DMR Axe Bottom Brackets to fit the below bottom bracket standards. Both press fit BB's require the specific BB tool. Before fitting the BB92 BB, you must check your frame is within the required tolerances using the BB92 gauge. Please Note: The axe crank uses a specific 30mm bottom bracket axle and is only compatible with the Axe Bottom Bracket. Other 30mm crank systems and BB's are not cross compatible.BB92 pressfit68/73mm BSA threadedPlease note: Image for illustration purposes only
Refresh and restore your DMR Vault pedals with this service kit.2x Sealed bearings2x Plain bearings1x M6x0.75 5 deep right hand thread1x M6x0.75 5 deep left hand thread2x End cap: M14x1x112x Washers2x Internal Rubber SealsDMR Vault Pedal Spares and Service Kit includes:2x Sealed bearing number: 686ZZ - 6mm Ø ID (Internal Diameter) 13mm Ø OD (Over All Diameter) 5mm Width2x Plain bearing (bushing) 12mm Ø ID (Internal Diameter) 14mm Ø OD (Over All Diameter) 12mm WidthNuts:1x M6x0.75 5 deep right hand thread (left hand pedal) (to be fitted with a 8mm socket)1x M6x0.75 5 deep left hand thread (right hand pedal) (to be fitted with a 8mm socket)2x End cap: M14x1x112x Washer: 6mm Ø ID (Internal Diameter) 9mm Ø OD (Over All Diameter) 1mm Width2x Internal Rubber Seals
The DMR Axe LE brings a higher level of finish with laser etched graphics to the legendary crank that is a triple winner of MBUK s best MTB crank. The DMR Axe LE crank features Hollowform technology in the forged crank arms achieving unrivalled stiffness without a weight penalty. The DMR Axe LE is strong and versatile enough to fit any All Mountain, Enduro or DH set up.Lightweight 790g (Arms, BB and Direct mount Blade 34t)ø30mm axle for unrivalled stiffness176mm Q-FactorSRAM style direct mount compatiblePlease Note; Chainring not includedGlobally proven on the World Cup DH circuit with DMR athlete Brendan Fairclough and with international flow-rider sensation Olly Wilkins, plus DMR s own team riders Ben Deakin and Jono Jones.The DMR Axe LE features a sturdy 30mm axle to ensure there is no flex between your crank arms. These cranks are supplied as crank arms only so that you can assemble your cranks to your specification. We recommended DMR Blade Rings which are available in all common sizes, along with Boost and Standard chain line options. A Direct Mount spider is available for 2x set ups.The DMR Axe LE cranks must be fitted with a DMR Axe BB. These DMR cranks have the strength needed for the biggest DH hits. Combined with the weight of a race ready Enduro crank DMR have created what they believe to be the best crank out there for mountain bikes. Using Hollowform arms and a 30mm axle they have achieved unrivalled stiffness and strength without a weight penalty.
The DMR Vault V2 Pedal is a much-loved classic flat pedal that s ideal for all types of mountain bike riding. They are however especially liked by all mountain and downhill riders due to their large platform, easy servicing and outstanding levels of grip.Lightweight at 430g per pairTough & durable extruded 6061 Aluminium & 4140 CroMo steel axlesServiceable high load DU bush & cartridge bearingReplaceable pinsThe large platform gives you tremendous stability, a huge amount of grip and excellent mud clearance thanks to the open body design. Constructed from tough 6061 aluminium these pedals are the epitome of tough.The pins are reversible, so you can customise these pedals to your liking; from long and sharp to short and more rounded. A sealed bearing keeps out all that muck and wet that you ll inevitably encounter while servicing is just a case of removing a 6mm dust cap and applying fresh grease.The DMR Vault V2 are a highly durable, light flat pedal that offers almost unrivalled grip and the only choice left to make is what colour you d like them in.
The DMR Vault V2 Pedal is a much-loved classic flat pedal that s ideal for all types of mountain bike riding. They are however especially liked by all mountain and downhill riders due to their large platform, easy servicing and outstanding levels of grip.Lightweight at 430g per pairTough & durable extruded 6061 Aluminium & 4140 CroMo steel axlesServiceable high load DU bush & cartridge bearingReplaceable pinsThe large platform gives you tremendous stability, a huge amount of grip and excellent mud clearance thanks to the open body design. Constructed from tough 6061 aluminium these pedals are the epitome of tough.The pins are reversible, so you can customise these pedals to your liking; from long and sharp to short and more rounded. A sealed bearing keeps out all that muck and wet that you ll inevitably encounter while servicing is just a case of removing a 6mm dust cap and applying fresh grease.The DMR Vault V2 are a highly durable, light flat pedal that offers almost unrivalled grip and the only choice left to make is what colour you d like them in.
The DMR Vault Midi V2 Pedals provide another great flat pedal option for riders with the Vault Midi being a scaled down version of DMR s award winning classic Vault pedal.Platform size 95mm x 104mmOnly 420g per pairSlim 17mm concave foot bedLow profile design for better clearanceThe Vault Midi V2 has the same pin layout and profile as its bigger brother but is 10% smaller making it ideal for those with smaller feet or alternatively those who prefer a smaller platform.They have been constructed from tough lightweight extruded 6061 aluminium with 4140 CroMo steel axles giving excellent durability. They have 11 flip pins per pedal which can be flipped to have the pins long or short allowing you to fine tune these pedals to your preference. They are also fully serviceable meaning you can keep them in full working order yourself with minimal fuss.
The DMR Defy Stem is a top choice of hard-hitting riders around the world. Built to last with a low stack height and top-close clamp design, the Defy is built to take a beating without weighing as much as doorstop.Super strong CNC-machined 6061 aluminium constructionUltra low 27mm stack height is perfect for short steerer tubes or riders who want bars lowerIncludes matching DMR stem capReasonably light at 176g despite it's massive strengthBuilt to withstand the abuse of all-mountain, enduro and freeride use, the Defy is built from CNC-machined 6061 aluminium and features an ultra low 27mm stack height. Not only does this allow riders to get their bars as low as possible if desired, it also opens the door for forks with short steerer tubes; if other stems are too tall, the Defy is worth a look! Despite the massive strength, the Defy weighs 176g, so it won't add a ton of weight to your bike. With a stylish DMR stem cap included, the Defy is tough, versatile and great value.
Introducing the new DMR V11 Pedals. For those that favour the durability, compliance and affordability of composite pedals, the new benchmark choice from DMR is here.Large platform area 105mm x 105mm 19mm thickLow profile body with concave foot bedTuneable pins with outer Moto Pins for serious gripStrong 4140 Cro-Mo black steel axles (9/16") with 6mm hex key fittingFully serviceable for long lifeWeight 450g/pairThe V11 is moulded with the same proven shape as the multi award-winning Vault pedal, providing a huge platform with DMR s unique concave shape that allows your foot to sit deep into the centre for supreme grip. The V11 s durable glass reinforced nylon body features eleven replaceable steel pins each side for rock solid grip. All pins are secured with captive locknuts for ultimate durability. Outer pins are Vault Moto pins that sink deep into your shoe, keeping your foot well and truly planted. The V11 is fully rebuildable with the same proven internals as DMR Vault pedals, guaranteeing ride after ride with no-nonsense performance.
The DMR Defy50 mtb stem is the perfect stem for your Trail/All mountain build. It features a low stack height, Top-Close clamp design with 50mm reach. The Defy50 stem has a wide clamping area for bar stability and an internal steerer clamp to keep your knees safe out on the trail. The body of the Defy50 has been slimmed down to shave 40g off the weight without sacrificing the wide bar clamping area, internal collet steerer clamp and strength.ø31.8mm ClampCNC 6061 AlloyTop-Close clamp design31mm Stack height50mm Reach189gStem cap included
Based around the world renowned SPD technology we have engineered the most adaptable caged-clip system on the market. The DMR V-Twin mtb clipless pedal offers a huge number of different grip and feel options. Using our range of pins paired with a unique Nylon “bumper” and Metal Shim feature, the pedal can be customised to optimise your float and preferences and improve your ride experience.
Set Contains: 16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, strud is 4.5mm using either a 5mm spanner or 2mm allen wrench to secure. 28 x long pins (for use in the outside edge of your pedals) overall length 12.5mm, thread is M4x0.7x8, strud is 4.5mm using either a 5mm spanner or 2mm allen wrench to secure. 2mm allen wrench included
Cartridge bearings in the roller keeping it working smoothly. Bolts into your vertical drop-out and has a sizeable amount of adjustment to set it up the way you want.
Suitable for a number of uses, originally designed to convert a top pull frame into a bottom pull, it can also be used as a lower mudguard mounting point for frames without a chainstay bridge, as well as adapting a cyclo cross frame to be able to take two water bottles.
It has the same concave footprint and narrow profile that DMR pedals are known for, whilst spinning on their new Dual DU bush system.
Over its 18 years of production the V12 has become recognized as the benchmark for flat pedal performance. For 2014 we took our iconic V12 body design and redefined it. Here’s how it’s better than before: LARGER PLATFORM AREA The new V12 [Mg] offers 10% more surface area than the classic shape. This means better grip and also support for rougher conditions and bigger hits. LOWER PROFILE At just 16mm deep the V12 [Mg] is as slim as we could go whilst still retaining our legendary concave feel. LIGHTER WEIGHT There is a 20% weight saving from the last V12 [Mg] weighing just 350g.
Over its 18 years of production the V12 has become recognized as the benchmark for flat pedal performance. For 2014 we took our iconic V12 body design and redefined it. Here’s how it’s better than before: LARGER PLATFORM AREA The new V12 offers 10% more surface area than the classic shape. This means better grip and also support for rougher conditions and bigger hits. LOWER PROFILE At just 16mm deep the V12 is as slim as we could go whilst still retaining our legendary concave feel. LIGHTER WEIGHT There is a 20% weight saving from the last V12 with the standard version weighing under 430g per pair and the Magnesium at just 350g.
Suitable for BMX, “Fixie” bikes and mountain bikes (MTBs), and sold as a pair, the DMR chain tugs are an invaluable asset for anyone who stretches their single speed chain or knocks their rear wheel out of alignment.
Without a doubt, the V8 mountain bike (MTB) pedals have been for several years now, consistently the UK's best-selling flat pedals, offering a great balance between form, function and a reasonable price. The V8 is a solid product with great aesthetics and reliable internals. These pedals run on precision ground loose ball bearings and are serviceable using the provided grease syringe. Corner pins can be tuned for preferred grip (terror pins are available separately). They are also available with a 1/2″ (BMX) axle. Made from aluminium, the DMR V8 bike pedals are ideal for the toughest MTB rides.
These DMR chain tugs with hanger are designed to keep your 10mm axle hub in place within your 10mm horizontal dropout frame. These DMR chain tugs are adjustable from side to side at the point of contact with the dropout to keep the tugs perfectly square. DMR spares are solid, properly designed and rider tested for excellent performance. DMR was kicked into life in the winter of 1995, with the idea to make UK designed bike parts that worked for the way they like to ride.