Park Tool I-Beam Multi-Tool IB-2Park ToolI-Beam Multi-Tool IB-2Strong, compact, and lightweight, the IB-2 is a great tool for taking on the road or trail. The IB-2 features Park Tool’s unique I-Beam handle with 10 tools.Features:2, 2.5, 3, 4, 5, 6 and 8mm forged hex wrenches, T25 Torx® compatible star-shaped driver, and a straight blade screwdriver IB-12 is nominally, 75mm long, 40mm wide, 18mm thick Weight: 108gBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Use with any 3/8 inch drive torque wrench to verify pedals are torqued to the correct specLaser cut heat treated and plated for long lifeMade in the USA and covered by Park's legendary limited lifetime warranty
Park Tool Supergrip Carbon/Alloy Assembly CompoundThe Supergrip Carbon Assembly Compound helps create a tighter grip between two slippery surfaces, this means you don't have to apply as much torque to the bolts to get a non slip fitment, this greatly reduces your risk of damaging parts by over tightening. Can be used on carbon, aluminium, and steel.Features: 4 oz. (113 g) tube Easy applicator spout Ideal for carbon, aluminium, and steel seatposts, handlebars, and stemsNOTE: All assembly compounds of this type hold by using grip aided by small bits of hard silicone. This silicone can cause cosmetic blemishing. Do not use SAC-2 on threaded parts or for bearing lubrication.Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Creates a tighter grip between surfaces reducing the amount of clamping force needed to safely secure a componentIdeal for carbon or lightweight alloy handlebars stems and seatpostsWith more and more manufacturers specifying that assembly compound be used when assembling their components make sure that you are not invalidating your warrantyAn essential addition to any modern mechanic's workbenchNot for use on threaded surfaces
Key Features: Fills gaps and helps retain non-threaded parts like press fit bottom bracket parts, sealed bearings, etc,Competes with Loctite® 290,10ml bottle,Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fibre surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
Can be used on carbon, aluminium, and steel.
The IB-2 features Park Tool’s unique I-Beam handle with 10 tools.
The Park Tool HCW11 Slotted Bottom Bracket Adjusting Cup Wrench 16mm is a popular and versatile Crank Wrench features our proven Y head design. The HCW11 is double ended tool which saves space in the workshop and features a 16mm slotted and raised open end and a double pin lockring end suitable for older style bottom brackets.
A compact and value for money 15mm pedal spanner. No need to struggle with the wrong size spanner or bashed knuckles any more Perfect for the home workshop or event tool box Made from heat-treated spring steel with a vinyl dipped handle for extra comfort Made in the USA and covered by Park Tool's legendary limited lifetime warranty
Three hex wrenches in an effective packageExcellent ergonomics and effective leverage as the composite centre fits into the palm of the handSpeeds any job up as you have three hex keys in your hand at any one timeMade from heat-treated Bondhus Protanium high torque steel for a long life4 5 and 6 mmMade in the USA and covered by Park Tool's legendary limited lifetime warranty
Specially designed for cranks Freehubs and pedals the hex tool is built for speed leverage and comfortThe dual density ergonomically designed screwdriver handle provides secure grip and is moulded over an extra long extra deep super strong hexAlso features an additional ball-driver for those really hard to reach boltsIt may just be your new favourite tool
The Park Tool Sliding T-Handle Torx Wrench is a professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. Carefully selected combination of Chrome Vanadium and S-2 tool steelsUnique anodized aluminium Speed Spinner makes running long bolts in and out quick and effortlessSliding T-handle creates increased leverage and multiple access positions
Made from investment cast steel, the Park Tool BBT-22 utilises a flat tooth profile on its 20 teeth to ensure maximum engagement with the bottom bracket (BB) cups. A Park Tool Octalink bb removal tool or FSA bb removal tool, it’s the perfect addition to your bike tool servicing kit. This tool can be used with a 3/8” drive torque wrench, 3/8” ratchet driver, 32mm wrench, FRW-1 Freewheel Remover Wrench, or a 1” wrench.
Park Tool Bottom Bracket Tool (BBT-22)The professional-level BBT-22 tool is a tough and long-lasting steel socket and it's ideal for extracting even the most stubborn bottom brackets and fitting new ones. Park Tool gave it flat splines to combine accurately with compatible models, giving you a reliable grip as you're loosening or tightening.This tool is compatible with Shimano Octalink and FSA ISIS Drive splined 20-tooth bottom bracket cups and can be used with a 3/8" drive torque wrench, a 3/8" ratchet driver, a 32mm wrench, a Park Tool FRW-1 Freewheel Remover Wrench or a 1” wrench.Features: Material: Investment Cast Steel The BBT-22 replaced the BBT-2, and will fit all bottom brackets serviced by the BBT-2 The twenty tooth pattern is used on a wide variety of bottom brackets, including models from Shimano®, Truvativ®, Race Face®, FSA®, and others The tool clears the oversized spindles of ISIS Drive and Octalink Can be used for removal and installationBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool HR11, HR12 and HR14 Hex Wrenches are necessary for removing the freehub bodies from several popular brands of hubs (Mavic, Sun Race, Sovos, and others).Park Tool HR11, HR12 and HR14 are through hardened industrial quality steel with chamfered tips for a precision fit.
The Park Tool SS15C is designed and built especially for single speed bikes, a forged multi purpose ride saver. Combining a 15mm socket for axle nuts, 15mm open end spanner for pedals, the tool also doubles up as a tyre lever and bottle opener. Just the right size and length (17cm/7") to take along or to wrench in the garage, the "SS" is destined to be a single speeders favourite.
At the smaller end of this specific Park Tool device, you will be able to get to work on 7-spline nipples measuring a 6.4mm outside diameter, such as those found on R-sys wheels. At the larger end is a wrench head capable of fitting 6-spline 9mm FORE drilled rim adapters found on the likes of the Mavic XM819, EX823 and Speedcity wheels. Precision machined and plated for durability and quality, with a vinyl dipped handle for great grip and handling comfort, the Double-Ended Spoke Wrench SW-12 is a great functioning, a specialised tool from Park Tool.
Park Tool Double Ended Spoke Wrench (SW-12) Built with Mavic wheels with M7 nipples in mind, the Double Ended Spoke Wrench SW-12 from Park Tool is the ideal tool for adjusting spoke tension and alignment in those particular wheels. Long-lasting and Well-Crafted Spoke Wrench Being manufactured by Park Tool, quality and longevity are assured thanks to the precision machined and plated construction of the tool. Vinyl dipped for a comfortable grip when in use, both ends of the wrench will efficiently get to work on your Mavic spokes. The smaller end is compatible with 7-spline nipples sized at 6.4mm outside spline diameter, as found on R-sys wheels. The larger head will fit 6-spline 9mm FORE drilled rim adapters, like those on rims such as Mavic XM819, EX823 and Speedcity wheels. Matching the size of the Mavic 108 471 01 wrench, the Double Ended Spoke Wrench SW-12 is a great alternative for the Park Tool die-hard. Features: Material: Forged Industrial Tool Steel Head Fitting Sizes: Small End - 7-Spline, 6.4 mm, Large End - 6-Spline 9mm Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Scissors (SZR-1) A decent pair of scissors is a must for any workshop/garage mechanic or amateur tinkerer, so with the Scissors SZR-1, Park Tool have created a sturdy and robust set of snippers to deal with any cutting jobs you need to carry out. Shop Quality Scissors Emblazoned in Park Tool's signature blue and black, the thick and comfortable dual-density handles provide fantastic grip and a controlled cutting-action. The blades themselves are made of stainless steel and branded with the Park Tool logo for additional quality tool assurance. Ideal for cutting through boxes, bar tapes, cable ties, handle grips and anything else that needs to be sliced, the Scissors SZR-1 are a cut above. Features: Material: Blades - Stainless Steel, Handles - Dual Density Construction Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Cassette Lockring Tool FR-5.2GTThis Cassette Lockring Tool from Park Tool has been designed to easily remove and install lockrings on hubs. Suitable to be used with a variety of cassettes and disc brakes, this versatile tool is ready for the task. Shimano, SRAM and SunRace CompatibleStabilised by a strong 12mm guide pin, the tool fits 12mm thru-axles and ensures a proper and true fit. The depth of the 12-splines on the tool also allows for solid engagement in any compatible lockring. Suitable for use with 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others (23.5mm diameter), as well as other Shimano and similar disc brake rotor lockrings, the Cassette Lockring Tool FR-5.2GT is a must for any mechanic's workshop.Features: Compatibility: Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) + Shimano and similar disc brake rotor lockrings Hex-shaped base of tool fits 1" (25.4 mm) socket or wrenchGuide Pin Size: 12 mm Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.