These custom, Swiss made bearings are double sealed, fully serviceable and removable which give a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle without using shims or spacers -again increasing life and reliability. Hope use a non-contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. Standard 6 colours are available on cups - red, blue, silver, black, gold and gunmetal, with the centre tubes being black on the stainless and gunsmoke on the ceramic. Please Note: The 68/73mm width option is the universal type for both MTB and Road bikes, it is not the Hope Road Specific Series model. For the Road Specific model, choose the "Stainless Steel Road" option. Tech Tip: the 68/73mm width option is the most commonly used size for threaded road and mountain bike bottom bracket shells. The wider 83mm width is mainly seen on "downhill" (ie. long travel) mountain bikes. Please confirm the width of your bike frame's bottom bracket shell before ordering.
These crank spindle shims will adapt any 24mm non-tapered spindle crank. The shims are based on industry-standard BB30 bottom bracket shells and are easy to install and machined for an exact fit. You will need the 6806 bearings already installed into the BB30 shell to start this conversion. These BB30 bottom bracket adaptors enable you to run a Shimano crankset and other brands with 24mm spindles in bikes that are normally only compatible with 30mm spindle types. Simply press these Wheels Manufacturing BB30 to 24mm Crank Spindle Shims into the BB30 bearings and you’re ready to run your preferred crankset type. Please Note: Not compatible with Cannondale Synapse Frames from 2015 due to a wider BB Shell. Manufacturer's Part Number: WMBB30SHIM
The Seal BMX Mid Bottom Bracket features ultra-smooth, fully sealed bearings and is available for both 19mm and 22mm axle sizes.
This model is designed to be used with carbon MTB MegaExo cranksets on 68mm wide BB30 shells. Ceramic ball bearing with hardened steel races. Full Speed Ahead (FSA) produces world-class bicycle components for road cycling and mountain biking, and they supply many of the world’s leading road and mountain bikers. Their history in the sport and heritage of innovation in design and manufacturing is important to FSA. They’re proud that they constantly invest in their products and range to ensure that they provide the very best components possible – for both professional and enthusiast riders alike.
Adapters to fit a 386Evo chainset into a Bbright bottom bracket shell.
To ensure a smooth rotation that lasts ride after ride, FSA has included stainless steel ball bearings, which sit inside hardened steel races. This ensures this adapting bottom bracket operates efficiently and extends its lifespan. Tech Tip: If you are unsure whether to select the 68mm or the 73mm size, measure underneath your frames bottom bracket shell. Most road bike's BB30 shells are 68mm wide and most mountain bike's BB30 shells are 73mm wide.
If you want to make sure you're making the most of every crank rotation when you're on the road, this is the bottom bracket to pair with your FSA ISIS type road bike chainset. With its forged spindle and large upgraded bearings, it gives you super-smooth rotation and outstanding power transfer. Tech Info: Please note - The first two numbers in our options (eg. "68" 70 or "73") relate to how wide your bike's bottom bracket shell is in millimetres. The other three numbers (eg. 118) relate to how long your current bottom brackets spindle (axle) is in millimetres. The 68 and 73mm sizes are the "English thread" type, the 70mm size is the "Italian thread" type - please measure your bike's bottom bracket shell width to confirm which size you need.
If you want to make sure you're making the most of every crank rotation, this is the bottom bracket to pair with your FSA ISIS type road bike chainset. With its forged titanium spindle and large upgraded bearings, it gives you super-smooth rotation and outstanding power transfer. Tech Info: Please note - The first two numbers in our options (eg. "68" 70 or "73") relate to how wide your bike's bottom bracket shell is in millimetres. The other three numbers (eg. 118) relate to how long your current bottom brackets spindle (axle) is in millimetres. The 68 and 73mm sizes are the "English thread" type, the 70mm size is the "Italian thread" type - please measure your bike's bottom bracket shell width to confirm which size you need.
Made from durable materials, a fully sealed construction and featuring high-quality bearings, this bottom bracket will provide many miles of reliable operation. Please Note: crank arm fixing bolts not included.
There aren’t many times a replacement part actually improves your bike but put one on your bike and you’ll wonder why you didn’t install a NINJA sooner. The bearings are housed in an alloy shell and wrapped with plastic and fibre. This fusion of the three materials provides the bearings a solid platform to sit on and extends their lives. A lot of people would be satisfied with this, but they went even further by extending the alloy shell so the right and left sides lock together. This locks the frame, cranks and bottom bracket together and provides unparalleled stiffness.
The Seal BMX American Bottom Bracket features ultra-smooth fully sealed bearings and is suitable for 19mm axle sizes.
This bottom bracket is equipped with a forged hollow chromoly (CrMo) steel axle, providing riders with a superior strength to weight ratio. Coming kitted out with MegaQuad technology, this model benefits from a deep-groove design, improved external water seals and sealed cartridge bearings.