The Alex Kennedy signature AK Guard received a lot of attention when Eclat debuted it at Interbike back in September. A concept that was spawned from his signature pedal; Eclat wanted to take the robust nylon construction of the AK pedal and apply it to a full guard sprocket. The end result is a 8mm thick full CNC 6061-T6 Alloy sprocket with a fully replaceable 10mm thick Nylon-Fibreglass guard that is then bolted securely on to the sprocket via x4 small bolts. The high-impact, low-friction material of the guard allows you to grind and slide on the sprocket in ways that a standard alloy guard wouldn’t let you – this also opens up the possibility of a whole new world of grind combinations. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy with Nylon Guard WEIGHT: 150g / 5.29oz
The Eclat Techno sweater is made of 50% cotton, 50% polyester and is embroidered with an Eclat logo on the front.
The Eclat Pizza Place sweater is made of 50% cotton, 50% polyester and is embroidered with an Eclat logo on the front.
The Eclat Techno sweater is made of 50% cotton, 50% polyester and is embroidered with an Eclat logo on the front.
Comfortable sweatshirt. It features a small screen print on the front and a large screen print on the rear.
Comfortable sweatshirt. It features a small screen print on the front and a large screen print on the rear.
The Street Tool is the Swiss-Army knife for your BMX. All the functions of the tool are hidden inside the anodized tube. Throw it in your bag and make sure you don’t lend it to anyone, as you’ll never get it back!
Replacement driver for the Eclat Cortex cassette hub.
BMX Handlebars from Eclat. The Dive bars are made from full liquid post heat-treated seamless 4130 crmo. They are available in two rises; a 8.6 and a larger 8.9 both with a flatter 10 backsweep. ###section### Product Specs Rise: Multiple Options Width: 29.5" Up Sweep: 2 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 771g / 1.7lbs ###section### ###shogun-image-section###
Much like Éclat's Freecoaster, the Cortex front hub was designed for the streets. Using the same proven narrow flange spacing as our famous Dynamic front hub, the Cortex comes out of the box with x2 Nylon fibreglass hubguards which are long lasting and replaceable for a very low cost. This hub has been tested by the team over the past year and is designed to keep you grinding on and on and on. This hub features a longer 35mm bolt to accommodate plastic pegs and for a stronger female bolt setup. ###section### Product Specs AXLE SIZE: Female SPOKE HOLES: 36H BEARINGS: Sealed WEIGHT: 302g /10.65oz
The Eclat Taci Hoodie is made of 50% cotton, 50% polyester with an Eclat logo screen printed on the front.
The Eclat Taci Hoodie is made of 50% cotton, 50% polyester with an Eclat logo screen printed on the front.
Jordan Godwin's signature Eclat handlebars were built as a smaller option so Jordan didn't have to keep cutting his bars down. UK street magician Jordan Godwin wanted a taller rise bar with a slightly smaller box width than other Eclat bars, the large radius bends give the Chocolate bar a classic round shape. The Chocolate Bars are constructed from full liquid post heat-treated, seamless 4130 chromoly for maximum durability. Rise height: Both the Black and the Chrome options come in either a 9", 9.25" or a 9.5" rise height. If you're rocking 1" stems the Eclat Chocolate Bars come in oversized as well as regular, click here to get them! ###section### Product Specs Bar Type: 2pc Rise: Multiple Options Width: 27.75" Up Sweep: 1.5° Backsweep: 10.5° Bar Clamping Diameter: 22.2mm Weight: 860g / 1.89lbs ###section### ###shogun-image-section###
Comfortable hooded sweatshirt. It features a small screen print on the front and a large screen print on the rear.
BMX Handlebars from Eclat. The Dive bars are made from full liquid post heat-treated seamless 4130 crmo. They feature a huge 10" rise. ###section### Product Specs Rise: Multiple Options Width: 30" Up Sweep: 2 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 920g / 2.02lbs ###section### ###shogun-image-section###
Introducing the Metra stem from Eclat. Using full CNC machining, Features include; STC (Shark tooth Clamping) for additional handlebar clamping strength, unique offset rear for improved clamping, CNC machining under the stem to reduce weight ###section### Product Specs TYPE: Top Load REACH: 51mm RISE: 30mm CLAMPING DIAMETER: 22.2mm WEIGHT: 367g
The eclat pulse driver was made for their homemade eclat pulse hub. Equipped with sb bearings you are on the right side with this strong driver made by Eclat.
Eclat have taken the tri-spoke Vent sprocket and beefed it up with a 7mm thick guard making it ideal for all who like a good crank arm slide or sprocket stall. Each of the spokes are internally machined to reduce weight without compromising strength. The Vent Guard Sprocket will fit the majority of cranks on the market and uses wider spacing meaning you can run it with wide and half link chains with no issues. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC