The Park Tool CTPC - Pair Of Replacement Chain Tool Pins fit Park Tool s CT1, CT2, CT3, CT5 and CT7 Chain Tools. Made from hardened alloy tool steel.
The Park Tool CTP4K Replacement Chain Tool Pin Set For The Master Chain Tool includes four replacement pins and one replacement bearing.
The Park Tool CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.
The Park Tool CC2 Chain Checker helps alleviate poor shifting and uneven drive train wear. Most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with the Park Tool Chain Checker. Simply insert the Chain Checker s pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading. Consider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too.
The Park Tool CT-3.3 Professional Chain Tool is a professional quality shop chain tool that works with 1/8", 3/16" single speed chains and 5 to 12-speed / 3/32" road and mountain bike derailleur chains* including SRAM AXS 12-speed, Shimano 12-speed chains and Campagnolo 13-speed chains.A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains, including SRAM AXS 12 speed, as well as 1/8 and 3/16 chainsThe CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivetsBuilt to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pinThe CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivetsMade in the USA and covered by Park Tool's legendary limited lifetime warrantyThe CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). Works with single speed half-links.*The CT-3.3 will install, but not peen, Campagnolo 11, 12 and 13-speed chain rivets (see CT-4.3 or CT-6.3)
The new CM-5.3 Cyclone Chain Scrubber from Park Tool cleans your bicycle chain quickly, easily and effectively without the hassle and mess of removing the chain from the bike.Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikesStrong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chainSpecial wicking sponge draws solvent from the chain as it exits, minimizing drips and messSturdy handle makes the Cyclone easy to use and controlHolds 2 fluid ounces (59ml) of solventThe Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. It works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes.Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain and a special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess. The sturdy handle makes the Cyclone easy to use and control.
The Park Tool CC3.2 Chain Wear Indicator can help identify a worn chain and save you money - worn chains will not only shift poorly but they wear sprockets and chainrings at an accelerated rate. The CC3.2 is a "go, no go gauge designed to accurately indicate when a chain reaches 0.5% and 0.75% wear, the points at which most chain manufacturers suggest replacement for the new super narrow 11 and all other (7, 8, 9 & 10 speed) chains respectively as per most manufacturer's recommendations. The latest 3.2 version of this tool is longer for added accuracy and is made from precision, laser cut steel for long life and quality.
The Park Tool CL1 is a chain lube from Park Tool, the leader in bicycle maintenance products. Using PTFE and a proprietary blend of oils, Park Tool Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Also works great on cables, spoke nipples, and derailleur and brake pivots.Chain Lube from Park ToolPTFE and a Proprietary Blend of OilsWorks Great in Wet or Dry ConditionsPenetrates, Reduces Friction, Prolongs Component LifeProtects Parts from Rust and CorrosionSuitable for Cables, Spoke Nipples, Derailleurs and Brake Pivots
The Park Tool CT5 Mini Chain Brute Chain Tool goes anywhere and actually performs like a shop quality tool. The fine thread, special V -shaped handle, and super strong replaceable pin make chain removal and installation a breeze. The CT5 works on any derailleur chain and has a shelf for loosening tight links. At only 77 grams, it s the perfect take-along chain tool.
The Park Tool HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).Use for both pedal removal/installation and for cassette removalChain whip features improved compatibility with 5 speed to 12 speed mountain and road bike cassettes and freewheelsThe HCW-16.3 is 10.75" long (27.3cm)
The Park Tool Chain Gang Cleaning System contains everything needed to quickly and easily clean the chain, cassette and chainrings. The Cyclone Chain Cleaner makes easy work of getting your chain clean and the Gear Clean brush allows you to clean the rest of your drivetrain such as your chainring, cassette and jockey wheels.Prolong drive train life with this excellent kitContains a Cyclone chain cleaner, Gear Clean brush, and 8 oz. of CB2 Citrus Chain Brite cleaning fluidEverything you need to keep the drivetrain system clean and running super smoothSuitable for derailleur gear, hub gear, and single-speed bikesMade in the USA
The SR12.2 Chain Whip & Sprocket Remover from Park Tool has been specially heat treated to prevent flexing and bending and boasting Park Tool legendary build quality. This Chain Whip also has a sprocket remover which fits Park Tool Freewheel/Cassette lockring tools. This also features a moulded handle which provides a great comfortable grip.