MRP XCG V2 MTB Chain GuideThe XCg skid plate sits neatly behind your crankset, providing optimal protection for your chainrings. The skid plate has the additional advantage of gliding over rocks and obstacles that it may come into contact with, when out on the trail.Features:Suited to Cross Country and Trail ridingSingle and Dual ring protection for 8/9/10 and 11-speed drivetrainsAdds chainring protection to chainrings within the size rangeReplaceable nylon skid plate glides over rocks and obstacles.Buy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP TR MTB Upper Chain GuideThis upper guide is a genuine replacement for the guide found on many MRP chainguides.Features:Compatible with the G3, AMg (V1 & V2), Micro, 1x (V2 & V3) chainguidesBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP 1x CS Upper Chain GuideBenefitting from MRP’s more than 20 years of experience, the 1x CS Upper Chain Guide takes its design from its popular V3 model, bringing you lightweight and robust chain retention on the roughest cross country (XC) trails. The ideal addition to enhance your 1x10,1x11 or 1x12 speed drivetrain, it’s made with a durable composite backplate and silent operating nylon guide for smooth, distraction-free operation. Perfect for combining with narrow/wide chainrings (including oval types) and “clutch” type rear derailleurs, this easy to install component ensures your chains always stays in place, no matter how rough your ride gets.Features:Material: Backplate: Glass-filled Composite; Upper Guide: Nylon with soft interiorFrame Fitment: Separate ISCG-05 (Two-bolt ISCG-05 mount backplate) or S3/E-Mount optionsChainring Size Compatibility: 28-34T range (oval compatible up to 32T)Use: Cross Country (XC), TrailAdds security to "narrow/wide" 1x10/11/12-Speed and SRAM XX1/X01 11/12-Speed drivetrainsCo-moulded "TR" upper guide with softer durometer interior for silent guidanceTracked and grooved upper guide/backplate interface increases stiffness and eases installationPerfect for "clutched" drivetrainsCompatible with chainlines 49mm and widerOval chainring compatibleBoost compatibleNo crank or chainring removal required for installationMounting hardware included and install possible with just a single 4mm Allen wrenchWeight: 40g (ISCG-05 option)Buy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Chain Guide ISCG 05 Top GuideDesigned by the Nukeproof engineers for performance, this top guide ensures that you don't drop your chain when out on the MTB trails. It features a hard-wearing alloy backplate with a composite top guide. This makes it more than capable of withstanding all the knocks and jolts as you blast across the mountain. Nukeproof has also equipped this trail-ready top guide with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. This guide fits all bikes with an ISCG 05 mount and comes with various washers allowing you to fine tune your chainline setup.Click here to view and download instructions.Click here for a Step by Step Installation GuidePlease note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible.Features: Backplate Material: Alloy Hardware Material: Stainless Steel Use: MTB Compatibility: 28-36T chainrings, Boost and Oval Weight: 45g (guide, 2x bolts & 2x 3mm washers) Manufacturer Part Numbers: Copper: NPCHAGUITG Black: NPCHAGUITGBLK Blue: NPCHAGUITGBLU Grey: NPCHAGUITGGRY Purple: NPCHAGUITGPUR Red: NPCHAGUITGRED Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Chain Guide ISCG 05 Top GuideDesigned by the Nukeproof engineers for performance, this top guide ensures that you don't drop your chain when out on the MTB trails. It features a hard-wearing alloy backplate with a composite top guide. This makes it more than capable of withstanding all the knocks and jolts as you blast across the mountain. Nukeproof has also equipped this trail-ready top guide with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. This guide fits all bikes with an ISCG 05 mount and comes with various washers allowing you to fine tune your chainline setup.Click here to view and download instructions.Click here for a Step by Step Installation GuidePlease note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible.Features: Backplate Material: Alloy Hardware Material: Stainless Steel Use: MTB Compatibility: 28-36T chainrings, Boost and Oval Weight: 45g (guide, 2x bolts & 2x 3mm washers) Manufacturer Part Numbers: Copper: NPCHAGUITG Black: NPCHAGUITGBLK Blue: NPCHAGUITGBLU Grey: NPCHAGUITGGRY Purple: NPCHAGUITGPUR Red: NPCHAGUITGRED Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Chain Guide ISCG 05 Top GuideDesigned by the Nukeproof engineers for performance, this top guide ensures that you don't drop your chain when out on the MTB trails. It features a hard-wearing alloy backplate with a composite top guide. This makes it more than capable of withstanding all the knocks and jolts as you blast across the mountain. Nukeproof has also equipped this trail-ready top guide with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. This guide fits all bikes with an ISCG 05 mount and comes with various washers allowing you to fine tune your chainline setup.Click here to view and download instructions.Click here for a Step by Step Installation GuidePlease note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible.Features: Backplate Material: Alloy Hardware Material: Stainless Steel Use: MTB Compatibility: 28-36T chainrings, Boost and Oval Weight: 45g (guide, 2x bolts & 2x 3mm washers) Manufacturer Part Numbers: Copper: NPCHAGUITG Black: NPCHAGUITGBLK Blue: NPCHAGUITGBLU Grey: NPCHAGUITGGRY Purple: NPCHAGUITGPUR Red: NPCHAGUITGRED Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Chain Guide ISCG 05 Top GuideDesigned by the Nukeproof engineers for performance, this top guide ensures that you don't drop your chain when out on the MTB trails. It features a hard-wearing alloy backplate with a composite top guide. This makes it more than capable of withstanding all the knocks and jolts as you blast across the mountain. Nukeproof has also equipped this trail-ready top guide with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. This guide fits all bikes with an ISCG 05 mount and comes with various washers allowing you to fine tune your chainline setup.Click here to view and download instructions.Click here for a Step by Step Installation GuidePlease note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible.Features: Backplate Material: Alloy Hardware Material: Stainless Steel Use: MTB Compatibility: 28-36T chainrings, Boost and Oval Weight: 45g (guide, 2x bolts & 2x 3mm washers) Manufacturer Part Numbers: Copper: NPCHAGUITG Black: NPCHAGUITGBLK Blue: NPCHAGUITGBLU Grey: NPCHAGUITGGRY Purple: NPCHAGUITGPUR Red: NPCHAGUITGRED Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Chain Guide ISCG 05 Top GuideDesigned by the Nukeproof engineers for performance, this top guide ensures that you don't drop your chain when out on the MTB trails. It features a hard-wearing alloy backplate with a composite top guide. This makes it more than capable of withstanding all the knocks and jolts as you blast across the mountain. Nukeproof has also equipped this trail-ready top guide with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. This guide fits all bikes with an ISCG 05 mount and comes with various washers allowing you to fine tune your chainline setup.Click here to view and download instructions.Click here for a Step by Step Installation GuidePlease note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible.Features: Backplate Material: Alloy Hardware Material: Stainless Steel Use: MTB Compatibility: 28-36T chainrings, Boost and Oval Weight: 45g (guide, 2x bolts & 2x 3mm washers) Manufacturer Part Numbers: Copper: NPCHAGUITG Black: NPCHAGUITGBLK Blue: NPCHAGUITGBLU Grey: NPCHAGUITGGRY Purple: NPCHAGUITGPUR Red: NPCHAGUITGRED Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Chain Guide ISCG 05 Top GuideDesigned by the Nukeproof engineers for performance, this top guide ensures that you don't drop your chain when out on the MTB trails. It features a hard-wearing alloy backplate with a composite top guide. This makes it more than capable of withstanding all the knocks and jolts as you blast across the mountain. Nukeproof has also equipped this trail-ready top guide with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. This guide fits all bikes with an ISCG 05 mount and comes with various washers allowing you to fine tune your chainline setup.Click here to view and download instructions.Click here for a Step by Step Installation GuidePlease note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible.Features: Backplate Material: Alloy Hardware Material: Stainless Steel Use: MTB Compatibility: 28-36T chainrings, Boost and Oval Weight: 45g (guide, 2x bolts & 2x 3mm washers) Manufacturer Part Numbers: Copper: NPCHAGUITG Black: NPCHAGUITGBLK Blue: NPCHAGUITGBLU Grey: NPCHAGUITGGRY Purple: NPCHAGUITGPUR Red: NPCHAGUITGRED Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Chain Guide ISCG 05 Top Guide With BashDesigned by the Nukeproof engineers for performance, this top guide with bash ensures that you don't drop your chain when out on the MTB trails. It features a hard-wearing alloy backplate with a composite top guide. This makes it more than capable of withstanding all the knocks and jolts as you blast across the mountain. Nukeproof has also equipped this trail-ready top guide with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. MTB Top Guide with BashguardReady for intense off-road adventures, this top guide also comes equipped with two bashguards. This allows you to choose from a guard for 32T chainrings or a guard for up to 36T chainrings, so you have everything you need in the box to get riding. One final highlight is the Nukeproof ISCG Top Guide With Bash comes complete with stainless steel hardware. This means you'll benefit from its maximum strength in all-weather conditions. This guide fits all bikes with an ISCG 05 mount and comes with plenty of washers to allow you to fine tune your chainline setup. Click here to view and download instructions.Click here for a Step by Step Installation GuidePlease note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible.Features: Backplate Material: Alloy Hardware Material: Stainless Steel Use: MTB Compatibility: 28-36T chainrings, Boost and Oval Weight: 106g (32t bash, 3x bolts & 3x 3mm washers)Manufacturer Part Numbers: Copper: NPCHAGUITGWB Black: NPCHAGUITGWBBLK Blue: NPCHAGUITGWBBLU Grey: NPCHAGUITGWBGRY Purple: NPCHAGUITGWBPUR Red: NPCHAGUITGWBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Chain Guide ISCG 05 Top Guide With BashDesigned by the Nukeproof engineers for performance, this top guide with bash ensures that you don't drop your chain when out on the MTB trails. It features a hard-wearing alloy backplate with a composite top guide. This makes it more than capable of withstanding all the knocks and jolts as you blast across the mountain. Nukeproof has also equipped this trail-ready top guide with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. MTB Top Guide with BashguardReady for intense off-road adventures, this top guide also comes equipped with two bashguards. This allows you to choose from a guard for 32T chainrings or a guard for up to 36T chainrings, so you have everything you need in the box to get riding. One final highlight is the Nukeproof ISCG Top Guide With Bash comes complete with stainless steel hardware. This means you'll benefit from its maximum strength in all-weather conditions. This guide fits all bikes with an ISCG 05 mount and comes with plenty of washers to allow you to fine tune your chainline setup. Click here to view and download instructions.Click here for a Step by Step Installation GuidePlease note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible.Features: Backplate Material: Alloy Hardware Material: Stainless Steel Use: MTB Compatibility: 28-36T chainrings, Boost and Oval Weight: 106g (32t bash, 3x bolts & 3x 3mm washers)Manufacturer Part Numbers: Copper: NPCHAGUITGWB Black: NPCHAGUITGWBBLK Blue: NPCHAGUITGWBBLU Grey: NPCHAGUITGWBGRY Purple: NPCHAGUITGWBPUR Red: NPCHAGUITGWBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Chain Guide ISCG 05 Top Guide With BashDesigned by the Nukeproof engineers for performance, this top guide with bash ensures that you don't drop your chain when out on the MTB trails. It features a hard-wearing alloy backplate with a composite top guide. This makes it more than capable of withstanding all the knocks and jolts as you blast across the mountain. Nukeproof has also equipped this trail-ready top guide with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. MTB Top Guide with BashguardReady for intense off-road adventures, this top guide also comes equipped with two bashguards. This allows you to choose from a guard for 32T chainrings or a guard for up to 36T chainrings, so you have everything you need in the box to get riding. One final highlight is the Nukeproof ISCG Top Guide With Bash comes complete with stainless steel hardware. This means you'll benefit from its maximum strength in all-weather conditions. This guide fits all bikes with an ISCG 05 mount and comes with plenty of washers to allow you to fine tune your chainline setup. Click here to view and download instructions.Click here for a Step by Step Installation GuidePlease note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible.Features: Backplate Material: Alloy Hardware Material: Stainless Steel Use: MTB Compatibility: 28-36T chainrings, Boost and Oval Weight: 106g (32t bash, 3x bolts & 3x 3mm washers)Manufacturer Part Numbers: Copper: NPCHAGUITGWB Black: NPCHAGUITGWBBLK Blue: NPCHAGUITGWBBLU Grey: NPCHAGUITGWBGRY Purple: NPCHAGUITGWBPUR Red: NPCHAGUITGWBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.