Key Features: 3 layer softshell fabric with fleece liner, Compression cuff, Dual-layer palm, TPRs for protection, Silicone fingertips for lever grip, Touchscreen compatible index and thumb.
Troy Lee Designs gloves are all researched, designed and meticulously tested before they make their way on to the hands of great athletes around the world. The SE Pro Glove features a compression-molded cuff and a single layer palm with laser perforated holes for breathability. Extra protection on the hand is provided by the sonic welded TPRS on the back of the hand and the silicon print offers a grippy spot on the brake lever.
Troy Lee Gloves are all researched, designed and meticulously tested before they make their way on to the hands of great athletes around the world. Our acute attention to detail paired with a fearless sense of style and design make for a superior quality product. With a vast selection of colours, construction and levels of protection, there is a perfect fit for every individual. Key Features:Self dyed 2-way stretch spandex body ,Perforated synthetic leather palm ,Sonic-welded TPR graphics on top of hand and fingers (on solid graphics only) ,Velcro wrist closure .
Troy Lee Designs gloves are all researched, designed and meticulously tested before they make their way on to the hands of great athletes around the world. The Flowline Glove features an adjustable velcro cuff and a single layer palm with laser perforated holes for breathability. Micro-mesh is used all over for added ventilation. Index and thumb are touch screen compatible. Key Features: Fabric Cuff,Bottom velcro closure,Single layer perforated palm,Fabric,Lever grip single layer perforated fabric,Conductive index & thumb.
Troy Lee Designs gloves are all researched, designed and meticulously tested before they make their way onto the hands of great athletes around the world. The Air Glove features a compression-moulded cuff and a single-layer palm with laser perforated holes for breathability. Micro-mesh is used all over for added ventilation. Silicon print on finger offers a grippy spot for brake lever grip.Key Features: Compression moulded cuff,Top Velcro closure,Single layer perforated palm,Finger protection 2 inner TPR,Lever grip 2 silicone fingertips,Micro-mesh ventilation.
The Troy Lee Designs Scout Gambit Gloves are tough enough to take on any off-road challenge, while also being super comfortable to wear. Sturdy, abrasion resistant D3O material coats the knuckles, while the fingers gain added protection from tough TPR pads that nonetheless permit full movement. Made from 3-layer softshell fabric, with a dual-layer palm to mute trail chatter, act as a second skin, and allow air to circulate through laser-cut perforations, they’re lined with soft fleece that will keep your hands cosy. A compression moulded cuff with Velcro® closure ensures a snug but gentle fit around the wrist, while silicone printed fingertips make it easy to grip the brakes and handlebars to maximise control of the bike.Finally, if you’re having such a great day adventuring that you want to stay out for longer, a touch-screen compatible index finger and thumb will let you text you message home and send a breath-taking pic of your surroundings to more than justify your enthusiasm. Key Features:Constructed from weather-resistant softshell fabric,A compression moulded cuff and breathable dual-layer palm promote comfort,Velcro closure,D3O knuckle protection, TPR finger protection,Silicone print fingertips aid grip,Index finger and thumb are smart phone compatible.
The Troy Lee Designs Youth GP Gloves, like the rest of the TLD glove range, have been rigorously tested and honed to offer a perfect fit and great style to budding mountain bikers. The tough, dual-layer palms act as a second skin and mute trail chatter, while laser cut holes will allow air to circulate freely and ensure their hands will stay dry for the duration of the session. A TPR index finger will protect their most exposed digit, while being flexible enough to allow free movement. Meanwhile, silicone printed fingertips will let them jump and rip up the trails as powerfully as they like, keeping a firm grasp of the brakes and handlebars all the while. Available in a range of cool colours, these gloves will give your up-and-coming DH star the confidence they need to enjoy the ride and put in their best performance on the trails. Key Features:Tough dual-layer palm with mapped laser hole perforation for breathability,TPR index finger offers protection while maintaining flexibility,Silicone printed fingertips make it easier to grip.
Key Features: Single layer palm with laser hole perforation, Slip on design, Index & thumb touch screen capability .
Troy Lee Designs gloves are all researched, designed and meticulously tested before they make their way on to the hands of great athletes around the world. This three-layer softshell fabric has a soft fleece liner. The dual-layer palm mutes the trail chatter and the D3O knuckle protection adds a barrier against abrasions and branch strikes. Key Features: Compression molded cuff, Velcro closure, Single layer perforated palm, Finger protection 4 Knuckle / 1 Finger TPR, 2 silicone print fingertips, Articulated D3O knuckle, Conductive index & thumb.
The Stage Helmet. Less Weight, More FunSince its debut, the Stage helmet redefined mountain bike safety, style, comfort and ventilation. The lightest full-face helmet in its class combines MIPS (Multi-directional Impact Protection System), EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that sets the standard for mountain bike enduro helmets. A Polylite shell w/fiber reinforcement and Polyacrilite injected chin bar w/EXOskeleton adds strength without sacrificing weight. 11 high-flow air intakes and 14 exhaust ports and large ventilation chin bar openings aid in cooling and comfort in all conditions. The TLD Stage Helmet also includes an X-Static® helmet liner that is moisture-wicking, quick-drying and odor-fighting. A Fidlock® buckle and lightweight hardware round out the overall package. Key Features: Intended for Enduro and All-Mountain use,Polylite Shell construction with fiber reinforcement,Dual-density EPS and EPP foam offers protection against high and low-speed impacts,Featuring MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the head,Large ventilation chin bar opening and 11 high-flow intake ports and 14 exhaust vents,Contoured 3D XT2 cheek pads and washable X-Static liner create an optimized fit,Helmet includes 2-liners, 3-sets of cheekpads and 2-neck rolls for a custom fit ,Innovative break-away visor screws,Fidlock® magnetic buckle system, Drawstring bag with breathable mesh paneling,CPSC 1203*, CE EN1078*, ASTM F1952-DH, ASTM 2032-BMX, *Varies by regional standards.
The Troy Lee Designs Stage full face helmet with MIPS is a lighter, cooler and more protective enduro racing package than anything previously created.The Stage combines MIPS (Multi-directional Impact Protection System), EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that sets the standard for mountain bike enduro helmets.A Polylite shell with fibre reinforcement and Polyacrilite injected chin bar with EXOskeleton adds strength without sacrificing weight.11 high-flow air intakes and 14 exhaust ports and large ventilation chin bar openings aid in cooling and comfort in all conditions.The TLD Stage Helmet also includes an X-Static® helmet liner that is moisture-wicking, quick-drying and odor-fighting. A Fidlock® buckle and lightweight hardware round out the overall package.Key FeaturesPolylite Shell construction with fibre reinforcement,Dual-density EPS and EPP foam offers protection against high and low-speed impacts,Featuring MIPS Brain Protection System: a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the head,Large ventilation chin bar opening and 11 high-flow intake ports and 14 exhaust vents,Contoured 3D XT2 cheek pads and washable X-Static liner create an optimized fit,Innovative break-away visor screws,Fidlock® magnetic buckle system,Includes TLD helmet bag.
The D4 Carbon helmet is the latest in the legendary Troy Lee Designs Daytona series. The D4 Carbon builds on the success of the best full face helmets ever to be the most advanced downhill, freeride, and BMX helmet going. It is sure to continue the legend and pro success of Troy Lee Designs D3 and is the go-to for anyone seeking the very best.The D4 Carbon helmet has a TeXtreme carbon fibre shell. The carbon has a spread tow construction that uses straighter fibres than standard carbon fibre. This results in a thinner laminate that reduces weight while achieving a greater rigidness, increased strength, and improved impact tolerance.The MIPS Brain Protection System in the D4 means the Troy Lee helmet delivers ultimate protection. MIPS is a layer in the helmet that allows the head to slide relative to the helmet. This reduces any rotational movement that would affect the brain.A collarbone suspension system improves safety by directing pressure away from the collarbone in case of any tumbles.As a result, The D4 has the most protective energy system Troy Lee Designs has ever given its riders. The new full face mtb helmet is certified to CPSC 1203, CE EN1078, ASTM F1952 (DH), and ASTM 2032 (BMX) safety standards.Top protection, badass looks, and a pedigree that no one can touch. The D4 is set to continue Troy Lee Design’s legacy for years to come.Key Features:TeXtreme® Spread tow carbon fibre shell,MIPS Brain Protection System,Ventilation channels and headliner promote airflow,Lightweight titanium D-rings and hardware,Collarbone suspension system,Break-away visor screws,Quick release XT2 3D cheek pads and X-static/XT2 washable liner,Includes TLD drawstring helmet bag,1000g.
Always EvolvingIt wasn't easy to improve upon the class-leading design and function of our D3 helmet, but we made it happen. Built with an aerospace shell design and materials, we were able to get the D4 Composite helmet to 1050 grams without sacrificing any strength. MIPS C2 protection system is used to add an additional layer of safety in the event of a fall. For comfort, the D4 Comp routes cooling air through a front air intake system that flows through the polymer center and power grid side mesh keeping your head cooler during the ride. X-static® and XT2® anti-microbial/anti-odor padding keep the inside of the helmet a much nicer place to be. Key Features: Intended for BMX, Downhill or All-Mountain use,Aerospace composite shell,Lightest Composite DH/BMX Race helmet we have ever built 1050g (+/- 50g and Size M),MIPS C2 brain protection system-protects against rotational impacts,24 total vents: 10 front intake ports, 5 overhead intake vents that channel air on top of your head and an industry leading 7 rear exhaust ports,3 Shell sizes and 3 EPS sizes, 6 total size ranges from XS-XXL,Anti-Microbial/Quick Dry XT2® Quick release contoured 3D cheek pads create an ,anatomically optimized fit. Separately placed X-Static® & XT2® precision fit headliner with 7 anchor points gives you optimal fit,EPP Collarbone impact system; a relief area reduces the forces in the center lower section of the helmet where shoulder/collarbone impacts have been known to occur,Drawstring helmet bag included, 3-year warranty,CERTIFIED FOR: ASTM F1952 DH MTB, ASTM F2032 BMX, CPSC 1203, CE N1078, AS/NZS 2063.
Design and FunctionD3 Fiberlite features many of the racing-derived features found on its top-shelf D3 Carbon and Composite siblings. The D3 Fiberlite sources a lightweight fiberglass shell with wind-tunnel proven aerodynamics and an efficient ventilation system. The Fiberlite also delivers a comfy, secure fit from its 3D cheek pads, as well as TLD's signature styling and attention-grabbing graphics. Thanks to the D3 Fiberlite, the most decorated helmet in professional racing is now available for riders who crave factory performance. Key Features: Intended for BMX, Downhill or All-Mountain use,Lightweight Fiberglass shell construction with an overall helmet weight of 1225 grams,20 high-flow intake and exhaust ports for maximum ventilation,Added EPS and new head-form shape for improved impact performance,Quick-release cheek pads for emergency helmet removal,Exceeds bicycle certifications: ASTM F1952-15, ASTM F2032-15,Not intended for use with motorized vehicles.
Standing out from the crowd with Troy Lee’s legendary styling, the Flowline MIPS Helmet features much of Troy Lee Designs’ best technology at a low price. Sporting a modern, minimalist look, it is designed to keep you protected and comfortable on the singletrack.This is a great value, modern and clean-looking helmet that offers incredible safety features, a great fit and all-day comfort in a package that is sure to attract admiring looks on the trail.Key FeaturesMIPS technology to protect against rotational forces,EPS foam guards against high speed impacts,Outer shell strengthened by full wrap, in-mould construction,Extended coverage guards the back of your head,Easy to size using the TLD precision fit system,14 high-flow ventilation ports keep your head cool and dry,With soft, replaceable liner,Bears 2-way adjustable, screwless visor.
After years of research and development, Troy Lee Designs introduced the A1 mountain bike helmet in 2013. This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging single track, riding dirt jumps or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection and style you want. Key Features: Reinforced polycarbonate shell in-moulded with the EPS liner extends down the sides and back of the head for maximum protection and durability 8 pressurized intake passages draw in cool air for maximum ventilation 8 rear vacuum vortex outlets help exhaust and draw heat from the head Triple position adjustable retention system allows customized fit for various eyewear, head shape and riding styles Single-piece, ultra-plush, removable and washable comfort liner made of anti-microbial moisture-wicking material for a dry, comfortable feel Full-spectrum adjustable moto inspired visor with anodized aluminium hardware
After years of research and development, Troy Lee Designs introduced the A1 mountain bike helmet in 2013. This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging single track, riding dirt jumps or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection and style you want. Key Features: Reinforced polycarbonate shell in-moulded with the EPS liner extends down the sides and back of the head for maximum protection and durability 8 pressurized intake passages draw in cool air for maximum ventilation 8 rear vacuum vortex outlets help exhaust and draw heat from the head Triple position adjustable retention system allows customized fit for various eyewear, head shape and riding styles Single-piece, ultra-plush, removable and washable comfort liner made of anti-microbial moisture-wicking material for a dry, comfortable feel Full-spectrum adjustable moto inspired visor with anodized aluminium hardware
The Skyline Short strikes the perfect balance between a casual cut and race performance. A revised 2-way stretch rear panel provides an improved fit and features breathable mesh for better cooling. The mountain bike shorts also feature the Troy Lee Designs Air Comp liner with a TMF pad. Praised for its combination of performance and value, the Skyline is now made from Bluesign certified approved fabric making the shorts environmentally sustainable. Key Features 95% Coolmax® Polyester/5% Lycra® Bluesign certified approved fabric with warp and weft stretch material Single TLD low profile snap button with Velcro backing for secure closure Improved fit with revised rear 2-way stretch panel TLD Air Comp liner with pad Slim TLD embossed Velcro waist adjusters Inner waistband silicone grip
Troy Lee Designs A2 helmet redefines mountain bike safety, style, comfort and ventilation. The first helmet in its class to combine EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that will set a new benchmark for mountain bike helmets. TLD took the popular A1 and perfected it, resulting in the incredible A2. Overall, the A2 offers a higher level of protection thanks to the reinforced shell liner and MIPS technologies available in certain models. It has fantastic ventilation which comes from the six large pressurizing intake passages and seven rear vacuum exhausts which are linked by deep internal channelling to promote efficient cooling and airflow. A combination of quick-wicking foam liner, adjustable rear stabilizer and a no fuss fit system for a perfect fit every time, this will be the go-to helmet for hitting the trails. MIPS Patented Brain Protection System MIPS stands for Multi-directional Impact Protection System, it is a revolutionary technology that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angled impacts. Key Features: Ventilation Features Huge air intakes - 25% larger than a1 - connected to massive exhaust ports through deep internal channels provide powerful cooling efficiency *New for 2018, updated x-static® pure silver comfort liner with more material for comfort delivers high-performance odour protection and quick-dry moisture wicking Safety Features MIPS brain protection system reduces rotational forces to the brain in some crash scenarios Dual-density eps co-moulded with EPP for state-of-the-art impact energy management at low and high crash speeds as well as everything in between 16% more eps+epp in the frontal lobe and raised eps splines to provide more protection in the common impact zones Aerospace filament-reinforced polycarbonate shell Break-away anodized aluminium visor screws Fit Features Rear stabilizer fit system with flexible, slimline arms has 3-position front and rear locations for a custom fit Expanded field of view works with both goggles and glasses Multiple storage locations for glasses *New for 2018 adjustable strap dividers for a perfect fit every time Additional features Fit Kit Ventilated helmet storage bag Sticker kit 3-year warranty 350 grams ( size m/l ) Meets or exceeds CE en 1078
Troy Lee Designs A2 helmet redefines mountain bike safety, style, comfort and ventilation. The first helmet in its class to combine EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that will set a new benchmark for mountain bike helmets. TLD took the popular A1 and perfected it, resulting in the incredible A2. Overall, the A2 offers a higher level of protection thanks to the reinforced shell liner and MIPS technologies available in certain models. It has fantastic ventilation which comes from the six large pressurizing intake passages and seven rear vacuum exhausts which are linked by deep internal channelling to promote efficient cooling and airflow. A combination of quick-wicking foam liner, adjustable rear stabilizer and a no fuss fit system for a perfect fit every time, this will be the go-to helmet for hitting the trails. MIPS Patented Brain Protection System MIPS stands for Multi-directional Impact Protection System, it is a revolutionary technology that lets the helmet slide relative to the head, adding more protection against rotational violence to the brain caused by angled impacts. Key Features: Ventilation Features Huge air intakes - 25% larger than a1 - connected to massive exhaust ports through deep internal channels provide powerful cooling efficiency *New for 2018, updated x-static® pure silver comfort liner with more material for comfort delivers high-performance odour protection and quick-dry moisture wicking Safety Features MIPS brain protection system reduces rotational forces to the brain in some crash scenarios Dual-density eps co-moulded with EPP for state-of-the-art impact energy management at low and high crash speeds as well as everything in between 16% more eps+epp in the frontal lobe and raised eps splines to provide more protection in the common impact zones Aerospace filament-reinforced polycarbonate shell Break-away anodized aluminium visor screws Fit Features Rear stabilizer fit system with flexible, slimline arms has 3-position front and rear locations for a custom fit Expanded field of view works with both goggles and glasses Multiple storage locations for glasses *New for 2018 adjustable strap dividers for a perfect fit every time Additional features Fit Kit Ventilated helmet storage bag Sticker kit 3-year warranty 350 grams ( size m/l ) Meets or exceeds CE en 1078