Don't let bad weather keep you from the fun and adrenaline rush of your mountain bike ride. The Descent MTB Cycling Jacket is made with a 3-layer membrane construction, rated 10k/10k for waterproofness and breathability, keeping you comfy when conditions turn wild. Soft and stretchy, the Descent also makes sure you can remain nimble when muddy conditions demand lightning-quick reactions. For the very worst of conditions, the over-the-helmet hood, with 3-way draw cords, lets you seal out the elements completely. A drop-tail hemline also adds extra coverage from the muck and mud kicked up off your rear wheel. A waist adjuster also lets you cinch in your jacket, sealing in warmth nicely. TLD Race Fit The Race Fit is slightly more tailored than TLD’s Ride Fit. The modern cut sees tapered legs on pants and a slimmer flap-free fit of jerseys and jackets. The fit still makes accommodations for padding up but with the flexibility to move with ease. It gives the perfect combination
Just because it's raining, doesn't mean an end to your mountain biking fun. In fact, it can be the most fun as you take on slippery, challenging trails that constantly change and keep you on your mountain biking toes. And with the waterproof MTB AllMtn 4.0 Jacket, you can ride in complete comfort as you enjoy the wet-weather trail challenge. Heavy Rain. No Problem. The All Mountain 4.0 has been engineered specifically for mountain biking in wet weather. With a highly waterproof outer, rated to 10,000mm, prolonged periods of rain won't leave you soaked. Leatt have also added a dirt, water and stain-resistant fabric coating, preventing water and mud from immediately soaking in. The excellent waterproof performance is matched by excellent breathability too. Rated to 10,000g/m2, this prevents you from getting a drenching from sweat build-up. However, on a long climb, it can also often pay to increase airflow and here the ClimbVent connector lets you pedal with your jacket wide open - vital for cool comfort during your longer climbing efforts. When the weather is particularly foul, the Ride Adaptive Hood system also adds even more weather protection. Fitting over your MTB helmet, you can get instant comfort when rain clouds burst. And the Magnetic hood system keeps the hood in place when not in use. Or when pulled up, it fixes the hood to your helmet with the supplied helmet magnet. No more slipping hood. Genius. Built Tough As you brush past trees and bushes and even contend with the odd fall, the Brush Guard reinforced elbows add extra durability and cut resistance. The same feature can be found at the shoulders, improving grip with backpack straps and resisting the constant rubbing of the straps in this area. The fit is tailored specifically for mountain biking, with all-way stretch allowing you to move easily and freely - just the ticket for when trails and grip levels are constantly changing. On the left arm, a pass pocket keeps your lift pass safely stashed away and you'll also find a microfibre goggle wipe, keeping your focus clear as you whip along the trail.
All-weather MTB Weather Protection Why let damp and windy weather keep you from your mountain biking fun. Pull on the Women's MTB HydraDri 2.0 Jacket and you have the excellent waterproof and breathable HydraDri fabric to lock out both wind and rain. Whether you experience a short rain shower or a prolonged period of rain, the 10,000mm waterproof rating will keep you dry for longer. Excellent breathability also prevents you from feeling damp when putting in stints of harder pedalling. If you do want extra ventilation though, the ClimbVent connector lets you pedal with your jacket wide open - vital for cool comfort on those longer climbing efforts. Should the rain really turn heavy, the Ride Adaptive Hood system is a welcome addition. Fitting over your MTB helmet, you can get instant comfort when rain clouds burst. And the Magnetic hood system keeps the hood in place when not in use. Or when pulled up, it fixes the hood to your helmet with the supplied helmet magnet. Genius. Fully Featured for Mountain Biking Inside the jacket, the X-Flow mesh inner lining enhances comfort and moisture management. The lightweight stretch fit and tailored cut are a boon when you're navigating rough mountain bike trails. Stretch fit cuffs and hem also give a sleek and comfortable fit. Two handwarmer pockets offer refuge for cold hands and when conditions improve, the 2.0 can be folded into its own chest pocket, making storage easy.
Bad Weather? No Excuses. With rain all but guaranteed, you may be put off from your mountain biking plans. But with its HydraDri MAX stretch shell and taped seams, the MTB HydraDri 5.0 Jacket is going to keep you nicely dry and comfortable on the trails. With waterproof and breathable ratings of 30.000mm and 30.000g/m2 respectively, rain is kept out and sweaty pedals up won't leave you drenched inside either. Leatt have also added a dirt/water/stain-resistant coating to fend off muddy splashes and general riding grime. Ride Adaptive Hood (RAhD) Should light rain turn into a torrential downpour, the Ride Adaptive Hood system offers welcome extra protection. Fitting over your MTB helmet, you can get instant comfort when rain clouds burst. And the Magnetic hood system keeps the hood in place when not in use. Or when pulled up, it fixes the hood to your helmet with the supplied helmet magnet. Genius. Ride Ready The unique Leatt ClimbVent lets you open the jacket entirely for maximum ventilation on climbs but without flapping or getting in the way of your pedalling and movement. There are also zipped side vents with which you can control airflow to your core. Anti-Slip Shoulder patches ensure that your backpack will stay in place when the rain starts falling and brush guards on the forearms keep your jacket safe from snags. There's also a seat gripper, preventing your jacket from riding up, and keeping you fully protected at all times.
When you're up on the trails, you can experience quick changes in the weather. And that's where the MTB Trail 1.0 Jacket come in. Whether it's a chilly feeling as you gain altitude or misty, damp conditions descend, the Trail 1.0 provides wind- and water-resistant protection that will add comfort until conditions improve. While it's not going to keep you dry all day, it's just right as an emergency option. The slim and comfortable fit strikes the ideal balance between easy movement and minimal flapping. The 4-way stretch also ensures you enjoy unhindered movement as you throw your bike about. There's also a hood that fits under your MTB helmet and reinforced elbow patches to fend off snags and scratches.
Riding in the wet and over muddy trails is brilliant fun. Lots of slipping, sliding and laughter as you battle to keep control of your mountain biking. And to ensure you can stay out and enjoy the fun for longer, Leatt have created the awesome, and weather-proof, Junior MTB HydraDri 2.0 Mono Suit. Keep Riding. No Matter What. Made from Leatt's HydraDri 3-layer waterproof baric, the Junior 2.0 Mono Suit is perfectly suited to wet and windy days on the bike. The excellent waterproof rating provides a barrier against water getting in while excellent breathability makes sure the sweat you generate can get out too. The result is you remain drier and more comfortable for longer, even during heavy rain and more intense sections of trail. Seams are also taped to prevent water from seeping in over the course of your ride. A soft inner also provides excellent comfort and warmth. Leatt have also specced YKK Aquaguard water-resistant zippers, preventing water from getting in there. Lastly, the Ride Adaptive Hood (RAhD) is designed to fit over almost all full-face/open face MTB helmets - perfect for pulling up during a sudden downpour. Fit for Riding Slippery muddy trails require a whole lot of moving and shifting of body weight and quick reactions as tyre grip comes and goes. And with this in mind, the Junior 2.0 Mono Suit has plenty of stretch, enabling you to move without restriction. The active fit is also tailored for mobility and it also gives space for body armour should you want to pad up. Cool and Comfortable Even in wet and wild weather, mountain biking can soon leave you feeling hot and sweaty. But that's not a problem. Leatt's ClimbVent connector allows you to open your suit up when taking on tough pedalling sections.
There's a huge amount of fun to be had from mountain biking in the rain and the mud. And it's a great test of bike skills too. But no one wants to get soaked through and have to cut the fun short. And that's why Leatt created the MTB HydraDri 3.0 Mono Suit. Perfect for romping around when the weather is foul. Keep Riding. No Matter What. Made from Leatt's HydraDri 3-layer waterproof baric, the 3.0 Mono Suit is perfectly suited to wet and windy days on the bike. The excellent waterproof rating provides a barrier against water getting in while excellent breathability makes sure the sweat you generate can get out too. The result is you remain drier and more comfortable for longer, even during heavy rain and more intense sections of trail. Seams are also taped to prevent water from seeping in over the course of your ride. A soft inner also provides excellent comfort and warmth. Leatt have also specced YKK Aquaguard water-resistant zippers, preventing water from getting in there. Lastly, the Ride Adaptive Hood (RAhD) is designed to fit over almost all full-face/open face MTB helmets - perfect for pulling up during a sudden downpour. Fit for Riding Slippery muddy trails require a whole lot of moving and shifting of body weight and quick reactions as tyre grip comes and goes. And with this in mind, the 3.0 Mono Suit has plenty of stretch, enabling you to move without restriction. The active fit is also tailored for mobility and it also gives space for body armour should you want to pad up. Cool and Comfortable Even in wet and wild weather, mountain biking can soon leave you feeling hot and sweaty. But that's not a problem. Leatt's ClimbVent connector allows you to open your suit up when taking on tough pedalling sections. Vents to the sides and legs also allow you to boost cool airflow. Ready to Roll The HydraDri 3.0 Mono Suit is bristling with features made for mountain biking. This includes abrasion-resistant zones in vulnerable areas and anti-slip shoulders for when you're using a backpack. Three pockets provide plenty of storage and a microfiber goggle wiper lets you keep your vision clear. What more could you ever need?
There are days when your standard wet-weather mountain biking gear just doesn't cut it. when you want total protection but with all the features for a great day on the trails, turn to the MTB HydraDri 5.0 Mono Suit. Keep Riding. No Matter What. So how does the 5.0 Mono Suit deal so well with foul weather? It all begins with Leatt's HydraDri MAX material. This 3-layer fabric is extremely waterproof and breathable, keeping rain firmly out while warm sweat vapour can escape easily. The result is you remain drier and more comfortable for longer, even during downpours and harder exertions. Seams are also taped to prevent water from seeping in over the course of your ride. A soft inner also provides excellent comfort and warmth. Leatt have also specced YKK Aquaguard water-resistant zippers, preventing water from getting in there. Lastly, the Ride Adaptive Hood (RAhD) is designed to fit over almost all full-face/open face MTB helmets - perfect for pulling up during a sudden downpour. Fit for Riding Slippery muddy trails require a whole lot of moving and shifting of body weight and quick reactions as tyre grip comes and goes. And with this in mind, the 5.0 Mono Suit has plenty of stretch, enabling you to move without restriction. The active fit is also tailored for mobility and offers space for body armour should you want to pad up. An internal brace system is also unique to the suit. This lets you get the fit and feel just right for you. And should you want to pull the jacket down at a lunch stop, this ensures your trousers stay in place. Cool and Comfortable Even in wet and wild weather, mountain biking can soon leave you feeling hot and sweaty. But that's not a problem. Leatt's ClimbVent connector allows you to open your suit up when taking on tough pedalling sections. Vents to the sides and legs also allow you to boost cool airflow. Ready to Roll The HydraDri 5.0 Mono Suit is bristling with features made for mountain biking. This includes abrasion-resistant zones in vulnerable areas and anti-slip shoulders for when you're using a backpack. A total of 6 pockets provide plenty of storage and a microfiber goggle wiper lets you keep your vision clear. What more could you ever need?
All-weather MTB Weather Protection Why let damp and windy weather keep you from your mountain biking fun. Pull on the MTB HydraDri 2.0 Jacket and you have the excellent waterproof and breathable HydraDri fabric to lock out both wind and rain. Whether you experience a short rain shower or a prolonged period of rain, the 10,000mm waterproof rating will keep you dry for longer. Excellent breathability also prevents you from feeling damp when putting in stints of harder pedalling. If you do want extra ventilation though, the ClimbVent connector lets you pedal with your jacket wide open - vital for cool comfort on those longer climbing efforts. Should the rain really turn heavy, the Ride Adaptive Hood system is a welcome addition. Fitting over your MTB helmet, you can get instant comfort when rain clouds burst. And the Magnetic hood system keeps the hood in place when not in use. Or when pulled up, it fixes the hood to your helmet with the supplied helmet magnet. Genius. Fully Featured for Mountain Biking Inside the jacket, the X-Flow mesh inner lining enhances comfort and moisture management. The lightweight stretch fit and tailored cut are a boon when you're navigating rough mountain bike trails. Stretch fit cuffs and hem also give a sleek and comfortable fit. Two handwarmer pockets offer refuge for cold hands and when conditions improve, the 2.0 can be folded into its own chest pocket, making storage easy.
All-weather MTB Weather Protection Why let damp and windy weather keep young mountain bike rippers from their mountain biking fun. Pull on the Junior MTB HydraDri 2.0 Jacket and they have the excellent waterproof and breathable HydraDri fabric to lock out both wind and rain. Whether experiencing a short rain shower or a prolonged period of rain, the 10,000mm waterproof rating will keep young riders dry for longer. Excellent breathability also prevents them from feeling damp when putting in stints of harder pedalling. If extra ventilation is needed though, the ClimbVent connector allows pedalling with the jacket wide open - vital for cool comfort on those longer climbing efforts. Should the rain really turn heavy, the Ride Adaptive Hood system is a welcome addition. Fitting over almost any MTB helmet, it gives instant comfort when rain clouds burst. And the Magnetic hood system keeps the hood in place when not in use. Or when pulled up, it fixes the hood to the helmet with the supplied helmet magnet. Genius. Fully Featured for Mountain Biking Inside the jacket, the X-Flow mesh inner lining enhances comfort and moisture management. The lightweight stretch fit and tailored cut are a boon when navigating rough mountain bike trails. Stretch fit cuffs and hem also give a sleek and comfortable fit. Two handwarmer pockets offer refuge for cold hands and when conditions improve, the 2.0 can be folded into its own chest pocket, making storage easy.
No Such Thing as Bad Weather. With the MTB HydraDri 4.0 Jacket, there really is no such thing as bad weather. That's because you have the protection of the Hydradri EVO membrane, waterproof and breathable 20,000mm/20,000m2 soft-shell fabric. Be it light rain or a torrential downpour, the jacket does a brilliant job of preventing water from getting inside and ruining your day. Excellent breathability also means those rowdy downhills and tough uphills won't leave you soaked in sweat either. There are also front and rear zipped vents, letting you control body temperature and airflow quickly and easily when you feel yourself overheating. Ride Adaptive Hood (RAhD) Should light rain turn into a torrential downpour, the Ride Adaptive Hood system offers welcome extra protection. Fitting over your MTB helmet, you can get instant comfort when rain clouds burst. And the Magnetic hood system keeps the hood in place when not in use. Or when pulled up, it fixes the hood to your helmet with the supplied helmet magnet. Genius. Ride Ready The unique Leatt ClimbVent lets you open the jacket entirely for maximum ventilation on climbs but without flapping or getting in the way of your pedalling and movement. Anti-Slip Shoulder patches ensure that your backpack will stay in place when the rain starts falling and brush guards on the forearms keep your jacket safe from snags. There's also a seat gripper, preventing your jacket from riding up, and keeping you fully protected at all times.
From the shelter of the valley, where conditions are cool but fine to the more exposed wind-blown hilltops, you'll often encounter all sorts of weather, good and bad, in the space of one mountain bike ride. And for such riding the Women's MTB AllMtn 2.0 Jacket will keep you protected should conditions take a turn for the worse. Bad Weather for MTBing? There's No Such Thing. Weather protection begins with its use of a reliable waterproof and breathable material. Rated to 5.000mm/5.000g/m2 waterproof and breathable respectively, this ensures short sharp showers and prolonged periods of light rain don't leave you drenched. The breathability also prevents a drenching from sweat build-up too. If you do want extra ventilation though, the ClimbVent connector lets you pedal with your jacket wide open - vital for cool comfort on those longer climbing efforts. The Ride Adaptive Hood system also adds extra weather protection. Fitting over your MTB helmet, you can get instant comfort when rain clouds burst. And the Magnetic hood system keeps the hood in place when not in use. Or when pulled up, it fixes the hood to your helmet with the supplied helmet magnet. Genius. Fully Featured Inside the jacket, the X-Flow mesh inner lining enhances comfort and moisture management. The lightweight stretch fit and tailored cut is a boon when you're navigating rough mountain bike trails. Stretch fit cuffs and hem also give a sleek and comfortable fit. Two handwarmer pockets offer refuge for cold hands and when conditions improve, the 2.0 can be folded into its own chest pocket, making storage easy.