This freehub is specifically designed for use on the Brand-X Trail rear wheel. It comes complete with pawls, a spring and a bearing for straightforward installation. Genuine Brand-X spare part. How to replace the Freehub 1. Pull off hub end cap 2. Pull off freehub 3. Push on new freehub turning anti-clockwise 4. Refit end cap
Brand-X have partnered with South Korean lighting specialist LightSKIN to offer you a seatpost with a difference. Switch the light on and change modes with one short press of the 1st LED. Press and hold the LED to switch the light off. The post has 3 light modes and kicks out 25 Lumens offering eyecatching visibility as the nights draw in. Offering 50 hours battery life in continuous light mode and 100 hours in flashing the Brand-X LightSKIN Seatpost is a workhorse and a minimilists dream. Lightskin have geniune credibility in this area and won the Prestigious Red Dot design award with this very product. Install the batteries at the base of the post, attach your saddle with the single bolt seat rail clamp and ride in style. Ideal for commuters and for those of us that that forget our lights or fear them being stolen.
The Brand-X DH1 Full Face Helmet has been designed and developed by riders wanting to maximise comfort, style and safety. The ABS construction for the outer shell provides optimum protection for hard falls.10 pocket air vents coupled with mesh guards help to keep the air circulating without compromising safety. The visor is 10 degree height adjustable and can be fully removed. A goggle channel runs on the outer of the helmet allowing you to seat your goggle strap. Sealed anti-bacterial padding that is both removable and washable provides additional comfort and keeps things clean for future rides. The helmet secures with a padded chin strap and buckle. * Please note - we made an error on the product labelling and packaging regarding the sizing of this helmet. Website information is correct and this helmet is suitable for size range 53-58cm. Apologies for any misunderstanding- we will correct this for future orders.
Brand-X DH1 Full Face MTB Cycling HelmetThe Brand-X DH1 Full Face Helmet is styled for DH riding and forms part of the Brand-X Helmets range. A clean ABS construction with discreet graphics, keeping you safe on the trails and offering the quality of market-leading brands at a sensible price.The Brand-X DH1 Full Face Helmet has been designed and developed by riders wanting to maximise comfort, style and safety.The ABS construction for the outer shell provides optimum protection for hard falls.10 pocket air vents coupled with mesh guards help to keep the air circulating without compromising safety.The visor is 10-degree height adjustable and can be fully removed. A goggle channel runs on the outer of the helmet allowing you to seat your goggle strap.Sealed anti-bacterial padding that is both removable and washable provides additional comfort and keeps things clean for future rides.The helmet secures with a padded chin strap and buckle.**Please note - we made an error on the product labelling and packaging regarding the sizing of this helmet. Website information is correct, and this helmet is suitable for size range 53-58cm. Apologies for any misunderstanding- we will correct this for future orders.**FeaturesCE/ EN1078 certifiedSize: M: 53-58cmWeight: 829gBlack/ BlackABS outer shell10 vents with mesh guardAdjustable strapsSealed anti-bacterial padding- removable and washableDiscreet reflective graphicsRecyclable PackagingBuy Brand-X Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X DH1 Full Face MTB Cycling HelmetThe Brand-X DH1 Full Face Helmet is styled for DH riding and forms part of the Brand-X Helmets range. A clean ABS construction with discreet graphics, keeping you safe on the trails and offering the quality of market-leading brands at a sensible price.The Brand-X DH1 Full Face Helmet has been designed and developed by riders wanting to maximise comfort, style and safety.The ABS construction for the outer shell provides optimum protection for hard falls.10 pocket air vents coupled with mesh guards help to keep the air circulating without compromising safety.The visor is 10-degree height adjustable and can be fully removed. A goggle channel runs on the outer of the helmet allowing you to seat your goggle strap.Sealed anti-bacterial padding that is both removable and washable provides additional comfort and keeps things clean for future rides.The helmet secures with a padded chin strap and buckle.**Please note - we made an error on the product labelling and packaging regarding the sizing of this helmet. Website information is correct, and this helmet is suitable for size range 53-58cm. Apologies for any misunderstanding- we will correct this for future orders.**FeaturesCE/ EN1078 certifiedSize: M: 53-58cmWeight: 829gBlack/ BlackABS outer shell10 vents with mesh guardAdjustable strapsSealed anti-bacterial padding- removable and washableDiscreet reflective graphicsRecyclable PackagingBuy Brand-X Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X's Ascend CX Paddle Lever Kit includes the paddle lever, cable outer, cable inner, guide pipe with barrel adjust, cable end cap and cable barrel for post fitment. This kit allows the easy replacement of the ergonomic paddle lever.Material: T651-7075 AluminiumTo Fit: 31.8mm handlebar diameterBar mounted paddle style remote leverLinkage mechanism eliminates any outer cable pullCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised
The Brand-X Trail Wheelset HG Freehub is designed for use on the Brand-X Trail rear wheel. It comes complete with pawls, a spring and a bearing for straightforward installation. Genuine Brand-X spare part.
The kit includes paddle lever, cable outer, cable inner, guide pipe with barrel adjust, cable end cap and cable barrel for post fitment. Once fitted, it offers you effortless control of your Brand-X dropper post. Please note: This lever is designed for use on drop handlebar bikes, (cyclocross and gravel bikes), and will not fit on the lever clamp area of an MTB handlebar.
Brand-X Ascend Lever Kit - CX Paddle LeverBrand-X's Ascend CX Paddle Lever Kit includes the paddle lever, cable outer, cable inner, guide pipe with barrel adjust, cable end cap and cable barrel for post fitment. This kit allows the easy replacement of the ergonomic paddle lever.Please note: This lever is designed for use on drop handlebar bikes, (cyclocross and gravel bikes), and will not fit on the lever clamp area of an MTB handlebar.Features: Material: T651-7075 Aluminium To Fit: 31.8mm handlebar diameter Bar mounted paddle style remote lever Linkage mechanism eliminates any outer cable pull Cable operated Cable Length: 1.5m Finish: Sand blasted and hard anodised Warranty: 2 yearsBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X 10 Speed MTB CassetteSuitable for both mountain bike (MTB) and touring bike disciplines, this 10 speed cassette features a high tensile steel construction for maximum strength and dependability on your ride. It uses a standard Shimano HG spline with a tooth profile that's optimised to aid gear changes and reduce noise. This makes it an ideal choice of upgrade for replacing your old 10 speed cassette and benefitting from smooth and reliable performance.Features: Material: High Tensile Steel Use: Mountain bike (MTB), Touring bike Ratio: 11-13-15-17-19-21-24-28-32-36 Freehub Compatibility: Shimano type 9-11-speed freehubs Chain Compatibility: All 10-Speed chains Weight: 424gBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Brand-X Mountain Bike Riser bar comes in a trail friendly 740mm width, with 9 Degree backsweep and 5 Degree upsweep to ensure they are comfortable all day long. In order to make sure they suit your set up we also offer a 15mm or 25mm riser option. Manufactured from double butted 6061 Aluminium; they are both lightweight and strong. They feature a sand blasted and anodised finish for fatigue resistance and durability. All graphics are laser etched including centre and incremental markings to make positioning and cutting down nice and easy. Key Features: Material: 6061 double butted aluminium,Clamp Diameter: 31.8mm,Backsweep: 9°,Upsweep: 5°,Finish: Sand blasted and anodised for fatigue resistance and durability,Graphics: All laser etched that includes centre and incremental lines,EN-M Approved,Weight: 300g.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original.Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place.The lever sits on splines and can be engaged/disengaged to set the lever in your desired position once tightened in place.Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.
Brand-X Ascend Paddle Lever Kit (2x/3x Gears)Introducing the Ascend Paddle Lever Kit from Brand-X. The paddle style remote lever is ergonomically designed to sit next to your front shifter, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.Features:Material: AL7075-T651Bar mounted paddle style remote leverCable-operatedCable Length: 1.5mFinish: Sandblasted and hard anodised black2 Year WarrantyBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Introducing the Brand-X Ascend Paddle Lever Kit (2x-3x Gears). This ergonomic paddle style remote lever is designed to sit next to your front shifter, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.Material: AL7075-T651Bar mounted paddle style remote leverCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised black
Brand-X Ascend Lever Kit (1x Gears)Specifically designed for use with a Brand-X mechanical dropper seatpost, this gear shifter-shaped dropper lever has been ergonomically shaped for easy operation. Designed to replace a front gear shifter on your bars, it’s perfect for those running a 1x drivetrain (ie. without a front shifter or front derailleur.)Reasons to Buy: Ergonomically shaped for easy operation. Perfect for those running a 1x drivetrain.Features: Material: AL7075-T651 Cable Length: 1.5m Finish: Sand blasted and hard anodised black Bar mounted shifter style remote lever Cable-operated Requires dropper post internal cable routing Also suitable for use on other brands of cable operated droppers 2 Year WarrantyBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Mountain Bike Riser BarReady for whatever challenge you meed on the trail, the Brand-X Mountain Bike Riser bar is made from a durable double butted aluminium, for a strong, handlebar you can count on. Featuring a 740mm width, with 9 Degree backsweep and 5 Degree upsweep, you are ready no matter how rough the ride. They feature a sand blasted and anodised finish for fatigue resistance and durability. All graphics are laser etched including centre and incremental markings to make positioning and cutting down nice and easy.Features:Material: 6061 double butted aluminiumClamp Diameter: 31.8mmBacksweep: 9°Upsweep: 5°Finish: Sand blasted and anodised for fatigue resistance and durabilityGraphics: All laser etched that includes centre and incremental linesEN-M ApprovedWeight: 300gBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Twist Lever Thru AxleThe Brand-X Twist Lever Thru Axle is made from durable aluminium to ensure it is hard-wearing and ready for whatever challenges you meet on the trails. These Thru Axles from Brand-X are available at a price that won't break the bank and make an ideal alternative to your fork or frame's original.Optimised Lever DesignUnlike the common/standard bolt-thru axle, the Brand-X version has an easy to use, solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can engage/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features: Material: AL7075 Aluminium CNC Precision engineered Engage/ disengage twist lever Hollow for weight saving 6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications: Option 1: For solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3: For frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4: For frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 5: For frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 6: For standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7: For the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8: For Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 60g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 73g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 75g 4 SRAM 12x142mm 172mm 20mm M12x1.75 70g 5 SRAM 12x148mm 180mm 20mm M12x1.75 78g 6 RockShox 15x100mm 146mm 11mm M15x1.5 92g 7 RockShox 15x110mm 158mm 11mm M15x1.5 98g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 91g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 96g Buy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Twist Lever Thru AxleThe Brand-X Twist Lever Thru Axle is made from durable aluminium to ensure it is hard-wearing and ready for whatever challenges you meet on the trails. These Thru Axles from Brand-X are available at a price that won't break the bank and make an ideal alternative to your fork or frame's original.Optimised Lever DesignUnlike the common/standard bolt-thru axle, the Brand-X version has an easy to use, solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can engage/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features: Material: AL7075 Aluminium CNC Precision engineered Engage/ disengage twist lever Hollow for weight saving 6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications: Option 1: For solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3: For frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4: For frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 5: For frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 6: For standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7: For the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8: For Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 60g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 73g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 75g 4 SRAM 12x142mm 172mm 20mm M12x1.75 70g 5 SRAM 12x148mm 180mm 20mm M12x1.75 78g 6 RockShox 15x100mm 146mm 11mm M15x1.5 92g 7 RockShox 15x110mm 158mm 11mm M15x1.5 98g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 91g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 96g Buy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Brand-X Mountain Bike Riser bar comes in a trail friendly 740mm width, with 9 Degree backsweep and 5 Degree upsweep to ensure they are comfortable all day long. In order to make sure they suit your set up we also offer a 15mm or 25mm riser option. Manufactured from double butted 6061 Aluminium; they are both lightweight and strong. They feature a sand blasted and anodised finish for fatigue resistance and durability. All graphics are laser etched including centre and incremental markings to make positioning and cutting down nice and easy.
The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL7075-T651Bar mounted shifter style remote leverCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised black