Convert 31.6 seat tubes to allow a 30.9 or 27.2 seat post. Alternatively convert a 30.9 seat tube to take a 27.2 seat post. The 90mm length provides plenty of support within your frame
Brand-X have partnered with South Korean lighting specialist LightSKIN to offer you a seatpost with a difference. Switch the light on and change modes with one short press of the 2nd LED. The post has 4 light modes and kicks out 25 Lumens offering eyecatching visibility as the nights draw in. Offering 10 hours battery life in continuous light mode and 50 hours in pulse mode, the Brand-X LightSKIN Seatpost is a workhorse and a minimilists dream. The post comes with a 2 metre micro usb charge cable allowing you to charge from home with the bike parked up. The charging port is located at the head of the post and is protected with a rubber cap Ideal for commuters and for those of us that that forget our lights or fear them being stolen.
Brand-X have partnered with South Korean lighting specialist LightSKIN to offer you a seatpost with a difference. Switch the light on and change modes with one short press of the 1st LED. Press and hold the LED to switch the light off. The post has 3 light modes and kicks out 25 Lumens offering eyecatching visibility as the nights draw in. Offering 50 hours battery life in continuous light mode and 100 hours in flashing the Brand-X LightSKIN Seatpost is a workhorse and a minimilists dream. Lightskin have geniune credibility in this area and won the Prestigious Red Dot design award with this very product. Install the batteries at the base of the post, attach your saddle with the single bolt seat rail clamp and ride in style. Ideal for commuters and for those of us that that forget our lights or fear them being stolen.
Suitable for use with 12mm thru-axles, it ensures a firm and reliable attachment for a confidence-instilling performance.
Building on the success of the original Ascend, Brand- X now offer a long drop externally routed option with the Ascend II XL. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing. The post comes with an ergonomic 1X lever. The cable is actuated from the mid cap ensuring zero cable movement. For those wishing to run a 2X set up, a right hand mount 'paddle' lever is available here: https://www.wiggle.co.uk/brand-x-ascend-lever-kit The Ascend Dropper seatpost set new standards for reliability and performance at a fantastic price point. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 489mm 170mm 100 138 30.9mm x 489mm 170mm 100 138 Service Guide Information Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.
The Brand-X Carbon ergo road racing bar is a compact bar that is designed from the ground up with ergonomics and comfort in mind featuring a compact ergo bend with a short 80mm reach and shallow 125mm drop. The UD Carbon construction features a textured finish in the stem and control clamping areas. The top section features an ovalized profile for increased comfort. Additional features include recessed channels for cable routing and centre markings for ease of set up.
This ergonomic shifter style remote lever is designed to be positioned where your front shifter would normally sit. This means that this kit is ideally suited for riders who are using a 1xchain ring set up, without a front derailleur. This stunning lever kit is compatible with all the Brand-X Ascend dropper posts and other cable actuated posts for a smooth and effortless operation. Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. To top it off, the cables can be installed at either end so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post.
Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can engaged/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 60g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 73g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 75g 4 SRAM 12x142mm 172mm 20mm M12x1.75 70g 5 SRAM 12x148mm 180mm 20mm M12x1.75 78g 6 RockShox 15x100mm 146mm 11mm M15x1.5 92g 7 RockShox 15x110mm 158mm 11mm M15x1.5 98g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 91g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 96g (*We recommend measuring the length of your existing thru axle before ordering) Compatibility Notes: Option 1 is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3 are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4 is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru axle with the M12x1.75 thread pitch. Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru axle with the M12x1.75 thread pitch. Option 6 is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7 is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8 is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch. Option 9 is for Fox Suspension forks with the Boost 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.
Featuring a leverless design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 31g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 40g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 42g 4 SRAM 12x142mm 172mm 20mm M12x1.75 42g 5 SRAM 12x148mm 180mm 20mm M12x1.75 43g 6 RockShox 15x100mm 146mm 11mm M15x1.5 65g 7 RockShox 15x110mm 158mm 11mm M15x1.5 69g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 63g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 67g (*We recommend measuring the length of your existing thru axle before ordering) Compatibility Notes: Option 1 is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3 are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4 is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru axle with the M12x1.75 thread pitch. Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru axle with the M12x1.75 thread pitch. Option 6 is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7 is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8 is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch. Option 9 is for Fox Suspension forks with the Boost Standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.
Strong, stiff and durable, this post is built to last. It also has a micro-adjustable 2-bolt clamp head that makes saddle installation easy and helps you to find the correct angle quickly. Available in a range of sizes to suit various frame's seat tube sizes, it has a stealthy black anodised finish with incremental markings to assist with setting saddle height. Options Explained: 350mm 27.2mm: 350mm long post with a 27.2mm diameter 350mm 30.9mm: 350mm long post with a 30.9mm diameter 350mm 31.6mm: 350mm long post with a 31.6mm diameter
Stealth Finish Manufactured for strength, stiffness and durability, this light and strong seatpost has a black anodised finish for an understated and stealthy appearance. It also features incremental markings to help you set your saddle height easily. Options Explained: 400mm 26.4mm: 350mm long post with a 26.4mm diameter 400mm 26.8mm: 350mm long post with a 26.8mm diameter 400mm 27.0mm: 350mm long post with a 27.0mm diameter 400mm 27.2mm: 350mm long post with a 27.2mm diameter 400mm 30.9mm: 350mm long post with a 30.9mm diameter 400mm 31.6mm: 350mm long post with a 31.6mm diameter
The Brand-X Classic Bar End is 3D forged from one-piece of 6061-T6 Aluminium and features a gentle curve for a comfortable riding position. They can be set at any angle and will fit securely on all handlebars.
In addition to the supportive shape and padding, there’s also a long central cut-out to relieve pressure from sensitive areas. It’s suitable for everything from XC, enduro or road riding and its durable, one-piece cover helps the comfort to remain consistent even in changeable weather.
This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
The top section of the bar features an ovalized profile for increased comfort. Manufactured from 6061 double butted aluminium with a shot peened finish for enhanced fatigue resistance and durability. An anodized black finish with subtle graphics provides an understated stealthy appearance. Please Note: These bars have a measurement of 42cm (centre to centre at the end) and at the hoods it`s 41cm.
The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Now available in both a 125mm and 150mm travel options, it allows riders to infinitely adjust their saddle height to suit the terrain ahead. Ergonomic Shifter-Style Dropper Remote The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that this dropper is ideally suited for those using a 1x chainring set up; without a front derailleur. However, a paddle style shifter is available separately for those who want to use the Ascend with a front derailleur and shifter. For installation, the seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again. Please Note: This Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated - for externally routed bikes, please see the Ascend II 105/125mm/150mm travel version). Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information Click here to view the Brand-X Internal Dropper Post 100,125 Service Guide. Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide. Installation Guide Information Click here to view the Brand-X Ascend Internal Route Post Installation Guide.
The head is offset by 22mm and features an adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.
In addition to the supportive shape and padding, there’s also a long central cut-out to relieve pressure from sensitive areas. It’s male-specific and suitable for everything from XC, enduro or road riding. Plus, its durable, one-piece cover helps the comfort to remain consistent even in changeable weather.