Designed for use along with the Brand-X 12mm and 15mm thru-axles, this simple to use lever offers solid engagement with the axle and can be left in place as you ride or stashed away in your bag.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original.Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place.The lever sits on splines and can be engaged/disengaged to set the lever in your desired position once tightened in place.Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.
A hard-wearing and durable spare or replacement nut, this Brand-X model ensures a reliable connection to your thru-axle. Fit for use with 12mm thru-axles, it does a sterling job in keeping the axle firmly in place.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original.Featuring a leverless design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads.They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.
Alloy Quill adaptor for mounting an A-Head style stem with the older threaded fork and headset. Two sizes available: 150mm 22.2 - 28.6 (1" - 1.1/8") - Designed for a 1" threaded steerer,150mm 25.4 - 28.6 (1" - 1.1/8") - Designed for a 1 1/8" threaded steerer.
The Brand-X Enduro stem is 3d forged from aluminium to produce a stem, which is very strong and stiff yet still very lightweight. It is designed to use with a bar with a clamping zone of 31.8mm and is available in lengths of 40, 50 and 60mm. The Flip/Flop design allows the user to easily run it upside down to help keep the front end low; ideal for a 29” or 27.5” bike, where the front tends to be higher than you may want. Key Features: Sizes: 40mm, 50mm, 60mm,Rise: 3 degrees,Clamp Diameter: 31.8mm,Material:3D Forged Aluminium,Finish: Anodised,Colour: Black,EN-M Approved,Weight: 114g (40mm), 131g (50mm) and 134g (60mm).
The Brand-X stem is 3d Forged from Aluminium to produce a stem which is strong and stiff yet still lightweight. It is designed to use a bar with a clamping zone of 31.8mm and is available in lengths from a 90mm to 120mm. Our 7 Degree rise design will give you the option of a high (For Comfort) or low (Aerodynamic) handlebar position. Key Features: Sizes: 90, 100, 110, and 120mm Lengths,Rise: 7 Degrees,Clamp Diameter: 31.8,Material:3D Forged Aluminium,Finish: Anodised,Colour: Black,EN-M Approved,Weight: 162 grams (110mm).
The Brand-X stem is 3d Forged from Aluminium to produce a stem which is strong and stiff yet still lightweight. It is designed to use a bar with a clamping zone of 31.8mm and is available in lengths from a 60mm to 80mm.Our Flip/Flop design allows the user to easily run it upside down to help keep the front end low; Ideal for a 29” or 27.5” bike where the front tends to be higher than you would want. Key Features: Sizes: 60, 70 + 80mm,Rise: 7 Degrees,Clamp Diameter: 31.8,Material: 3D Forged Aluminium,Finish: Anodised,Colour: Black,EN-M Approved,Weight: 146 grams (60mm).
The Brand-X Ascend II is an externally routed dropper seatpost that offers excellent performance and reliability without breaking the bank. Tweak your saddle height for what lies ahead and tackle the trail in comfort.Externally Routed Dropper SeatpostBuilding on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic paddle style lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Key Features:Material: T6-6061 Aluminium,Bar mounted paddle style remote lever and cable operated external routing,Linkage mechanism eliminates any outer cable pull,Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism,Length: 400mm,Travel: 125mm (27.2mm = 105mm travel),Cable Length: 1.5m,Finish: Sand blasted and hard anodised,Warranty: 2 years,Weight: 610g (30.9mm) w/o cable and paddle shifter (90g),.Please Note: The 31.6 and 30.9 diameter options come with the 1x shifter style remote shown in the image, and are not suitable for use on bikes with 2X or 3X front gearing. Our current stock of the 27.2 diameter post comes with a 22.2 lever that is compatible with 2X or 3X front gearing.
Precision machined alloy Seatpost shim.Available in a wide range of sizes to adapt a 26.8mm or 27.2mm seatpost to fit a larger frame.90mm length provides plenty of support within your frame.
The Brand-X seat clamp is an Aluminium Quick Release Clamp which is available in Black or Silver and 28.6, 31.8 and 34.9 sizes and can be adjusted without the need for tools thanks to the barrel adjuster. The lever is ergonomically shaped and the mechanism uses a brass bush to make sure it has a smooth and consistent action which will last. Key Features: Sizes: 28.6, 31.8 and 34.9,Material: Aluminium,Finish: Anodised,Colour: Silver or Black,Weight: 40 grams.
The Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated.)The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter.The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point.Key Features:Bar mounted shifter style remote lever,Infinitely adjustable,Cable operated,Internal routing only,Linkage mechanism eliminates any outer cable pull,Zero Offset Head type,One Piece head/Upper Shaft,Micro Adjust clamping mechanism,30.9mm or 31.6mm Diameter,410mm Length,120mm Travel,Cable Length: 1.5m,Sand Blasted and Hard Anodised Black,2 Year Warranty,550g W/O Cable and Shifter (31.6mm).
This ergonomic paddle style remote lever is designed to sit next to your front shifter, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.Key Features:Material: AL7075-T651,Bar mounted paddle style remote lever,Cable operated,Cable Length: 1.5m,Finish: Sand blasted and hard anodised black.
Brand-X's Ascend Dropper Seatpost was so good they've decided to roll it out to the masses. The Ascend CX Dropper Seatpost is ideal for cyclocross, gravel, and road cyclists who feel the need to tweak their seatpost as they ride for customisable comfort.Smooth and Reliable Dropper SeatpostOperated easily via a paddle style remote on either side of your cockpit, the aluminium CX Dropper Seatpost is easily installed on bikes with internal cable routing. Cable actuated at the bottom of the dropper post via a linkage mechanism, the Brand-X dropper post eliminates cable pull/movement for a smooth and reliable performance.The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend CX Dropper Seatpost will carry on. Key Features:Material: T651-7075 Aluminium,Bar mounted paddle style remote lever and cable operated internal routing,Linkage mechanism eliminates any outer cable pull,Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism,Only compatible with internally routed bikes,Length: 458mm,Travel: 150mm,Cable Length: 1.5m,Finish: Sand blasted and hard anodised,Warranty: 2 years,.
The Ascend II XL externally routed dropper seatpost offers 170mm of travel. Ideal for taller riders or for those who like the added height adjustment, the Ascend II XL comes in new for 2019 and is available in both 30.9 and 31.6 seatpost diameters.Building on the success of the original Ascend, Brand- X now offer a long drop externally routed option with the Ascend II XL.The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing. The post comes with an ergonomic 1X lever. The cable is actuated from the mid cap ensuring zero cable movement. The Ascend Dropper seatpost set new standards for reliability and performance at a fantastic price point. Key Features: AL6061-T6,Bar mounted remote lever and cable operated external routing,Linkage mechanism eliminates any outer cable pull,Zero Offset one piece head/ upper shaft with micro adjust clamping mechanism,Diameter: 30.9mm or 31.6mm,Length: 489mm (shaft is 264mm), Travel: 170mm,Cable Length: 1.5m,Finish: Sand Blasted and Hard Anodised Black,2 Year Warranty,Weight: 670g (31.6mm without cable/lever).
Brand-X's Ascend CX Paddle Lever Kit includes the paddle lever, cable outer, cable inner, guide pipe with barrel adjust, cable end cap and cable barrel for post fitment. This kit allows the easy replacement of the ergonomic paddle lever. Key Features: Material: T651-7075 Aluminium,To Fit: 31.8mm handlebar diameter,Bar mounted paddle style remote lever,Linkage mechanism eliminates any outer cable pull,Cable operated,Cable Length: 1.5m,Finish: Sand blasted and hard anodised.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. Ergonomic Dropper SeatpostThis Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. Consistent PerformanceThe seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again. Key Features: Material: T651-7075 Aluminium,Bar mounted paddle style remote lever and cable operated internal routing,Linkage mechanism eliminates any outer cable pull,Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism,Only compatible with internally routed bikes,Length: 498mm,Travel: 170mm or 200mm,Cable Length: 1.5m,Finish: Sand blasted and hard anodised,Warranty: 2 years,Weight: 595g (w/o cable and shifter (30.9mm)).
The Brand-X Seat Clamp is simple, strong and lightweight. The collar is forged from 6000 series aluminium and uses a cro-mo bolt with 5mm allen key fitting to securely fasten your seat post at your desired height. It is available in 31.8 or 34.9 sizes and comes in durable anodised Black of Silver. Key Features: Material: 6000 Series Alloy,Sizes: 31.8mm or 34.9mm,Finish: Anodised black or silver finish,Weight: 20g.
The Brand-X Inline seatpost is manufactured from lightweight 6061-T6 Aluminium for strength, stiffness and durability. The 2D Forged Head and clamp feature a micro-adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black anodised finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily. Key Features: Length: 400mm,Layback: 0mm,Sizes: 26.4, 26.8, 27.0, 27.2, 30.9 and 31.6mm,Material:6061-T6 Aluminium,Finish: Turned and Anodised shaft/Anodised head,Colour: Black,Incremental height markings,EN-M Approved,Weight: 308 grams (31.6mm).
The Brand-X layback 6061 seatpost is manufactured from lightweight 6061-T6 Aluminium for strength, stiffness and durability. The Head and clamp is offset by 15mm and features a micro-adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black anodised finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily. Key Features: Length: 400mm,Offset: 15mm,Sizes: 27.2, 30.9 and 31.6mm,Material: 6061-T6 Aluminium,Finish: Turned and Anodised shaft/Anodised head,Colour: Black,Incremental height markings,EN-M Approved,Weight: 320 grams (31.6mm).