This drop handlebar is equipped with a hard-wearing aluminium construction, which allows it to handle the increased pressure from training and competing. Classed as the bike fitter's go-to bar, it has a short reach to the hoods that allows for a proper fit without compromising stem length and steering control. With its revised ramp angle, this model also ensures that road riders benefit from a proper fit on even the most challenging setups. Road Bike Drop Bar with Short Reach With 70mm of reach and a 128mm drop, this version the shortest of the Service Course series. This makes it a great choice of upgrade for riders with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem. The SL-70’s flattened top also provides a better fit to the hand and is clip-on bar compatible. Manufacturer's Part Numbers: ZHB8201002 Black Matte 40cm ZHB8201003 Black Matte 42cm ZHB8201004 Black Matte 44cm ZHB8201000 Black Matte 36cm ZHB8201001 Black Matte 38cm
Prepared for clocking up the miles on your road bike, this sleek drop handlebar boasts a hard-wearing 6061 aluminium build that makes it strong and reliable wherever your next ride takes you. Zipp has also equipped this version with comfortable geometry including seven degrees ramp angle and four degrees outsweep, which allows for smooth and supportive steering as you put the power down. Another highlight is it's clip-on compatible, so you can add clip-on extensions (available separately) for an even greater choice of positioning. Coming complete with an eye-catching finish, this is a great choice of upgrade for performance-focused steering with stylish looks that complement your ride. Aluminium Drop Handlebar with 80mm Reach The Service Course 80 bar provides what today’s riders demand—comfortable and efficient positions on the tops or hoods or that aero and efficient position in the drops. The bar allows a neutral wrist position on the drops and a flat brake hood transition for the athlete even while riding with a more upright position. Drops are angled outward by 4 degrees to reduce wrist strain. Named after its 80mm reach, the bar brings the hoods and control levers back where you want them, while keeping the drops close. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. All of this performance results in greater speed at a price that won’t break your budget. Manufacturer's Part Numbers: ZP8164001 Silver 40cm ZP8164002 Silver 42cm ZP8164003 Silver 44cm ZP8164000 Silver 38cm
Whether you're conquering your next training session or racing in an event, this drop handlebar is engineered for smooth and reliable performance. It features a hard-wearing 6061 aluminium construction, which gives it excellent strength and durability as you clock up the miles on your road bike. Zipp has also equipped this model with comfortable geometry, which includes seven degrees ramp angle and four degrees outsweep for simple and supportive handling. Another highlight is its clip-on compatibility, which means you can add clip-on extensions (available separately) for a wider range of hand positions as well as further increased comfort. Coming complete with a sleek finish, this is a perfect choice of upgrade for smooth and dependable steering performance, with eye-catching style. Ergonomic Drop Handlebar with 80mm Reach Zipp Service Course 80 Ergo handlebar is all about making you faster in style and comfort. It features an ergonomic flat top. The drop shape features an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course 80 Ergo is the brand's first ergo bars to be clip-on compatible. The Service Course 80 Ergo bar uses 6061 aluminium to tip the scales at 315g for a 42cm-wide bar. Technologies: - 6061 aluminium for light weight and durability. - 80mm reach and 125mm drop for a medium-high position. - Flattened top shape with 3° backsweep for wrist comfort. - Clip-on compatible (40, 42, 44cm sizes only). - Di2® RS910 junction compatible. Manufacturer's Part Number: ZP8166000 Silver 38cm 70mm Clamp ZP8166001 Silver 40cm 90mm Clamp ZP8166002 Silver 42cm 90mm Clamp ZP8166003 Silver 44cm 110mm Clamp
The Service Course SL-80 has been specially designed for the thrill-seekers and road racing adrenaline junkies for the ultimate drop bar experience. Boasting ultra-lightweight and strong 7050 aluminium construction that's fully clip compatible, you can be assured that this bar has been manufactured for years of long-lasting use. Engineered to be just as comfortable in the drops as it is in the hoods or top of the bar, the ergonomics of this model allow you to maintain a neutral wrist position. Thanks to its carefully constructed profile, there's no need for an upward rotation on the bar thanks to its slight outward angling which reduces wrist strain. This state-of-the-art bar is named after its 80mm reach which helps place the levers and drops where you want them without having to think about a shorter stem.
It boasts an excellent aerodynamic design, stiff and strong UD carbon fibre construction, and efficient internal cable routing. The SL-70 Aero bar also benefits from Zipp's Computational Fluid Dynamics (CFD), which was used to design their World class Firecrest® wheels. So, with these bars, you can be sure you’re getting the very best technology to give you the edge on race day.
Whether you're training or competing, this road bike drop handlebar is engineered for smooth, light and dependable steering performance. It features a hard-wearing 7050 aluminium build, which makes it more than capable of handling all of the intensity associated with racing. Zipp has also equipped this model with comfortable geometry, so you can benefit from smooth transitions and ergonomic hand positioning. Another highlight is its clip compatible design, which allows you to add clip-on aerobars (available separately) for an even broader range of positioning and comfort. Weighing in at only 275g, this is a lightweight choice of upgrade for dominating your way to the finish line. Race-Ready Road Bike Drop Handlebar A traditional road racer’s bar, the Service Course SL-88 helps you achieve a “long-and-low” position on the bike. The ends of the drops provide a horizontal flat position for the rider to rest straight down upon. This versatility comes from the bar’s longer 88mm reach (the horizontal distance from the bar’s stem clamp area to centre of the brake perch) and deeper 130mm drop (vertical distance from the bar’s stem clamp area to bottom of drops). In addition, the bar’s 14° ramp angle provides a smooth transition to the brake hoods for a comfortable ergonomic hand position on the hoods. 7050 aluminium. Lightweight and durable. Drops are angled outward by 3 degrees to reduce wrist strain. Clip compatible. Manufacturer's Part Numbers: 00.6618.026.030 Black/Black 40cm 00.6618.026.040 Black/Black 42cm 00.6618.026.050 Black/Black 44cm
This aero handlebar is equipped with Zipp's renowned Rapid Route internal cable routing system. Rapid Route cable exits are conveniently positioned on this bar for easy installation of your brake cables, so you can enjoy straightforward integration with your time trial (TT) or triathlon bike. Carbon Wing-Shaped Aero Bar With its wing-shaped bar top, the SL-70 Aero features Zipp’s latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD). The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10-degree ramp angle to the brake hoods eliminated the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops. The SL-70 Aero is not compatible with internal routing of DI2 wires, or the bar end junction. Manufacturer's Part Numbers: 38cm: ZHB8203000; 40cm: ZHB8203001; 42cm: ZHB8203002 and 44cm: ZHB8203003
Crafted from 6066 series aluminium, this road bike base bar offers superior aerodynamics and ergonomics at an affordable price. The Vuka Alumina base bar delivers on a big challenge given to Zipp's engineers – create a high-performance aluminium base bar that’s sleek and light with the right amount of adjustability. Base Bar with Internal Cable Routing The Vuka Alumina base bar is sleek with clean internal cable routing for easy installation. Handgrips are angled upward by 5 degrees for a natural wrist position when climbing or sprinting. The bar’s mounting area is 120mm wide to allow for an array of positions to accommodate many riding styles and body types. The Vuka Alumina is compatible with all current drive-train systems and all plug-in-style brake levers. It’s optimised for use with the Vuka Clip but is compatible with most clip aerobars on the market. Bead Blast Finish The Vuka Alumina is lightweight at 250 grams, has a 40cm (centre-to-centre) width and a 31.8mm clamp diameter. Its bead blast black finish with gloss graphics mean the bar looks as smooth as it performs. Manufacturer's Part Number: ZP8168000 Blast Black 40cm 31.8mm
Zipp’s 303 Firecrest Tubeless rim-brake rear wheel is an all-arounder for a new era of road riding. It’s rich in heritage yet loaded with innovations. It’s as adept in the mountains as it is on rolling hills, windswept farm lanes, or ferocious field sprints. Tubeless Ready Road Bike Rear Wheel At Zipp, they never rest on laurels. This rear wheel features a 19mm internal width and is tubeless ready. That means you can run lower tyre pressure for greater cornering grip and compliance with reduced rolling resistance without the risk of pinch flats. Lightweight Carbon with ABLC Sawtooth Technology When it comes to pure speed, the 303 Firecrest Tubeless packs a serious punch. It’s lightweight with ABLC Sawtooth Technology, a complex dimpling pattern first developed for the brand's top-level NSW wheel lineup. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability, which they call AeroBalance. Rim Brake Compatible Zipp’s ShowStoppertextured braking surface delivers unrivalled rim braking performance in wet or dry conditions. At the center of the 303 Firecrest Tubeless rim brake is a new versatile and durable hub, the German-engineered ZR1. Item Top Features Continued: - Zipp graphics and cosmetic identity that scream speed - New ZR1 hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Built with Sapim CX Sprint J-bend spokes - Tubeless ensuring secure performance even when ridden at lower tire pressures - Versatile 45mm rim profile that’s fast, stable and versatile - ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel - Showstopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions - XDR or SRAM/Shimano driver bodies available to select - Ships with QR end caps, quick-release skewers - Campagnolo driver body sold separately Technologies: Showstopper: Our industry-leading Showstopper brake track continues to evolve and improve, providing unmatched stopping power and modulation regardless of weather conditions or the length of the descent. ABLC Sawtooth: ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel. AeroBalance: Zipp’s sole mission is to help you go faster. That's why our wheels are race-ready before they're camera-ready. For years, Zipp has used a combination of testing methods – wind tunnel, CFD computer simulations, pro athlete evaluations, on-road testing, and the RollingRoad ride simulator – to refine aero performance to new levels of excellence. Over the decades of innovation, our engineers have learned to look beyond just focusing on simply reducing aero drag. Instead, the goal now is to reduce aero drag while also minimizing the effects of crosswinds on handling. This optimising of aero efficiency and crosswind stability became known internally at Zipp as AeroBalance. The approach began with Firecrest technology and has been advanced with the introduction of the NSW lineup, especially with the Sawtooth technology found in the 454 and 858 NSW. Sawtooth accomplishes this with a series of patented fin-shaped Hyperfoil nodes along the inner diameter of the rim that work together with our new HexFin ABLC dimples for improved airflow. Manufacturer's Part Numbers: ZPWH8532001 Black 700c SRAM XD SRAM XDR ZPWH8532000 Black 700c Shimano/SRAM
Ready for every mile of road, this seatpost comes equipped with a hard-wearing 6061 aluminium construction for an excellent combination of strength and durability on your road bike. Zipp has also kitted out this model with a 6061 aluminium clamp and steel hardware, so you can benefit from a tight and secure hold to your saddle rails whatever the conditions. Another highlight is its etched Zipp logo finishing, which gives it a sleek appearance to complement your ride. Adjustable Road Bike Seatpost Zipp’s Service Course seatpost is lightweight and strong for security and designed to offer a precise fit at an affordable price. It also provides easy tool access to the downward facing bolt for easy setup and micro-adjustments after it’s mounted. Better fit means better performance to make you faster. An out-of-position saddle means wasted energy with every pedal stroke. The secure, low-profile clamp allows the saddle to slide farther back along the rails, and with this 20mm setback option, it’s possible for nearly any rider to achieve the perfect fit. For high strength, low weight, and efficient use of every gram, the shaft and head are not bonded but are 3D-forged from 6061 aluminium. The Service Course seatpost is 350mm in length. Technologies: - 2-bolt adjustability. - 3D-forged from 6061 aluminium. - Fits all common saddle rail types. - Lifetime manufacturer's warranty. Manufacturer's Part Numbers: ZP8048001 Silver 31.6mm x 350mm ZP8048000 Silver 27.2mm x 350mm
Wide Carbon Fibre Road Bike Wheel Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheel maintains its ideal-for-every-terrain 45mm rim depth. However, this model adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. Road bikes are more versatile than ever no matter the road surface, but just as fast as before. The 303 S offers an entirely new rim profile and design to optimise rider performance on this new breed of bike. This wheelset is tubeless compatible and designed for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the tarmac. 45mm Deep Front Wheel The 303 S is among Zipp's lightest wheelsets, optimised for top aero performance with a 28mm tyre but capable of handling gravel tyres up to 50mm wide. The key innovation is in the 303 S’s rim design. Its 45mm rim depth is the same as its predecessor, the 302 Disc brake. But its external rim width is 2mm wider, at 27mm, and its tyre bed is a full 7mm wider, at 23mm internal width. That rim platform is designed to be the fastest with a 28mm tyre. The wide rim optimises tyre profile to allow lower tyre pressure. That helps to reduce rolling resistance and provides a more compliant ride. The result of all this is a 10 watt savings vs. a top peer wheel in total power required to ride 40kph on a flat road with a 28mm tire, according to internal Zipp testing. This groundbreaking wheelset also features all-new cosmetics, setting the rider apart from the pack, and comes at a very attractive price. Additional Features: Provides today’s cyclists the versatility they demand with the speed they crave Updated Zipp graphics and cosmetic identity Fastest with 28mm, fits wide gravel tyres Wide rims optimise tyre profile to allow lower tyre pressure, especially with tubeless. This results in a larger contact patch for increased grip Lower tyre pressures and larger volume provides a compliant ride with fewer vibrations Significant watt savings when running larger tyres at lower pressure Wide hookless rims create a seamless transition to the tyre, reducing drag 76 DB hub with centre locking interface Lifetime Warranty
This rim features legendary Firecrest technology, providing outstanding aerodynamic performance, straight-line power transfer efficiency, great stability in crosswinds and is perfect for climbing due to its weight. They deliver precise handling and stability on adrenaline fuelled descents and snappy acceleration when putting the power down. Firecrest Design Benefits The fundamental benefits of the Firecrest design are that its shape moves the centre of air pressure backwards, giving the 82mm deep rim the crosswind stability of a much shallower rim. Also, the 26mm wide brake track (at centre) enables the Tubular tyre to achieve a wider, more stable profile without compromising rolling resistance. Exceptional Rolling Efficiency At the centre of this wheel is the Zipp 177 hub, which features unmatched durability and advanced bearing protection, with no bearing pre-load required. This hub provides exceptional rolling efficiency and a consistent performance output that you will be hardpressed to find a rival in the same wheel class.
Ready for every mile of road, this seatpost comes equipped with a hard-wearing 6061 aluminium construction for an excellent combination of strength and durability on your road bike. Zipp has also kitted out this model with a 6061 aluminium clamp and steel hardware, so you can benefit from a tight and secure hold to your saddle rails whatever the conditions. Another highlight is its etched Zipp logo finishing, which gives it a sleek appearance to complement your ride. Adjustable Road Bike Seatpost Zipp’s Service Course seatpost is lightweight and strong for security and designed to offer a precise fit at an affordable price. It also provides easy tool access to the downward facing bolt for easy setup and micro-adjustments after it’s mounted. Better fit means better performance to make you faster. An out-of-position saddle means wasted energy with every pedal stroke. The secure, low-profile clamp allows the saddle to slide farther back along the rails, and with this zero setback option, it’s possible for nearly any rider to achieve the perfect fit. For high strength, low weight, and efficient use of every gram, the shaft and head are not bonded but are 3D-forged from 6061 aluminium. The Service Course seatpost is 350mm in length. Technologies: - Two cosmetic options, bead-blast black or distinctive silver. - 2-bolt adjustability. - 3D-forged from 6061 aluminium. - Fits all common saddle rail types. - Lifetime manufacturer's warranty. Manufacturer's Part Number: ZP8049001 Silver 31.6mm x 350mm ZP8049000 Silver 27.2mm x 350mm
The Service Course SL70 Ergo from Zipp is a go-to bar for outstanding, top-notch performance from a reliable brand. Fully equipped with the same compact reach and drop dimensions as the Service Course SL-70, this stunning model also has a contoured top section for a more natural ergonomic grip on the bar tops, making it exceptionally comfortable and race-ready. Boasting incredibly strong 7050 aluminium construction, this stunning bar provides years of long-lasting use as well as keeping the overall weight of your ride as low as possible, thanks to its lightweight profile. Based on bike-fitters feedback as well as pro-riders, this bar has been updated with the latest features that riders need to get soaring. Thanks to its new variable radius drop design, you can change to multiple hand positions when riding in the drops. This provides exceptional comfort for riders who like to reach down to the drops as well as riders who reach in. Showing off its 3 degrees backsweep for wrist comfort and a 10-degree ramp angle, this bar provides the perfect transition from bars to hoods.
The Service Course SL70 from Zipp is a go-to bar for outstanding, top-notch performance from a reliable brand. Boasting incredibly strong 7050 aluminium construction, this stunning bar provides years of long-lasting use as well as keeping the overall weight of your ride as low as possible, thanks to its lightweight profile. Based on bike-fitters feedback as well as pro-riders, this bar has been updated with the latest features that riders need to get soaring. Thanks to its new variable radius drop design, you can change to multiple hand positions when riding in the drops. This provides exceptional comfort for riders who like to reach down to the drops as well as riders who reach in. Showing off its 70mm reach which is the shortest of Zipp's Service Course series, you'll notice how easy it is to grab hold and start riding at the top of your game. Its 128mm drop places you low and in control without sacrificing comfort. To top it off, this sleek warrior comes ready to rock with a round top for that classic road bar feel and it's also clip-on compatible.
Featuring a high-quality carbon build, this road bike stem offers an excellent combination of stiffness, durability and low weight performance as it securely connects your handlebar to your fork's steerer tube. Thanks to its robust steel hardware, it also delivers a strong and reliable hold, wherever your next ride takes you. Another benefit is its matte finish with stealth decals, which gives your road bike's steering setup a sleek finish. Carbon Road Bike Stem with SRAM Exogram Technology The SL Sprint Stem is an ideal balance of stiffness and lightweight. The stem weighs in at just 1.8g per newton meter of stiffness using SRAM’s Exogram technology. Designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Zipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem. The SL Sprint comes with its own stem cap that’s designed to be aerodynamically efficient by blending into the stem body. Available in six sizes ranging from 90 to 140mm to meet any rider’s fit needs. Technologies: - Updated distinctive Zipp cosmetics. - Carbon Exogram™ construction delivers the stiffest stem on the market gram for gram. - Secure with four bolt faceplace using Torx© T25 bolt heads. - Matte Black finish. - Lifetime warranty. - Zipp Quickview integrated computer mount available separately. Manufacturer's Part Numbers: ZS8043000 Matte Black 90mm ZS8043001 Matte Black 100mm ZS8043002 Matte Black 110mm ZS8043003 Matte Black 120mm ZS8043004 Matte Black 130mm ZS8043005 Matte Black 140mm
This versatile seatpost is suitable for both road cycling and gravel adventure riding, thanks to its special shock-absorbing properties and increased comfort. Zipp has also put this model through a strict mountain bike (MTB) strength test, so you can enjoy offroad durability and support on your road or gravel bike. Benefitting from a unidirectional (UD) carbon construction, it provides the best balance of stiffness, strength and low weight performance as you conquer every mile of road. Another highlight is its AL7075 aluminium head and robust steel hardware, which ensures a tight and secure hold to your saddle rails whatever the terrain conditions. Adjustable Carbon Seatpost The carbon Service Course SL seatpost is specifically tuned to be more shock-absorbing than the “comfort” seatposts on the market, while still passing Zipp's strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you’ll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt head accessibility. With 0mm and 20mm setback options to choose from, it’s possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types. Technologies: - Distinctive Zipp cosmetics. - Unidirectional Carbon fiber tuned for ride comfort. - Lightweight clamping system. - Lifetime manufacturer's warranty. Manufacturer's Part Numbers: ZSP8056000 Matte Black 31.6mm x 400mm 20mm Setback ZSP8056001 Matte Black 25.4mm x 400mm 20mm Setback ZSP8056002 Matte Black 27.2mm x 400mm 20mm Setback ZSP8057000 Matte Black 31.6mm x 400mm 0mm Setback ZSP8057001 Matte Black 25.4mm x 400mm 0mm Setback ZSP8057002 Matte Black 27.2mm x 400mm 0mm Setback
This versatile stem features a unidirectional (UD) carbon construction, which allows it to deliver a fantastic combination of stiffness, strength and durability ride after ride. Zipp has also kitted out this version with a natural carbon matte finish for an extra layer of toughness without adding any unnecessary grams to your steering setup. Another benefit is its titanium hardware, which ensures a tight and secure connection when mounting the stem between your handlebars and your fork's steerer tube. As a result, it's suitable for a wide range of disciplines including road, gravel and cyclocross. Carbon Stem with SRAM Exogram Technology Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure and lightweight with a sleek design that compliments any bike. It’s a perfect addition to a mountain climber’s favourite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the SL Speed Stem weighs just 123g (100mm) while exceeding Zipp's stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider’s fit needs. Includes a stiff aluminium faceplate and titanium hardware Torx® T25 heads for precise torque readings and ease of adjustment. Technologies: - Updated distinctive Zipp cosmetics. - Designed using SRAM Exogram technology. - SL Speed Stem weighs just 123g (100mm). - ±6° carbon stem. - Secure with four-bolt faceplace using Torx© T25 bolt heads. - Matte Black finish. - Lifetime manufacturer's warranty. - Zipp Quickview integrated mount available separately. Manufacturer's Part Number: 00.6518.042.000 Black 70mm 00.6518.042.001 Black 80mm 00.6518.042.002 Black 90mm 00.6518.042.003 Black 100mm 00.6518.042.004 Black 110mm 00.6518.042.005 Black 120mm
This drop bar features a matte nano-blast aluminium construction, which makes it incredibly durable as you clock up the miles on the road. Its 80mm reach and 125mm drop combination is designed to fit a large number of riders and provide more efficient positioning on the bar tops, brake hoods or down in the drops. Comfortable Road Bike Drop Bar Designed for a comfortable and controlled experience, this drop bar allows for a neutral wrist position on the drops and a flat brake-hood transition. This minimises the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80’s rounded bar top is also clip-on compatible. Manufacturer's Part Numbers: ZHB8198000 Black Matte 36cm ZHB8198001 Black Matte 38cm ZHB8198002 Black Matte 40cm ZHB8198003 Black Matte 42cm ZHB8198004 Black Matte 44cm ZHB8198005 Black Matte 46cm
Ready for adventure, this drop handlebar features a robust aluminium construction for a fantastic balance of strength and durability as you explore gravel roads, forest paths and even singletrack. Zipp has also equipped this model with bar drops that provide a wider, balanced, and more secure position, with drops that are about 6cm wider than the hoods position for technical or intense riding. Another highlight is its ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul. Aluminium Drop Handlebar Zipp’s answer—true to the brand's fit-first philosophy for handlebar design—is an innovative all-road bar the Service Course SL 70 XPLR. The bar’s moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle from paved roads onto gravel, mud, dirt, and even singletrack. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal “comfort zone” position for hours of rough riding over mixed terrain. Today’s riders demand a few things out of their cockpit, whether they are doing a two-hour training ride from home or a 200-mile gravel adventure: comfort, control, and the ability to carry what they need. Zipp met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics—outsweep and flare. Technologies: - Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding. - The 70 XPLR also features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul. Manufacturer's Part Numbers: 00.6618.146.000 Black/Black 40cm 00.6618.146.001 Black/Black 42cm 00.6618.146.002 Black/Black 44cm