Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Road Stainless Steel Bottom BracketThe eagerly anticipated road specific external bottom bracket is now available. The machined aluminium cups hold full stainless steel cartridge bearings.These custom, Swiss made bearings are double sealed, fully serviceable and removable which gives a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.Features: External bottom bracket designed for threaded bottom brackets The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Cartridge bearings are replaceable Designed to suit 24mm crank axles Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
BB86/92 Outboard ABEC-3 BB,Serviceable, double lip sealed, Enduro bearings,The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance,USA machined aluminium cups for superior durability,Directly replaces all OEM BB86/92 bottom brackets.
Features: PressFit 30 to outboard bottom bracket - compatible with all standard 24 mm axles., Eliminates the need for adaptors., Serviceable, double lip sealed Enduro bearings., USA machined aluminium shell for superior function and durability., Threaded design for easy installation and removal., Fits 68 - 73 mm width shells., Black anodized.,
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
These custom, Swiss made bearings are double sealed, fully serviceable, and removable which give a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers, again increasing life and reliability. Hope uses a noncontact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances. Fits BB92 / BB89.5 / BB86.5 & 100mm BB's for Fat Bikes.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike.This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike.This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit.