Park Tool Tyre Lever Set TL-1.2This Tyre Lever Set from Park Tool is an essential kit for any avid cyclist. Made from durable glass-injected nylon for lasting quality you can count on, these levers raise the tyre away from the rim, protecting it from damage and preventing you from pinching the tube.Features:Material: Glass-injected NylonTough composite constructionEasy to useCan handle even the biggest trials tyresSet of 3Buy Park Tool Tyre Hook & LeversWorkshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Pre-Glued Super Patch Kit GP-2One of the most successful Park Tool products ever! Park Tool worked with 3M to produce a self adhesive tube patch that stretches, flexes, twists, and turns right along with the tube. No messy glue, no bulky packaging. Lightly roughen tube with the included sandpaper, clean, apply patch, and you're ready to go. Features:Includes: Six patches with sandpaper in a neat little carry along boxBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Tyre Lever Set (TL-4.2)An essential tool for every cyclist, this Tyre Lever Set from Park Tool makes removing tyres a breeze. Designed for tubless and tight beaded tyres, this set features an ergonomic design, with a flat tip to grip under your tyres, it also includes a spoke hook and comes in a set of 2. Features:Wide flat tip for easy entryErgonomic shapeSpoke hookSold in packs of 2Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Whether you're into road cycling or mountain bike (MTB) trail riding, these emergency tyre boots from Park Tool are specifically designed to quickly and securely repair a cut or worn sidewall on your tyre. This TB-2 model is produced using a strong, waterproof vinyl membrane with a fibre weave reinforcement for excellent durability in all-weather conditions. Another highlight is it comes equipped with a super-strong pressure-sensitive adhesive that assures each boot patch stays in place in any tubed tyre, road or mountain, high or low pressure. Simply place one of these patches over the cut or tear on the inside of your tyre and continue your ride without any worries. Coming as a pack of three tyre boot patches, each one measures approximately 76x45mm (3x1.75"). Manufacturer's Part Number: QKTB2C
The TL-4.2 features a wide, flat tip for easy entry and fast removal,Spoke hook to use when multiple levers are needed,Set of 2 levers.
Key Features: Genuine Park Tool replacement part.
Developed with 3M, this puncture repair kit features six self-adhesive tube patches that will twist, turn and flex with your tube to ensure you can confidently get back on the road after those annoying mid-ride tears and nicks have slowed you down. Park Tool GP-2 Puncture Repair Kit Being self-adhesive, the Park Tool GP-2 doesn't require any messy glue to hold firm and comes in a neat carry box for compact and dry storage in your kit bag. With six patches plus a sandpaper square for easy application, no rider should leave home without this superb tyre first-aid kit. Manufacturer's Part Number: QKGP02C
Saves wear and tear on your chain and freewheel. Works great on brakes or other places where dirt collects.
Park Tool Gear Clean Brush GSC-1 Park Tool’s GSC-1 GearClean® Brush has a unique design. A large comfortable handle with a curved, toothed-end reaches dirt deep between the gears, and tough nylon bristles clean the derailleur and chain.Saves wear and tear on your chain and freewheel. Works great on brakes or other places where dirt collects.10 speed compatible Handy size for quick cleaning anywhere Made of sturdy nylonBuy Park Tool Gear Clean Brush from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool CTPC - Pair Of Replacement Chain Tool Pins fit Park Tool s CT1, CT2, CT3, CT5 and CT7 Chain Tools. Made from hardened alloy tool steel.
The Park Tool RR12C is a small and handy measuring tape. The RR-12 features a tough, composite housing and both metric and English readings up to 12 feet (3.65m).
The Park Tool patented GSC1C Gear Cleaning Brush has a unique design. A large comfortable handle with a curved, toothed-end reaches dirt deep between the gears, and tough nylon bristles clean the derailleur and chain. Saves wear and tear on your chain and freewheel. Works great on brakes or other places where dirt collects. 10 speed compatible. Handy size to take along for quick cleaning anywhere. Made of sturdy nylon.Designed Keep your Transmission CleanCurved and Toothed EndStiff Nylon BristlesSuitable for Other Hard to Reach Places
The Park Tool HR8C is a long-handled L-shaped wrench for installing and removing crank bolts with an 8mm socket. Made from industrial quality high torque steel and through hardened for long life. Speed Bearing attachment for quick installation and removal of long threaded bolts.
The CNW-2 makes chain ring bolt installation and removal easyIt securely holds the slotted nut to prevent spinning when tightening or loosening the boltDouble-ended to fit most slotted-type nuts
If you've got the Park Tool HMR4 then you'll know exactly how useful the hammer is in the workshop. If the persuader is one of your favourite tools then having a spare head is always going to be a good alternative to buying a new hammer, just replace the important bit and get back in the workshop with a rejuvenated feel.
The Park Tool TR1C brings together our popular GP-2 Super Patch Kit and TL-1 Tire Levers as a kit. The kit consists of three tire levers and a box with six patches and one piece of sandpaper on a blister card.
Small and handy, a 3.65 metre retracting tape measure with both Metric and Imperial measurement readings, all inside a tough composite housing.
Replacement part for: CT-1 CT-2 CT-3 CT-3.2 CT-5 CT-7
These Park Tool SD series of screwdrivers are shop quality screwdrivers designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts.SD-0: No:0 Phillips SD-2: No: 2 PhillipsSD-3: 3mm flat bladeSD-6: 6mm flat blade
Park Tool Replacement Chain Tool Pins (CTP)If you regularly service bikes, you might wear down or even break the pin on your find the Park Tool chain splitter/joining tool. This pack of Replacement Chain Tool Pins suit a wide range of Park Tool’s models and will get yours working like new again. They are simple to fit and are made from hardened alloy tool steel.Features: Material: Hardened Alloy Tool Steel Compatibility: Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5 and CT-7 chain tools Pack of 2 Easy to installBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.