Nukeproof Reactor 290 Carbon FrameThis mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build for excellent stiffness and durability, without weighing down your ride with unnecessary excess grams. Nukeproof has also kitted out this model with a Factory Series Fox Float X rear shock, which delivers smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing that allows you to enjoy trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is an ideal choice of upgrade for completing your full suspension MTB bike build.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre Use: Mountain Bike (MTB) frame Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.5Kgs/7.7lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor 290 Carbon FrameThis mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build for excellent stiffness and durability, without weighing down your ride with unnecessary excess grams. Nukeproof has also kitted out this model with a Factory Series Fox Float X rear shock, which delivers smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing that allows you to enjoy trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is an ideal choice of upgrade for completing your full suspension MTB bike build.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre Use: Mountain Bike (MTB) frame Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.5Kgs/7.7lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 290 Alloy Frame - GreyAll set for charging from trail to trail, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted 6061 aluminium construction that's impressively tough and dependable. Thanks to its 157x12mm Boost rear hub spacing, this model also allows for maximum stiffness and control on the more demanding of terrain conditions. Another highlight is its race-ready geometry that includes internal cable routing for a hassle-free, sleek finish. Coming complete with a RockShox Super Deluxe Coil Ultimate DH RC rear shock, this frame is engineered for smooth and consistent performance, wherever the trail leads you.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers.The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Race Ready Full Suspension MTB FrameThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 190mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x70mm, Bearing End, Red Coil Spring (M=400LBS/L=450LBS /XL=500LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 190mm Wheels Size: 29" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x70mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing Three-stage Dissent linkage 4 position adjustable linkage progression chip system 3 Position adjustable chainstay length Weight: 5.14kgs/11.3lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 297 Alloy Frame - GreyFeaturing a robust 6061 aluminium build, this full-suspension mountain bike (MTB) frame has been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you attack the trails. Engineered for riders who want to complete their mullet bike setup, this version also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another highlight is its 157x12mm rear hub Boost axle spacing, which delivers stiff and responsive handling on the most demanding of terrain conditions.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Lightweight Full Suspension MTB Frame with 200mm TravelThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Three-stage Dissent linkage Four position adjustable linkage progression chip system Three position adjustable chainstay length Weight: 5.06kgs/11.1lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof's Horizon V2 Carbon Handlebar has been revised with a new profile and rise options, giving you more choice and comfort in a great value, stylish package.Lightweight and strong carbon fibre construction also provides a super comfortable ride feelNew profile doesn't reduce reach measurement, ideal for bikes with latest geometry trends6 degree upsweep and 9 degree back sweep puts hands in comfortable positionThe revised Horizon V2 Carbon riser bar features an updated profile with the same angles and rise options as before, so you can enjoy reliable and precise steering in a super strong package. This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty! Nukeproof has also kitted out this version with a 9 degree backsweep without reducing its reach. This means that you won t lose any reach, like you would on a standard bar, making the Horizon ideal for the latest breed of bikes with long, and slack geometry.
Nukeproof's Horizon V2 Carbon Handlebar has been revised with a new profile and rise options, giving you more choice and comfort in a great value, stylish package.Lightweight and strong carbon fibre construction also provides a super comfortable ride feelNew profile doesn't reduce reach measurement, ideal for bikes with latest geometry trends6 degree upsweep and 9 degree back sweep puts hands in comfortable positionThe revised Horizon V2 Carbon riser bar features an updated profile with the same angles and rise options as before, so you can enjoy reliable and precise steering in a super strong package. This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty! Nukeproof has also kitted out this version with a 9 degree backsweep without reducing its reach. This means that you won t lose any reach, like you would on a standard bar, making the Horizon ideal for the latest breed of bikes with long, and slack geometry.
Nukeproof's Horizon V2 Carbon Handlebar has been revised with a new profile and rise options, giving you more choice and comfort in a great value, stylish package.Lightweight and strong carbon fibre construction also provides a super comfortable ride feelNew profile doesn't reduce reach measurement, ideal for bikes with latest geometry trends6 degree upsweep and 9 degree back sweep puts hands in comfortable positionThe revised Horizon V2 Carbon riser bar features an updated profile with the same angles and rise options as before, so you can enjoy reliable and precise steering in a super strong package. This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty! Nukeproof has also kitted out this version with a 9 degree backsweep without reducing its reach. This means that you won t lose any reach, like you would on a standard bar, making the Horizon ideal for the latest breed of bikes with long, and slack geometry.
The Nukeproof Horizon CS CroMo Pedals are the slightly smaller version of Nukeproof's the new SPD compatible range and take inspiration from the hugely successful Horizon Pro flat pedal.Cold forged T1- 6061 alloy body with CNC finishing and CrMo axle are light & super strongProven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair)Low profile contoured chassis with optimised leading edge for improved ground clearanceDual Engagement Mechanism is compatible with Shimano SPD cleats (Nukeproof cleats supplied)The Horizon CS pedals offer the optimum balance of impact strength, fatigue resistance and low weight. With design input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's built to win. The SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float. If you want a lightweight, tough & stylish SPD pedal for your trail or enduro bike, the Nukeproof Horizon CS is the perfect choice!
For their Neutron Half Waffle Lock-On Grips, Nukeproof has adopted a race proven shape with an MX inspired half waffle grip pattern, providing superb grip, comfort and durability.Soft A25 kraton rubber is grippy, comfortable and durableDual locking mechanism is super secure142mm long and 31mm in diameterBy using a low profile and a soft rubber compound, Nukeproof ensured that these grips offer optimised trail feedback without compromising on comfort. The locking mechanisms on either end provide a secure connection with the bar and the durable A25 Kraton rubber not only offers excellent grip, it ensures a long lifespan.
For their Neutron Knurled Lock-On Grips, Nukeproof has adopted a race proven shape with a grippy knurled texture, providing superb grip, comfort and durability.Soft A25 kraton rubber is grippy, comfortable and durableDual locking mechanism is super secure142mm long and 31mm in diameterBy using a low profile and a soft rubber compound, Nukeproof ensured that these grips offer optimised trail feedback without compromising on comfort. The locking mechanisms on either end provide a secure connection with the bar and the durable A25 Kraton rubber not only offers excellent grip, it ensures a long lifespan.
For their Neutron Knurled Lock-On Grips, Nukeproof has adopted a race proven shape with a grippy knurled texture, providing superb grip, comfort and durability.Soft A25 kraton rubber is grippy, comfortable and durableDual locking mechanism is super secure142mm long and 31mm in diameterBy using a low profile and a soft rubber compound, Nukeproof ensured that these grips offer optimised trail feedback without compromising on comfort. The locking mechanisms on either end provide a secure connection with the bar and the durable A25 Kraton rubber not only offers excellent grip, it ensures a long lifespan.
Nukeproof's Horizon V2 Carbon Handlebar has been revised with a new profile and rise options, giving you more choice and comfort in a great value, stylish package.Lightweight and strong carbon fibre construction also provides a super comfortable ride feelNew profile doesn't reduce reach measurement, ideal for bikes with latest geometry trends6 degree upsweep and 9 degree back sweep puts hands in comfortable positionThe revised Horizon V2 Carbon riser bar features an updated profile with the same angles and rise options as before, so you can enjoy reliable and precise steering in a super strong package. This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty! Nukeproof has also kitted out this version with a 9 degree backsweep without reducing its reach. This means that you won t lose any reach, like you would on a standard bar, making the Horizon ideal for the latest breed of bikes with long, and slack geometry.
Nukeproof's Horizon V2 Carbon Handlebar has been revised with a new profile and rise options, giving you more choice and comfort in a great value, stylish package.Lightweight and strong carbon fibre construction also provides a super comfortable ride feelNew profile doesn't reduce reach measurement, ideal for bikes with latest geometry trends6 degree upsweep and 9 degree back sweep puts hands in comfortable positionThe revised Horizon V2 Carbon riser bar features an updated profile with the same angles and rise options as before, so you can enjoy reliable and precise steering in a super strong package. This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty! Nukeproof has also kitted out this version with a 9 degree backsweep without reducing its reach. This means that you won t lose any reach, like you would on a standard bar, making the Horizon ideal for the latest breed of bikes with long, and slack geometry.
Nukeproof's Horizon V2 Carbon Handlebar has been revised with a new profile and rise options, giving you more choice and comfort in a great value, stylish package.Lightweight and strong carbon fibre construction also provides a super comfortable ride feelNew profile doesn't reduce reach measurement, ideal for bikes with latest geometry trends6 degree upsweep and 9 degree back sweep puts hands in comfortable positionThe revised Horizon V2 Carbon riser bar features an updated profile with the same angles and rise options as before, so you can enjoy reliable and precise steering in a super strong package. This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty! Nukeproof has also kitted out this version with a 9 degree backsweep without reducing its reach. This means that you won t lose any reach, like you would on a standard bar, making the Horizon ideal for the latest breed of bikes with long, and slack geometry.
For their Neutron Half Waffle Lock-On Grips, Nukeproof has adopted a race proven shape with an MX inspired half waffle grip pattern, providing superb grip, comfort and durability.Soft A25 kraton rubber is grippy, comfortable and durableDual locking mechanism is super secure142mm long and 31mm in diameterBy using a low profile and a soft rubber compound, Nukeproof ensured that these grips offer optimised trail feedback without compromising on comfort. The locking mechanisms on either end provide a secure connection with the bar and the durable A25 Kraton rubber not only offers excellent grip, it ensures a long lifespan.
The Sam Hill Signature Series has been developed for one of the world s best with one thing in mind; winning! The five time downhill world champion needs no introduction. He is widely regarded as one of the best riders of all time and as such, he knows what works best! Soft A25 kraton rubber is grippy, comfortable and durableSignature Sam Hill diamond texture and half waffle designDual locking mechanism is super secure135mm long and 31.5mm in diameterBy using a low profile and a soft rubber compound, Nukeproof ensured that these grips offer optimised trail feedback without compromising on comfort. The locking mechanisms on either end provide a secure connection with the bar and the durable A25 Kraton rubber not only offers excellent grip, it ensures a long lifespan.
Nukeproof's Horizon V2 Carbon Handlebar has been revised with a new profile and rise options, giving you more choice and comfort in a great value, stylish package.Lightweight and strong carbon fibre construction also provides a super comfortable ride feelNew profile doesn't reduce reach measurement, ideal for bikes with latest geometry trends6 degree upsweep and 9 degree back sweep puts hands in comfortable positionThe revised Horizon V2 Carbon riser bar features an updated profile with the same angles and rise options as before, so you can enjoy reliable and precise steering in a super strong package. This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty! Nukeproof has also kitted out this version with a 9 degree backsweep without reducing its reach. This means that you won t lose any reach, like you would on a standard bar, making the Horizon ideal for the latest breed of bikes with long, and slack geometry.
For their Neutron Knurled Lock-On Grips, Nukeproof has adopted a race proven shape with a grippy knurled texture, providing superb grip, comfort and durability.Soft A25 kraton rubber is grippy, comfortable and durableDual locking mechanism is super secure142mm long and 31mm in diameterBy using a low profile and a soft rubber compound, Nukeproof ensured that these grips offer optimised trail feedback without compromising on comfort. The locking mechanisms on either end provide a secure connection with the bar and the durable A25 Kraton rubber not only offers excellent grip, it ensures a long lifespan.
Nukeproof's Horizon V2 Carbon Handlebar has been revised with a new profile and rise options, giving you more choice and comfort in a great value, stylish package.Lightweight and strong carbon fibre construction also provides a super comfortable ride feelNew profile doesn't reduce reach measurement, ideal for bikes with latest geometry trends6 degree upsweep and 9 degree back sweep puts hands in comfortable positionThe revised Horizon V2 Carbon riser bar features an updated profile with the same angles and rise options as before, so you can enjoy reliable and precise steering in a super strong package. This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty! Nukeproof has also kitted out this version with a 9 degree backsweep without reducing its reach. This means that you won t lose any reach, like you would on a standard bar, making the Horizon ideal for the latest breed of bikes with long, and slack geometry.
Nukeproof's Horizon V2 Carbon Handlebar has been revised with a new profile and rise options, giving you more choice and comfort in a great value, stylish package.Lightweight and strong carbon fibre construction also provides a super comfortable ride feelNew profile doesn't reduce reach measurement, ideal for bikes with latest geometry trends6 degree upsweep and 9 degree back sweep puts hands in comfortable positionThe revised Horizon V2 Carbon riser bar features an updated profile with the same angles and rise options as before, so you can enjoy reliable and precise steering in a super strong package. This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty! Nukeproof has also kitted out this version with a 9 degree backsweep without reducing its reach. This means that you won t lose any reach, like you would on a standard bar, making the Horizon ideal for the latest breed of bikes with long, and slack geometry.