This tough and durable cone cup replaces the threaded cone cup which comes on pre-2013 Rock and Roll trainers, allowing you to mount Trek Speed Concept frames which require a smaller outside diameter cone cup. Using this cone cup saves your bodywork by giving a more efficient fit. Recommended for use with carbon-series bikes, it only needs to be used on the drive side of the trainer.
The Kinetic Wired Power Computer is designed to give you accurate power (watt) readings when you are using a cycle Trainer or just riding. All other functions (speed distance cadence etc) are accurate both on and off the trainer. Because of this the Kinetic Power Computer is an excellent choice for a cycling computer both on and off the trainer.The watts reading is calibrated based on a mathematical relationship between power and speed. This Kinetic Power Formula along with our proprietary software accurately estimates the cumulative effect of 16 different interactive forces. This power curve is based on the 'average ' rider on the 'outdoor ride' using the following cubic function: P = (5.244820) * S + (0.01968) * S3. S=speed in miles per hour P=power in WattsIN THE BOX:Computer Stem / Handlebar Mount Speed Transmitter w/magnet Cadence Transmitter w/Magnet Battery Cable Ties.Speed4 KeysAuto StartMax. SpeedSpeed bar (% of max. speed)Average SpeedSpeed ComparisonDistance 1Distance 2ODO 1ODO2ODO 1+2Ride time 1Ride time 2Distance CountdownTime to arrival (arrival time/time remain)% to arrival (Bar display)2nd Wheel sizeTime (12/24hr)Auto sleepStopwatchAuto Lap (Time/Distance)PowerMax PowerAvg PowerTemperature (C/F)Max TemperatureMin TemperatureEasy CaibrationService interval reminderEL BacklightCadenceAverage CadenceMax CadenceLow battery indication
The Twenty20 bottle Cage ergonomically improves the simple act of grabbing a drink on the bike. A natural arm motion removes and replaces a bottle at an angle of approximately 20 degrees offcentre. The Twenty20 Bottle Cage can be mounted on a bike frame at a 20-degree offset left or right - allowing bottle insertion into the centre of the cage rather than from the side.
The Shallow Cone Cup is a solution for Trek Speed Concept frames requiring a smaller outside diameter cone cup on the drive side of the trainer than the pre-installed cone cup. While the Standard Cone Cup (pre-installed on trainers manufactured after December of 2009)* will fit into the speed concept carbon frames it does rub on the drive side. So making a cone cup that has a smaller outside diameter fits better and prevents the carbon from getting marred. This product ships as a single cone cup. *The standard cone cup will fit the aluminum-framed Speed Concept series bicycles but we recommend using this specially-machined cone cup on carbon-series bikes. This cone cup will clear the frame flange and not mar the carbon. Use this cone cup on the drive side (side with chain) of the trainer. Replace only the drive side cone cup on the trainer. It is not necessary to replace both cone cups. Refer here for bicycle brand compatibility