Ratio: 42T Option: 11-13-15-17-19-21-24-28-32-36-42; 46T Option: 11-13-15-18-21-24-28-32-36-40-46 Freehub Compatibility: Shimano type 9-11 speed freehubs Chain Compatibility: All 11 speed chains Weight: 42T Option: 453g; 46 Option: 560gBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X 12 Speed MTB CassettePerfectly suited for the rigours of modern mountain bike (MTB) riding, this 12 speed cassette is equipped with high tensile steel cogs on a 7075 alloy spider for maximum strength and durability. Brand-X has also kitted out this trail-ready model with a standard Shimano HG spline and a tooth profile that has also been optimised to aid gear changes and reduce noise. Available in both 11-50t and 11-52t options depending on your ratio requirement, this is a great choice of upgrade for replacing your old 12 speed MTB cassette and benefitting from smooth and consistent performance.The 11-50 cassette option is fully compatible with SRAM and Shimano, while the 11-52t cassette option is compatible with SRAM drivetrains.Features: Material: High Tensile Steel cogs on a 7075 Alloy Spider Use: Mountain bike (MTB) Ratio: 50T Option: 11-13-15-17-19-21-24-28-32-36-42-50; 52T Option: 11-13-15-18-21-24-28-32-36-40-46-52 Freehub Compatibility: Shimano HG freehubs Chain Compatibility: 12 Speed chainsBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X 12 Speed MTB CassettePerfectly suited for the rigours of modern mountain bike (MTB) riding, this 12 speed cassette is equipped with high tensile steel cogs on a 7075 alloy spider for maximum strength and durability. Brand-X has also kitted out this trail-ready model with a standard Shimano HG spline and a tooth profile that has also been optimised to aid gear changes and reduce noise. Available in both 11-50t and 11-52t options depending on your ratio requirement, this is a great choice of upgrade for replacing your old 12 speed MTB cassette and benefitting from smooth and consistent performance.The 11-50 cassette option is fully compatible with SRAM and Shimano, while the 11-52t cassette option is compatible with SRAM drivetrains.Features: Material: High Tensile Steel cogs on a 7075 Alloy Spider Use: Mountain bike (MTB) Ratio: 50T Option: 11-13-15-17-19-21-24-28-32-36-42-50; 52T Option: 11-13-15-18-21-24-28-32-36-40-46-52 Freehub Compatibility: Shimano HG freehubs Chain Compatibility: 12 Speed chainsBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Brand-X 12 speed MTB cassette is the perfect replacement for your 12 speed cassette. Available in both 11-50t and 11-52t options depending on your ratio requirement. The cassette uses a standard Shimano HG spline and its high tensile steel cogs are mounted on a 7075 alloy spider for maximum durability while keeping weight to a minimum. The tooth profile has also been optimised to aid gear changes and reduce noise. The 11-50 cassette option is fully compatible with SRAM and Shimano, while the 11-52t cassette option is compatible with SRAM drivetrains.
The head features a micro adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.
Brand-X Carbon Inline SeatpostThe Brand-X Carbon Inline Seatpost is incredibly lightweight, created from forged 6061-T6 Aluminium head and clamp which is bonded to a lightweight Uni-Directional (UD) carbon shaft. The head features a micro-adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible.A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Features:Offset: 0mmMaterial: UD Carbon Fibre shaft and 6061-T6 Aluminium headFinish: Smooth lacquerIncremental height markingsEN-M ApprovedWeight: 260 grams (31.6mm)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The head is offset by 22mm and features an adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.
This ergonomic shifter style remote lever is designed to be positioned where your front shifter would normally sit. This means that this kit is ideally suited for riders who are using a 1xchain ring set up, without a front derailleur. This stunning lever kit is compatible with all the Brand-X Ascend dropper posts and other cable actuated posts for a smooth and effortless operation. Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. To top it off, the cables can be installed at either end so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post. Please Note: This particular lever kit is only compatible with Shimano hydraulic brake levers with I-Spec II fitment and does not include a handlebar mounting collar.
Brand-X Carbon Layback SeatpostThe Brand-X carbon layback seatpost is manufactured from a lightweight forged 6061-T6 Aluminium head and clamp which is bonded to a lightweight UD carbon shaft. The head is offset by 22mm and features an adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible.A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Features: Length: 350mm Offset: 22mm Sizes: 27.2 or 31.6mm Material: UD Carbon Fibre Finish: Smooth lacquer Colour: Black Incremental height markings EN-M Approved Weight: 265 grams (27.2mm)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Carbon Layback SeatpostThe Brand-X carbon layback seatpost is manufactured from a lightweight forged 6061-T6 Aluminium head and clamp which is bonded to a lightweight UD carbon shaft. The head is offset by 22mm and features an adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible.A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Features: Length: 350mm Offset: 22mm Sizes: 27.2 or 31.6mm Material: UD Carbon Fibre Finish: Smooth lacquer Colour: Black Incremental height markings EN-M Approved Weight: 265 grams (27.2mm)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Carbon Inline SeatpostThe Brand-X Carbon Inline Seatpost is incredibly lightweight, created from forged 6061-T6 Aluminium head and clamp which is bonded to a lightweight Uni-Directional (UD) carbon shaft. The head features a micro-adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible.A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Features:Offset: 0mmMaterial: UD Carbon Fibre shaft and 6061-T6 Aluminium headFinish: Smooth lacquerIncremental height markingsEN-M ApprovedWeight: 260 grams (31.6mm)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Ascend Lever Kit V2 - (1 x Gears) I-Spec This ergonomic shifter style dropper remote lever is designed to be positioned where your front shifter would normally sit. This means it's perfectly suited for riders who are using a 1x chain ring set up, without a front derailleur. This superb lever kit is compatible with all the Brand-X Ascend dropper seatposts and other cable actuated posts for a smooth and effortless operation.Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. Plus, with this model, it neatly combines with Shimano I-Spec II brake levers to free up space on your bars and give a clean look. To top it off, the cables can be installed at either end, so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post. Please Note: This particular lever kit is only compatible with Shimano hydraulic brake levers with I-Spec II fitment and does not include a handlebar mounting collar.Features: Material: 6061-T6 AluminiumFinish: Sand blasted and hard anodised black Compatibility: Shimano I-Spec II Diameter: 22.2mm Cable Length 1.5m Cable Housing: 1500mm (inner cable 1710mm) I-Spec II mounted shifter style remote lever Weight: 40.7g (excluding the cable 64g)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chainring set up, without a front derailleur.V2 Upgrade:Material: AL7075-T651 ,Bar mounted shifter style remote lever,Cable operated ,Cable Length: 1.5m ,Finish: Sandblasted and hard anodized black ,2 Year Warranty.V2 I-Spec Upgrade:Material: AL7075-T651 ,Shimano I-Spec mount shifter style remote lever ,Cable operated ,Cable Length: 1.5m ,Finish: Sandblasted and hard anodized black ,2 Year Warranty.
The Brand-X carbon inline seatpost is manufactured from a lightweight forged 6061-T6 Aluminium head and clamp which is bonded to a lightweight UD carbon shaft. The head features a micro adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily. Key Features: Finish: Smooth lacquer,Incremental height markings,EN-M Approved,Offset: 22mm,Material: UD Carbon Fibre shaft and 6061-T6 Aluminium head,Length: 350mm,Weight: 265 grams (31.6mm).
The Brand-X carbon inline seatpost is manufactured from a lightweight forged 6061-T6 Aluminium head and clamp which is bonded to a lightweight UD carbon shaft. The head features a micro adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Finish: Smooth lacquerIncremental height markingsEN-M ApprovedOffset: 22mmMaterial: UD Carbon Fibre shaft and 6061-T6 Aluminium headLength: 350mmWeight: 265 grams (31.6mm)
The Brand-X carbon inline seatpost is manufactured from a lightweight forged 6061-T6 Aluminium head and clamp which is bonded to a lightweight UD carbon shaft. The head features a micro adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.Finish: Smooth lacquerIncremental height markingsEN-M ApprovedOffset: 22mmMaterial: UD Carbon Fibre shaft and 6061-T6 Aluminium headLength: 350mmWeight: 265 grams (31.6mm)
Introducing the Brand-X Ascend Dropper Seatpost shifter style lever kit. The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL6061-T6Shimano I-Spec mount shifter style remote leverCable Length: 1.5mWeight: 40.7g (excluding cable)Adjustment: +10 degrees angle range and +7mm horizontal adjustmentFinish: Sand blasted and hard anodised blackWarranty: 2 Year