Genuine alloy replacement seat stays for Nukeproof Mega 290 model years 2018-2019.
The Nukeproof Dolos wheelset has been designed as a strong and reliable wheelset for dirt jumping. The front hub comes with 20mm end caps fitted and there are additional 15mm end caps in the box. The rear hub is a 135mm x 10mm bolt up so will be perfect for those heavy hits. The rim is constructed from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you ride. Nukeproof has also equipped this model with a micro-shot peened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll enjoy being able to session the jumps in all weather conditions, without worrying about the elements damaging your gear. This wheelset is only available in 26” and has a 25mm internal width suiting tyres from 1.6” to 2.5”. • Conversion Options: Front 15mm & 20mm end caps are also available separately but are included with wheels. • Driver Options: Comes with 11t Driver, 12t and 13t available separately. Manufacturer's Part Number: NUKDOLDJWS Black 26"
Nukeproof Dolos WheelsetFeaturing a special blend of alloys, this dirt jump focused wheelset delivers a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you ride. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll enjoy being able to session the jumps in all weather conditions, without worrying about the elements damaging your gear.The front hub comes with 20mm end caps fitted and there are additional 15mm end caps in the box. The rear hub is a 135mm x 10mm bolt up, so it will be perfect for those heavy hits. This wheelset is only available in 26” and has a 25mm internal width to suit tyres from 1.6” to 2.5”.Features: Rim Material: Alloy Nukeproof Blend Use: Dirt Jump Spacing: Front: 20mm x 110mm; Rear: 10mm x 135mm bolt up (Front 15mm end caps supplied in the box as well) Conversion Options: Front 15mm & 20mm end caps also available separately but are included with wheels Driver Options: Comes with 11T Driver (12T and 13T available separately) Rim Width: Inner: 25mm; Outer: 30.8mm Rim Height: 22mm Tubeless Ready: Yes, pre-taped Spoke Type: J-Bend Spoke Count: 32 Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Points of Engagement: 24 Single or Pair: Pair Weight: Front: 1000g, Rear 1290g including tape, 11t driver & boltsManufacturer's Part Number: NUKDOLDJWS Black 26"Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Solum 260 Alloy FrameThe Solum 260 is the ideal freestyle mountain bike (MTB) frame for dirt jump trail riding, 4-cross (4X) racing, dual-slalom sessions and a playful singletrack trail riding experience. It features a robust and lightweight alloy frame that is ideal for 100mm-travel suspension forks and has modern geometry that's optimised for use with 26" wheels and offers tyre clearance for wide 2.3" tyres.Re-introducing the Solum!Originally introduced to the Nukeproof range back in 2013; the 4130 Steel Solum was Nukeproof's first dirt jump specific frame offering that was designed to bridge the gap between BMX and MTB. The brand new solum picks up where the old one left off but brings the idea bang-up to date. With revised geometry and an all-new lightweight yet bombproof aluminium chassis, the Solum is ready for anything at your local pump track, sessioning your dirt jump spot or racing dual slalom and 4-Cross. Features: All new hydroformed 6061-T6 Custom Triple-Butted Aluminium tube set One Piece Chain Stay Yoke Reinforced Seat Stay bridge Single-speed Specific 44-56 Tapered Headtube Integrated Chain Tugs with Horizontal Drop Out External Cable routing for easy maintenance 135x10mm hub spacing Threaded 73mm Bottom Bracket Max Chainring Size: 32T Max Tyre Clearance: 2.3” 160IS Brake Mount Headset and seat clamp included Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Solum 260 Alloy FrameThe Solum 260 is the ideal freestyle mountain bike (MTB) frame for dirt jump trail riding, 4-cross (4X) racing, dual-slalom sessions and a playful singletrack trail riding experience. It features a robust and lightweight alloy frame that is ideal for 100mm-travel suspension forks and has modern geometry that's optimised for use with 26" wheels and offers tyre clearance for wide 2.3" tyres.Re-introducing the Solum!Originally introduced to the Nukeproof range back in 2013; the 4130 Steel Solum was Nukeproof's first dirt jump specific frame offering that was designed to bridge the gap between BMX and MTB. The brand new solum picks up where the old one left off but brings the idea bang-up to date. With revised geometry and an all-new lightweight yet bombproof aluminium chassis, the Solum is ready for anything at your local pump track, sessioning your dirt jump spot or racing dual slalom and 4-Cross. Features: All new hydroformed 6061-T6 Custom Triple-Butted Aluminium tube set One Piece Chain Stay Yoke Reinforced Seat Stay bridge Single-speed Specific 44-56 Tapered Headtube Integrated Chain Tugs with Horizontal Drop Out External Cable routing for easy maintenance 135x10mm hub spacing Threaded 73mm Bottom Bracket Max Chainring Size: 32T Max Tyre Clearance: 2.3” 160IS Brake Mount Headset and seat clamp included Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Solum 260 Alloy FrameThe Solum 260 is the ideal freestyle mountain bike (MTB) frame for dirt jump trail riding, 4-cross (4X) racing, dual-slalom sessions and a playful singletrack trail riding experience. It features a robust and lightweight alloy frame that is ideal for 100mm-travel suspension forks and has modern geometry that's optimised for use with 26" wheels and offers tyre clearance for wide 2.3" tyres.Re-introducing the Solum!Originally introduced to the Nukeproof range back in 2013; the 4130 Steel Solum was Nukeproof's first dirt jump specific frame offering that was designed to bridge the gap between BMX and MTB. The brand new solum picks up where the old one left off but brings the idea bang-up to date. With revised geometry and an all-new lightweight yet bombproof aluminium chassis, the Solum is ready for anything at your local pump track, sessioning your dirt jump spot or racing dual slalom and 4-Cross. Features: All new hydroformed 6061-T6 Custom Triple-Butted Aluminium tube set One Piece Chain Stay Yoke Reinforced Seat Stay bridge Single-speed Specific 44-56 Tapered Headtube Integrated Chain Tugs with Horizontal Drop Out External Cable routing for easy maintenance 135x10mm hub spacing Threaded 73mm Bottom Bracket Max Chainring Size: 32T Max Tyre Clearance: 2.3” 160IS Brake Mount Headset and seat clamp included Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Solum 260 Alloy FrameThe Solum 260 is the ideal freestyle mountain bike (MTB) frame for dirt jump trail riding, 4-cross (4X) racing, dual-slalom sessions and a playful singletrack trail riding experience. It features a robust and lightweight alloy frame that is ideal for 100mm-travel suspension forks and has modern geometry that's optimised for use with 26" wheels and offers tyre clearance for wide 2.3" tyres.Re-introducing the Solum!Originally introduced to the Nukeproof range back in 2013; the 4130 Steel Solum was Nukeproof's first dirt jump specific frame offering that was designed to bridge the gap between BMX and MTB. The brand new solum picks up where the old one left off but brings the idea bang-up to date. With revised geometry and an all-new lightweight yet bombproof aluminium chassis, the Solum is ready for anything at your local pump track, sessioning your dirt jump spot or racing dual slalom and 4-Cross. Features: All new hydroformed 6061-T6 Custom Triple-Butted Aluminium tube set One Piece Chain Stay Yoke Reinforced Seat Stay bridge Single-speed Specific 44-56 Tapered Headtube Integrated Chain Tugs with Horizontal Drop Out External Cable routing for easy maintenance 135x10mm hub spacing Threaded 73mm Bottom Bracket Max Chainring Size: 32T Max Tyre Clearance: 2.3” 160IS Brake Mount Headset and seat clamp included Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Solum 260 frame features a robust and lightweight alloy frame that is ideal for 100mm-travel suspension forks and has modern geometry that's optimised for use with 26" wheels and offers tyre clearance for wide 2.3" tyres. Re-introducing the Solum! Originally introduced to the Nukeproof range back in 2013; the 4130 Steel Solum was Nukeproof's first dirt jump specific frame offering that was designed to bridge the gap between BMX and MTB. The brand new solum picks up where the old one left off but brings the idea bang-up to date. With revised geometry and an all-new lightweight yet bombproof aluminium chassis, the Solum is ready for anything at your local pump track, sessioning your dirt jump spot or racing dual slalom and 4-Cross. Features: All new hydroformed 6061-T6 Custom Triple-Butted Aluminium tube set One Piece Chain Stay Yoke Reinforced Seat Stay bridge Single-speed Specific 44-56 Tapered Headtube Integrated Chain Tugs with Horizontal Drop Out External Cable routing for easy maintenance 135x10mm hub spacing Threaded 73mm Bottom Bracket Max Chainring Size: 32T Max Tyre Clearance: 2.3” 160IS Brake Mount Headset and seat clamp included
The Nukeproof Horizon V2 Rear Wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Rim Material: Alloy Nukeproof BlendUse: MTB, All Mountain, Enduro and DHSpacing Options: 142x12mm; 148x12mm and 150/157x12mmConversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately)Freehub Options: Shimano HG, Shimano Micro spline and SRAM XDRear Hub Engagement: 102 points of engagement (every 3.52°)Wheel Size: 27.5" or 29" optionsInner Rim Width: 30mmOuter Rim Width: 35mmRim Height: 21.6mmTubeless Ready: Yes, pre-taped and valve suppliedSpoke Count: 32Spoke Type: J-BendDisc Mount: 6-BoltLacing Pattern: 3xBuild: Hand builtSingle or Pair: SingleWeight: 27.5 148x12mm HG: 1093g; 27.5 150x12mm HG: 1116g, 29 148mm x 12mm XD: 1146g (All weights include tape & valve)Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 Bearings - After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the LLU/LLB seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub - This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future.Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included - Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built in. A full range of spares are available to service your hub in the future.
Completely redesigned from the ground up, the Nukeproof Horizon V2 Rear Wheel 102t delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this rear wheel has gone through extensive testing to meet the demands of both Enduro and DH riders. It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series.This gives you the best of both worlds in terms of stiffness, strength and weight. Nukeproof has also ensured this rear wheel's rim profile is the same as the front (sold separately), the only difference is the rear has a thicker sidewall for added strength on the trails. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better.Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future.Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in.A full range of spares are available to service your hub in the future.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:Rear 27.5" Wheel: Non-Drive Side: 271, Driveside: 268 Rear 29" Wheel: Non-Drive Side: 289, Driveside: 286 Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail / All Mountain / Enduro / DH,Rim Width: Inner: 30mm; External: 35mm; Rim Height: 21.6mm,Spacing Options: 142x12mm; 148x12mm; 150/157x12mm,Conversion options: 142x12mm can be converted to 135mm QR, 148x12mm can be converted to 141mm Boost with end caps (sold separately),Rear hub engagement: 102 points of engagement (every 3.52 degrees),Freehub options: Shimano HG, Shimano Microspline, SRAM XD,Spoke Type: J-Bend; Spoke count: 32; Lacing pattern: 3x,Disc Mount: 6-Bolt,Tubeless Ready: Yes - Pre-taped and valve supplied;,Build: Handbuilt .
Completely redesigned from the ground up, the Nukeproof Horizon V2 Rear Wheel 102t delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this rear wheel has gone through extensive testing to meet the demands of both Enduro and DH riders. It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series.This gives you the best of both worlds in terms of stiffness, strength and weight. Nukeproof has also ensured this rear wheel's rim profile is the same as the front (sold separately), the only difference is the rear has a thicker sidewall for added strength on the trails. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better.Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future.Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in.A full range of spares are available to service your hub in the future.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:Rear 27.5" Wheel: Non-Drive Side: 271, Driveside: 268 Rear 29" Wheel: Non-Drive Side: 289, Driveside: 286 Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail / All Mountain / Enduro / DH,Rim Width: Inner: 30mm; External: 35mm; Rim Height: 21.6mm,Spacing Options: 142x12mm; 148x12mm; 150/157x12mm,Conversion options: 142x12mm can be converted to 135mm QR, 148x12mm can be converted to 141mm Boost with end caps (sold separately),Rear hub engagement: 102 points of engagement (every 3.52 degrees),Freehub options: Shimano HG, Shimano Microspline, SRAM XD,Spoke Type: J-Bend; Spoke count: 32; Lacing pattern: 3x,Disc Mount: 6-Bolt,Tubeless Ready: Yes - Pre-taped and valve supplied;,Build: Handbuilt .
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ready for fast-paced and aggressive trail-riding, this rear wheel has gone through extensive testing to meet the demands of both Enduro and DH riders. It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight. Nukeproof has also ensured this rear wheel's rim profile is the same as the front (sold separately), the only difference is the rear has a thicker sidewall for added strength on the trails. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 Hub This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Non Drive Side Spoke Length Driveside Spoke Length 27.5" 271 268 29" 289 286 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps
The Nukeproof Horizon CS CroMo Pedals are the slightly smaller version of Nukeproof's the new SPD compatible range and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance and low weight. With design input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's built to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Key Features:Cold forged T1- 6061 alloy body with CNC finishing,Tough and lightweight CrMo axle,Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair),Low profile contoured chassis with optimised leading edge,Side Support Platform,Dual Engagement Mechanism,SPD compatible,Weight: 352g.
The Nukeproof Horizon CL Ti Pedals have been extensively engineered to exact standards and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance, low weight, and now feature an all-new SPD cleat engagement. With input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's designed to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Key Features:Cold forged T1- 6061 alloy body with CNC finishing.Tough and lightweight Titanium axle.Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair).Low profile contoured chassis with optimised leading edge.Side Support Platform.Dual Engagement Mechanism.SPD compatible.Weight: 430g.