Park Tool Magnetic Parts Bowl (MB-1)An ideal tool for your workshop, this Magnetic Parts Bowl from Park Tool keeps all your parts safe and secure when undertaking essential maintenance work. Featuring a powerful magnet to stop your parts from being misplaced, it comes in Park Tool's iconic shade of blue. Features:Colour: Park Tool BlueDimensions: 15cm diameter Buy Park Tool Workshop Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool MB-1 features an extra strong magnet, so you can rely on it to keep your tools and component parts held together securely. As a manufacturer of bicycle-specific tools since 1963, you can safely rely on Park Tools' many years of experience. The World's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.
Park Tool Chain Checker CC-3.2This performance and time-saving Chain Checker CC-3.2 from Park Tool helps you detect where exactly your chain needs changed. Accurate and Simple Wear IndicatorA 'go/no go' chain wear indicator, the CC-3.2 is an easy to use tool for making sure your chain is in top condition or to let you know when to replace it. One end of the tool hooks into your chain for stability while the other will either stay supported by the link it reaches if there is no wear or will fall flush into the link if wear is found. Set to measure at 0.5% and 0.75% wear, as this is when most manufacturers recommend changing your chain, the Chain Checker CC-3.2 will not only keep on top of your chain's performance but will also protect your sprockets from any associated wear.FeaturesCompatibility: All 1/2" Pitch Chains from 1-12-Speed (Check with manufacturer for exact replacement specifications and instructions)Optimum Replacement Measurements: 9 and 10-Speed Chains - 0.75% Side, 11 and 12-Speed Chains -0.5% SideBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool HT series is specially designed for cranks, free hubs and pedals. The HT tools are built for speed, leverage and comfort. Our dual density, ergonomically designed screwdriver handle moulded over an extra long, extra deep, super strong hex. It may be your new favourite tool!
The Ratcheting Wrench from Park Tool is a combination metric wrench with both an open and 12-point two way ratcheting box end.This wrench has been constructed from vanadium steel which has then been chrome plated and polished giving you a high strength, high quality finish.The wrench is finished with a Park Tool blue vinyl which gives a secure positive grip. This is a world-famous Park Tool quality wrench which will last you a lifetime.
Park Tool Bottom Bracket/Cassette Tool BBT-5/FR-11Specially created by Park Tool to suit Campagnolo’s bottom brackets and cassette lockrings, the BBT-5/FR-11 bike tool is an essential workshop addition. Made from tool-specific alloy steel, it’s made for repeated use and its large nut-style base makes it easy to use with wrenches or your vice, enabling you to get the grip you need to remove stubborn components. Plus, despite its high strength, Park Tool gave it thin-walled sides, so you can easily remove cassettes without the need to disassemble the hubs axle.Features: Material: Heat Treated Alloy Tool Steel Fits all Campagnolo cassette lockrings Also fits Campagnolo Record, Chorus, Centaur, and Athena bottom brackets The outside diameter of the BBT-5/FR-11 is 22.8mm and has 12 splines Always use a skewer or axle nut to hold the tool firmly in place during removal and installation Centre bore for axle or spindle clearance is 16mmBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Ratcheting Wrench from Park Tool is a combination metric wrench with both an open and 12-point two way ratcheting box end.This wrench has been constructed from vanadium steel which has then been chrome plated and polished giving you a high strength, high quality finish.The wrench is finished with a Park Tool blue vinyl which gives a secure positive grip. This is a world-famous Park Tool quality wrench which will last you a lifetime.
Park Tool Shop Cone Wrench (SCW)The standard of the industry, Park Tool Shop Cone Wrenches (SCW) are now available in a 23mm size to fit Shimano 15mm thru axle hubs. Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality.Features:Long, vinyl dipped handle for leverage and comfortable useThin enough to use on the narrowest of adjusting conesBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Shop Cone Wrench (SCW)The standard of the industry, Park Tool Shop Cone Wrenches (SCW) are now available in a 23mm size to fit Shimano 15mm thru axle hubs. Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality.Features:Long, vinyl dipped handle for leverage and comfortable useThin enough to use on the narrowest of adjusting conesBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Spoke, Bearing and Cotter Gauge SBC-1This handy shop aid is ideal for sizing spokes, ball bearings and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale.For crank cotters and ball bearings it works just like a gauge for drill bits. Spoke lengths are in both metric and fractional markings. Made of anodized aluminum with embossed markings to allow easy reading and long life.Buy Park Tool Workshop Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: Industry standard cone wrenches with unmatched performance,The Y-head design puts material where it is needed for strength and durability,Military grade phosphate finish ensures an accurate fit and consistent quality,Thin enough to be used on the narrowest of cones,High strength tool steel,Long vinyl dipped handle for leverage and comfort,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
A worn chain shifts poorly and wears sprockets at an accelerated rateThe CC-3 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.75% and 1% wear - the point at which most chain manufacturers suggest replacementThe chain should be replaced soon if the 0.75% side fits into the chain, before other drive train components also start to wear out fastIf the 1% side fits into the chain, the chain is worn out and should be replaced immediatelyMade from precision, laser cut steelConsider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too10-speed compatible
To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings, it works just like a gauge for drill bits.
Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality.
Park Tool Bladed Spoke Holder BSH-4 A simple yet essential tool for keeping your spokes in check when truing your wheels, the Bladed Spoke Holder BSH-4 will ensure no twists or bends during realignment. Valuable Wheel-Building Aid Suitable for holding a variety of different sized bladed spokes, the holder is equipped with 4 slots to holder your spokes in place while vital repairs are made. It also doubles up as a bladed spoke straightening device when used in conjunction with a spoke nipple wrench, to make sure your wheel remains a wind-cheater and not an egg beater. The Bladed Spoke Holder BSH-4 may look basic, but it proves its worth in keeping your wheels and spokes in check. Features: Compatibility: Spoke Blades from 0.8 mm to 2 mm Width Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fitted with four slots to hold a variety of different sized spokes, the BSH-4 ensures they stay strong and in place while you go about your necessary realignment. Pulling double duty as a spoke straightener when used alongside a spoke nipple wrench, the Bladed Spoke Holder BSH-4 from Park Tool does all it can to make sure your spokes and wheels remain in check.
A must have bench top accessory that keeps small parts accessible and all in one place15 cm diameter parts bowl with an extra strong magnet to stop you loosing vital component parts on the floor, under the workbench, or in the grass
Park Tool Pin Spanner (SPA-2)Bringing you excellent versatility at a budget-friendly price, the SPA-2 Pin Spanner works on a wide range of crankset lock rings and freewheel cone adjusters. Made from durable carbon tool steel that’s dipped in vinyl for a comfortable grip, Park Tool colour codes each tool so you can quickly find the size you need.Features: Material: Carbon Tool Steel with Vinyl-dipped handle Fits one-key release retaining rings on Shimano® and Campagnolo® cranksets and the adjusting cone on most freewheel clusters (not freehubs) Adjusts to a wide range of pin hole widths Pin diameter is nominally 0.090" (2.3mm)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Part of a range of taps to cover all normal needs on a bikeMade of high carbon steel, precision ground and hardenedFor cleaning out and repairing threadsFits into any conventional tap handle10 x 1 mm size is for derailleur hanger.
Key Features: Industry standard cone wrenches with unmatched performance,The Y-head design puts material where it is needed for strength and durability,Military grade phosphate finish ensures an accurate fit and consistent quality,Thin enough to be used on the narrowest of cones,High strength tool steel,Long vinyl dipped handle for leverage and comfort,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.