Perfect for drive train maintenance. On virtually any design of bicycle the compact ds30blt simply lifts the rear wheel off the ground by attaching to the axle / skewer with non-scratching resin clamps. Suitable for wheel sizes 20”-27”/ 700c the ds30blt is also a great storage stand.
‘If you need space for that extra set of lights then there isn’t anything better’ Road CC. If you need extra cockpit space for lights or computers the new Minoura SG 400 Space Grips are now sleeker and more secure than ever. Now with a stronger clamping mechanism that can stay attached to the bike the Space Grip SG400 also has a sleek finish that enhances your handlebar space. Space Grips are so popular because they are so versatile!10cm wide with adjustable 'offset'.10cm length measured centre to centre.
THE MAG RISER LEVELS OUT THE FRONT END OF YOUR BIKE FOR TO SIMULATE A NATURAL RIDING POSITION DURING YOUR TRAINING SESSION. SUITABLE FOR WIDE 26' MTB OR NARROW 700C ROAD TYRES. THE WIDER DESIGN HAS A LOWER CENTRE OF GRAVITY FOR ADDED STABILITY.
Converts a thru axle hub from 15 / 20 mm to 9 mm standard Q/R.Allows truing stands to work with wheels with thru axle with adapters.One adapter each is required for both 15 mm and 20 mm. Compatible with Tru-Pro and FT-1 these adapters allow Thru Axle hubs/wheels to be used with these wheel truing jigs. Both 20mm and 15mm sizes x100mm
Whether you are mending cleaning or simply storing your bike this compact folding stand has a multitude of uses at both home and away. The wide leg base is super stable and clever folding design makes for optimum storage when not in use. Now with softer frame hooks that take care of your frame. Compatible with most frame types including road hard tail MTB and full suspension bikes. Just lift up the bike and place both seat-stay and chain-stay on the hooks then the bike stands alone stabley.The rear wheel is lifted up from the ground so good for light maintenance like cleaning chain or adjusting derailleur.The hook has been modified to be more gentle to the bike and easy to use.There are two hook installation points on the pillar. Depends on the bike size you can choose the best height by replacing the hook position. The height difference is 100mm.The pillar is foldable for compact storage when not in use. By pulling up the lock lever on foot of the pillar it will fold down. Features Keeps rear wheel off the ground Supports both chain-stay and seat-stay by hooks No need to open stand frame. Just lift up bike then hook Hook height is adjustable in 2 levels Quickly foldable for small storage Setup dimensions (when use) H = 570 mm W = 280 mm D = 370 mm (when storage) L = 610 mm W = 280 mm H = 110 mm Net Weight 1.0 kg
Minoura’s MagRide B60R has been updated for this season. The 7 level magnetic trainer comes with all the features you need to improve your training and fitness and easy enough to transport to events to use for warming up. With a wide range of resistance the MagRide B60R generates 425 watts of power at 25mph. The wide stable footprint as well as smooth and quiet roller action makes for an enjoyable indoor training experience. Fits a wide range of bikes from 24in to 700 x 45x tyres. The easy to use detachable remote lever helps you hit the right training zone just when you want it. FEATURES: 5 Generation Mag Turbo Easy to use detachable 7-step remote control lever 7 resistance levels Smooth and quiet ride Wide stable foot print Lightweight steel frame for easy transport and storage Minoura’s original ferrite magnet Compact and lightweight load device Lightweight and adjustable power Generates 425 Watt power at 25mph/40kmh (H range) 6 kgs dual steel disc flywheel Perfect for wide range of training session types warming up of general fitness Trainer skewer included Simple to use pressure knob Compatible with LiveTraining Kinomap & Zwift (when using compatible speed/cadence sensors) Made in Japan
The Bikehanger 4 is a scaled down version of the original Bikehanger made from highly durable steel with rubber coated hooks. It can be easily folded away when not in use and includes a helmet hook. Supplied with mounting screws.Maximum load capacity 20kg/44lbs.
If you need space for that extra set of lights, then there isn’t anything better’ Road CCIf you need extra cockpit space for lights or computers, the new Minoura SG 400 Space Grips are now sleeker and more secure than ever. Now with a stronger clamping mechanism that can stay attached to the bike, the Space Grip SG400 also has a sleek finish that enhances your handlebar space
Tablet holder for bike handlebar or round tube with a diameter between 28mm to 35mm ( for use indoors, only )FeaturesPerfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media,Mounts to repair stand so you can easily reference the Internet when working on your bike,Spring-loaded clamp system is simple to use and securely holds your device in place,Holds from a 7.9 to 9.7 inch screen ( change to additional short arm when use 7.9 inch model ),360 degrees rotation system with knob sets the TPH-1 in the perfect position,SM clamp easily mounts or dismounts from the handlebar or tube.Compatible device sizeDevice diagonal size : 280 mm - 320 mm,( Using additional short arm : 215 mm - 280 mm ),Maximum capable thickness : 10 mm.SpecsInstallable size28 mm - 35 mm (tube diameter).Weight241 grams.Warranty1 year.
FT-1 PRO PORTABLE WHEEL TRUING STANDFT-1 is a compact, lightweight, foldable yet sturdy wheel truing stand that can also be fixed to a workbench. Perfect for wheel repairs or builds at home or on the move.Check vertical and horizontal alignment. Compatible with road and MTB wheels up to 29”Portable Wheel Truing StandCompactly foldable lightweight wheel truing stand for consumers,Check vertical and horizontal shaking of bike wheel to fix it,In-detail instructions manual presents you working technique,Be aware that FT-1 is not a professional tool.SpecsMaterialSteel (Base) / Alloy (Pillar).Net Weight2.2 kgs (FT-1) / 2.6 kgs (Combo).Warranty1 year.Setup DimensionsH = 470mm x W = 220mm x D = 90mm x L = 85 – 190mm.
Compatible with Tru-Pro and FT-1, these adapters allow Thru Axle hubs/wheels to be used with these wheel truing jigs. Both 20mm and 15mm sizes.
Special Quick Release Skewer for Minoura TrainerThe coupling on every Minoura trainer is designed to fit this skewer head only,No problem on using this skewer even for on-road riding,Fits up to 145mm over-locknut size,Material : Steel,Shaft Length : 150mm,Net Weight : 100 grams.
The perfect wall mounted storage device for your bike, the unobtrusive Bikehanger can be neatly folded up when not in use.Rubber coated hooks for the bike and an additional hook for your helmet.Includes mounting screws.Max Load Capacity : 20kg / 44lbs
DS30BLT FOLDING STAND - DUAL SIZEPerfect for drive train maintenance on virtually any design of bicycle, the compact DS30BLT simply lifts the rear wheel off the ground by attaching to the axle / skewer with non-scratching resin clamps. Suitable for wheel sizes 20”-27”/ 700c, the DS30BLT is also a great storage stand.Standard Bike Storage StandSupports bike by clamping the rear wheel hub,Doesn't fit special quick release skewer such as Campagnolo or Fulcrum,HQ grade steel tubing frame lasts longer.Easy-To-Use Preset HeightsJust opening the frame until stops will present 2 different ideal stand heights,Taller position for 26"/700c, Lower position for 16" - 20",No need to micro adjust the opening angle every time you use the stand.SpecsWheel Size Capacity16" – 700c.MaterialSteel.Net Weight0.7 kgs.Warranty1 year.
DS520 FOLDING DISPLAY STORAGE STANDWhether you are mending, cleaning or simply storing your bike, this compact folding stand has a multitude of uses at both home and away. The wide leg base is super stable and clever folding design makes for optimum storage when not in use. Now with softer frame hooks that take care of your frame. Compatible with most frame types including road, hardtail MTB and full suspension bikes.Super Easy-To-Use Foldable Bike StandSupports both chain-stay and seat-stay by hooks,No need to open the stand frame. Just lift up the bike then hook it on,Hook height is adjustable in 2 levels,Quickly foldable for small storage.Specifications:Hook HeightHigh: 490/360mm, Low: 390/260mm.MaterialSteel.Net Weight1.0 kgs.Warranty1 year.
Minoura: The Minoura QR Skewer for enclosed dropout style features a coupling that is designed to fit every Minoura trainer.FEATURESThe coupling on every Minoura trainer is designed to fit this skewer head only,No problem on using this skewer even for on-road riding,Fits up to 145mm over-locknut size,Special design so that it fits Breezer drop outs as well.
Sometimes the simplest designs are the most innovative.Minouras Gravity Stand leans against a wall, using the weight of the 1 or 2 bikes that it can support to keep it in position.The Gravity Stand takes up little space and can be set up virtually anywhere.
Minoura: MagRiser block turns into a convenient handle for your Minoura trainer. Simple and effective, the MagRiser G correctly positions the front wheel of your bike allowing for a more stable and comfortable rideFEATURESCorrects the bike position on trainer to simulate natural riding position.,Dual tire design compatible with both 700c and 26”wheels.,Wide design with a low-centre of gravity for extreme stability.,Makes it easy to transport your MINOURA trainer with *quick release skewer..
Minoura Level-170H multi bike stand