Park Tool Chain Tool (CT3.3)A tough, workshop-level bike chain tool that’s fits nicely in the hand and is simple to operate, Park Tool has made its CT3.3 model with a hard-wearing investment cast steel. It’s suitable for use with all single and multi-speed chains, including modern SRAM 12-Speed and Campagnolo 13-Speed types. Certain to become your go-to tool for changing and repairing chains, this versatile tool has a replaceable pin, making it ideal for busy bike mechanics.Features:Comfortable T-handle Replaceable driving pin (replacement pins sold separately - Park Tool part number: CTP-C) Investment cast steel body Adjustable locating shelf Compatible with all 5 to 13-Speed chains, single speed 1/8", 3/16", and half link chains Please Note: The CT-3.3 will install, but not peen (flatten), Campagnolo 11, 12 and 13-speed chain rivets.Please Also Note: The shelf fastener sizing is preset to allow easy adjustment from one width chain to another - any attempt to lock the shelf in place will result in damage to the tool. Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
A worn chain shifts poorly and wears sprockets at an accelerated rateThe CC-3 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.75% and 1% wear - the point at which most chain manufacturers suggest replacementThe chain should be replaced soon if the 0.75% side fits into the chain before other drive train components also start to wear out fastIf the 1% side fits into the chain the chain is worn out and should be replaced immediatelyMade from precision laser cut steelConsider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too10-speed compatible
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The CG-2.4 contains everything needed to quickly and easily clean the chain cogs and chainrings: CM-5.3 CYCLONE™ CHAIN SCRUBBER Clean bicycle chains quickly easily and effectively without the hassle and mess of removing the chain from the bike. The CM-5.3 uses an extra-large solvent reservoir and a series of four rotating brushes to get chains sparkling clean inside and out. A magnet at the bottom of the CM-5.3's solvent reservoir draws away particles scrubbed from the chain effectively keeping them from being redistributed on the chain during cleaning. The durable sponge material draws solvent from the chain as it exits the CM-5.3 reducing drips and mess. The CM-5.3 can handle any bike-specific chain from wide 3/16' single-speed* to narrow 12 and 13-speed. A reversible handle allows the chain to pass through forwards or backwards for compatibility with center drive e-bikes. CB-4 BIO CHAINBRITE Park Tool CB-4 is a 100% biodegradable natural plant-based degreaser formulated for use in the CM-5.3 Cyclone Chain Scrubber CM-25 Professional Chain Scrubber or with a scrubbing brush as a general purpose degreaser. When used with a chain cleaner CB-4 gets bicycle chains clean inside and out so they're good as new. Will not harm alloy plastic rubber or carbon fiber parts so it's safe to use for cleaning cassettes chainrings pulleys or any other component that accumulates muck and grime. GSC-1 GEARCLEAN™ BRUSH The GSC-1 is specially designed to free your bicycle drivetrain from muck and grime. The comfortable handle features a contoured toothed end to reach dirt deep between the gears and tough nylon bristles clean the derailleur and chain. Saves wear and tear on your chain and cassette. Also works great on derailleur pulleys brakes or other places where dirt collects. CG-2.4 FEATURES The Chain and Drivetrain Cleaning Kit includes: CM-5.3 Cyclone™ Chain Scrubber GSC-1 GearClean™ Brush 8 oz. bottle of Bio ChainBrite™ The CG-2.4 works on nearly any bike including multi-speed single-speed and e-bikes. INCLUDES: CM-5.3 Cyclone™ Chain Scrubber — Instructions GSC-1 GearClean™ Brush CB-4 Bio ChainBrite™ — Instructions
A chain lube from Park Tool, the leader in bicycle maintenance productsUsing PTFE and a proprietary blend of oils, Park Tool Chain Lube works great in wet or dry conditionsIt penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosionCan also be used to good effect on cables, spoke nipples, and derailleur and brake pivots4 oz. / 120 mm Bottle
The Park Tool CL1 is a chain lube from Park Tool, the leader in bicycle maintenance products. Using PTFE and a proprietary blend of oils, Park Tool Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Also works great on cables, spoke nipples, and derailleur and brake pivots.Chain Lube from Park ToolPTFE and a Proprietary Blend of OilsWorks Great in Wet or Dry ConditionsPenetrates, Reduces Friction, Prolongs Component LifeProtects Parts from Rust and CorrosionSuitable for Cables, Spoke Nipples, Derailleurs and Brake Pivots
Key Features: Cleans bicycle chain quickly, easily, and effectively without the hassle and mess of removing the chain from the bike, The Cyclone™ uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts, Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes, The handle can be mounted on either side allowing the CM-5.3 to be used easily with e-bikes, Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain, Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess, Sturdy handle makes the Cyclone™ easy to use and control, Holds 2 fluid ounces (59ml) of solve.
The new CM-5.3 Cyclone Chain Scrubber from Park Tool cleans your bicycle chain quickly, easily and effectively without the hassle and mess of removing the chain from the bike.Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikesStrong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chainSpecial wicking sponge draws solvent from the chain as it exits, minimizing drips and messSturdy handle makes the Cyclone easy to use and controlHolds 2 fluid ounces (59ml) of solventThe Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. It works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes.Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain and a special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess. The sturdy handle makes the Cyclone easy to use and control.
Cleans bicycle chain quickly easily and effectively without the hassle and mess of removing the chain from the bike. The Cyclone™ uses a large solvent reservoir hundreds of rotating bristles and a two-step cleaning process to get chains really clean improve shifting performance and extend the life of the chain and other expensive drivetrain parts. Works with all multi-speed bikes (5 6 7 8 9 10 11 and 12-speed) as well as some single-speed models and e-bikes The handle can be mounted on either side allowing the CM-5.3 to be used easily with e-bikes Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain Special wicking sponge draws solvent from the chain as it exits minimizing drips and mess Sturdy handle makes the Cyclone™ easy to use and control Holds 2 fluid ounces (59ml) of solvent
A professional quality shop chain tool that works on single speed as well as 5-12-speed Road and Mountain Bike derailleur chains, including SRAM® AXS 12 speed. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin. The CT-3.3 will install, but not peen, Campagnolo® 11 and 12-speed chain rivets. Made in the USA and covered by Park Tool's legendary limited lifetime warranty
The Park Tool CT-3.3 Professional Chain Tool is a professional quality shop chain tool that works with 1/8", 3/16" single speed chains and 5 to 12-speed / 3/32" road and mountain bike derailleur chains* including SRAM AXS 12-speed, Shimano 12-speed chains and Campagnolo 13-speed chains.A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains, including SRAM AXS 12 speed, as well as 1/8 and 3/16 chainsThe CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivetsBuilt to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pinThe CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivetsMade in the USA and covered by Park Tool's legendary limited lifetime warrantyThe CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). Works with single speed half-links.*The CT-3.3 will install, but not peen, Campagnolo 11, 12 and 13-speed chain rivets (see CT-4.3 or CT-6.3)
Park Tool CT-5 Mini Chain Brute Chain Tool This chain splitting tool is of workshop quality yet manages to be contained in it's very compact form,meaning this is a great tool you can keep either in the garage or in your saddle bag. Park Tool are a well established company that have been producing quality tools for a long time, so you can put your trust in the brand. - T.H Key Features: A chain tool that is small enough to go anywhere, yet which performs like a full size workshop tool Fine thread and slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivets. Includes a loosening shelf to release stiff links after assembly. Replaceable driving pin head Works on most bicycle chains, including 10-speed. Weighs just 77 grams.
Small and compact chain tool performs like a shop quality tool by using a fine threaded shaft and super strong replaceable pin. Nominal Dimensions: 60mm tall, 55mm wide and 15mm thick. Perfect take-along chain tool at only 77 grams. Handy "loosening shelf" to remedy stiff links after reassembly. Compatible with Sram Eagle hollow pin chains. 1/8", 5-12 speed chain tool